|
|
Type VB 400
The VB 400 vertical drilling rig, which has best results in practice, was designed for cased and uncased holes used for dry and mud drilling applications including the special air-lifted drilling and foam drilling.
Because of its extensive equipment and the choice of various vehicles with different features this drilling rig is expandable and can be applied all over the world.
Accessories:
Pipe rotary device with max. diameter 521 mm, cable drilling unit, winch, flush head, centrifugal pump, high-pressure piston pump, compressor, generator, welding generator, injection pump, hydraulic breaking device for leverage
|
|
Vertical drilling rigs
Mobile Drilling Rigs with a Wide Range of Application
SATVIA GmbH always aim at actual trends and demands. We try to offer "polished" product lines.
Vertical drilling rigs are able to drill boreholes with a depth from a few metres up to approximately 1.000 m. A maximum tensile force up to 80 tons can be reached.
Our drilling rigs are applicable for
* Dry drilling
* Mud drilling
* Core drilling
* Air-lifted drilling and
* Hammer blow drilling
So you can find our vertical drilling rigs in the field of
* Well sinking
* Geological analysis
* Earth heat tube drilling
|
|
Type VB 500
The range of strong efficient vertical drilling rigs is completed by the rig type VB 500. Depending on the fitted equipment all drilling operations can be performed.
Borehole depths of 800 m can be reached. But all given depth parameters are non-binding guidelines and depend on normal drilling conditions.
The assembly of all components on a 4-axled truck allows varied possibilities of application.
Accessories:
Winch, flush head, centrifugal pump, high-pressure piston pump, floam pump, compressor, generator, welding generator, hydraulic breaking device for leverage
|
|
Type VB 103
The small, very compact vertical drilling rig is ideal for ground survey and well drilling, usable for dry- or mud drilling.
In accordance with your request this rig can be installed both on an one-axled-trailer and on a caterpillar chassis. This chassis guarantees an extremly low centre of gravity and best off-road property.
The width of the drilling rig is reducible from 1.360 to 850 mm by folding the chassis. Narrow entrances can be gone through without any problems.
Accessories:
Mast extension, cable drilling unit, winch, flushing head, hydraulic blow hammer, pipe rotary device with diameter 219 mm, mud pump
|
|
Type VB 600
Our vertical drilling rig VB 600 represents the highest level of development of our drilling rigs.
Because of the hardest operating conditions the rig was equipped with a chain feeding device. With its enormous pull up force the rig can reach a depth of more than 1.000 m.
Depending on the requirements VB 600 can be equipped for all drilling methods.
Accessories:
Winch, flush head, centrifugal pump, high-pressure piston pump, floam pump, compressor, generator, welding generator, hydraulic breaking device for leverage
|
|
Type VB 152
The vertical drilling rig type VB 152 is a light drilling machine. It can be installed on a trailer, caterpillar chassis or on a small truck.
If it is used a caterpillar chassis, the advantage of the type VB 103 R - reduction of the weidth by folding the chassis - is also possible up to 1.000 mm.
The drilling rig is working full hydraulically. Typical applications are ground survey, exploration drillings (dry and mud drilling) or earth heat tubings.
Accessories:
Pipe rotary device with max. diameter 273 mm, cable drilling unit, winch, complete flushing system, mast extension
|
|
|
Atlas Copco offers a complete line of hydraulic top-head-drive drills designed for waterwell and other applications requiring air or mud rotary, as well as down-hole hammer drilling methods. With a diverse selection of lightweight to heavy-duty rigs, our extensive drill line fulfills a variety of jobsite demands. Choose from the truck-mounted or carrier-mounted drills listed below with a range of pullback ratings, hole depths and hole diameters to fit your drilling needs. Atlas Copco water well drills can be found working around the globe, delivering the power and reliability you have come to expect.
|
|
B105 NG - Technical Data
- Max depth: 38 m
- Max diameter: 1300 mm
- Max depth C.F.A.: 17 m
- Max diameter C.F.A.: 600 mm
- Engine power: 147 kW
- Width of crawler: 2500 ÷ 3600 mm
- Shoes width: 600 mm
Main winch:
- Line pull: 105 kN
Auxiliary winch:
- Line pull: 45 kN
Crowd:
- Extraction force: 140 kN
- Crowd force: 90 kN
Rotary head:
- Torque: 100 kNm
- Drilling speed: 42 rpm
Weight:
- Weight in working condition 30000 kg
|
|
C800 HT H50
- Max depth: 87 m
- Max diameter: 2200 mm
- Max depth C.F.A: 34 m
- Max diameter C.F.A: 1600 mm
- Engine power: 440 kW
- Width of crawler: 3500 ÷ 5000 mm
- Shoes width: 1000 mm
Main winch:
- Line pull: 250 kN
Auxiliary winch:
- Line pull: 110 kN
Crowd:
- Extraction force: 400 kN
- Crowd force: 400 kN
- Stroke: 14000 mm
Rotary head:
- Torque: 545 kNm
- Drilling speed: 9 rpm
Weight:
- Weight in working condition: 125000 kg
|
|
|
|
|
|
Median is a powerful, robust, very complete hydraulic drilling rig with innovating kinematics, alone in the world, patented with an intuitive approach.
Median is able to drill in all positions for the most demanding clients.
Use
Median can drill all work types : tunnels, anchors, ground nails, water-well drilling, micro-piles etc… Median can drill with all method types : bottom hammers, top hammers, rollers, coring, augers, up to 500 ft deep, in all azimuth.
Versatility
Its kinematics makes the rig very versatile, and the erection on a hole is very easy and quick. Median can be equipped with an inboard injection pump to obtain better performance, and with an articulated boom to put rods on the drilling axle. A diesel-electrical unit allows working in tunnels with very minimal pollution.
Performance
Median can be in position above a hole to drill, 3 times quicker than a conventional articulated rig. So it increases the industrial drilling rate a lot. Rotation heads are powerful to drill all types of ground.
Safety
Median is equipped with an articulated control panel which can be at the left or at the right, and with one portable control panel for the translation functions. Median is equipped with passive emergency stops in order to instantaneously stop all the moving functions of the rig, without voluntary human intervention.
|
|
|
WIRTH supplies these drill rigs for special civil engineering in a series with torque levels from 140 - 400 kNm. The machines are mounted on a crawler chassis. Characteristic of all WIRTH rigs is that they can be transported complete with drilling mast. This is an advantage in terms of high mobility and short set-up times. Typical areas of application for these rigs are pile foundations by the dry boring method, the construction of secant pile diaphragm walls, CFA, partial and full displacement boring.
|
|
Apafor 440 and 450
Powerful and versatile drilling rigs able to perform all kind of coring, rotary and rotary-percussion dring operations.
Large speed and torque range thanks to the variable volumetric displacement hydraulic motor.
Fully self-sufficient version at disposal with its injection pump fitting.
DEUTZ diesel engine (440) or HATZ diesel engine (450).
Available with reinforced torque, especially for micro-piling (450MP).
Various technical adaptations possible and numerous options available.
|
|
The fully hydraulic TM 255 crawler drill rig has been developed as a down the hole hammer drill rig for small and medium-sized quarries and drilling companies.
This rig is designed for drill-hole diameters from 92-130 mm and for drill-hole depths up to 32 m.
The TM 255 is a fully hydraulic crawler drill rig with a telescopic boom featuring 360° rotation, carriage with revolver magazine, a powerful down the hole hammer and dust collector.
The undercarriage consists of a frame with crawler undercarriage, the corresponding components and body work and a comfortable FOPS-ROPS cabin. The drill is powered by a diesel engine via hydraulic motors and wheel hub drives.
|
|
The fully hydraulic TM105A crawler drill rig has been developed for use in many areas of the construction industry. It is used for disaggregation in quarries, forest road building, slope reinforcement drilling, drilling for blasting, trench drilling, etc.
The TM 105A is a fully hydraulic crawler drill rig with a articulated boom, carriage, hydraulic hammer and dust collector.
The undercarriage consists of a frame with crawler oscillation and corresponding components and bodywork.
The drill is powered by a diesel engine over hydraulic motors and wheel hub drives.
|
|
M3 E/D - Technical Data
- Engine power: 55/45 kW
- Width of crawler: 850/1200 mm
Mast:
- Stroke of rotary head: 700 mm
- Extraction force: 3000 kg
- Crowd force: 3000 kg
Clamps:
- Diameters: 40 ÷ 254 mm
Rotary head:
- Torque: 8,2 kNm
- Speed range: 330 rpm
Weight:
- in working condition: 5740 kg
|
|
C14 - Technical Data
- Engine power: 165 kW
- Width of crawler: 2530 mm
Mast:
- Stroke of rotary head: 12000 mm
- Extraction force: 140 kN
- Crowd force: 140 kN
Clamps:
- Diameters: 90 ÷ 406 mm
Rotary head:
- Torque: 17900 Nm
- Speed range: 223 rpm
|
|
HYDRAULIC DRILL RIGS
HBR 502 - Technical Data
- Engine power: 82 kW
- Width of crawler: 1600 mm
Mast:
- Stroke of rotary head: 3375 mm
- Extraction force: 30 kN
- Crowd force: 30 kN
Clamps:
- Diameters: 27,5 ÷ 143,5 mm
Rotary head:
- Torque: 6,3 kNm
- Speed range: 80 rpm
Weight:
- in working condition: 7900 kg
|
|
HYDRAULIC DRILL RIGS
HBR 609 - Technical Data
- Engine power: 190 kW
- Width of crawler: 2425 mm
Mast:
- Stroke of rotary head: 4950 mm
- Extraction force: 100 kN
- Crowd force: 100 kN
Clamps:
- Diameters: 68 ÷ 254 mm
Rotary head:
- Torque: 6,3 kNm
- Speed range: 80 rpm
Weight:
- in working condition: 21000 kg
|
|
HYDRAULIC DRILL RIGS
HBR 504 - Technical Data
- Engine power: 147 kW
- Width of crawler: 2070 mm
Mast:
- Stroke of rotary head: 3600 mm
- Extraction force: 35 kN
- Crowd force: 57 kN
Clamps:
- Diameters: 68 ÷ 254 mm
Rotary head:
- Torque: 6,3 kNm
- Speed range: 80 rpm
Weight:
- in working condition: 11000 kg
|
|
|
The DRILL 830 BB unit is the powerful medium size rig suitable for multi-directional drilling operations. The machine has a separated power pack is designed for soil consolidation applications, micro-piling operations, anchors, core drilling and jet grouting.
|
|
|
The DRILL 830 B unit is the powerful medium size rig suitable for multi-directional drilling operations. The machine has a separated power pack is designed for soil consolidation applications, micro-piling operations, anchors, core drilling and jet grouting.
|
|
|
The DRILL 450 is a small size drill rig suitable to work in confined spaces. The equipment is designed to offer the advantages of the medium-size drilling machines.
|
|
|
SummaryYGSL-120 Track-type Multifunctional Drilling Rig is a dual-top drive power head drilling machine of tract chassis with full hydraulic drive .It extends the applied rang of construction. The rig is applied to the big tonnage stress anchoring hole for water power station, railway, highway, the high-pressure jet grouting hole in the gravel land and to the demolishing hole of construction. It is also used to drill small size water well and foundation pile holes, as well as drainage well.
|
|
Terex® R20C Hydraulic Track Drills
The R20 / R20C utilizes the robust HPR4519 rock drill that is field serviceable, and has fewer total parts than competitors, making service a breeze. We offer optional 51 mm steel capability on and reliable linear rod changer that provides trouble free operation. The R20 is powered by Isuzu 6 cylinder tier II engine. Dust collector is powerful and efficient and our hydraulic system is simple and easily maintained.
SPECIFICATIONS R20C HYDRAULIC TRACK DRILL
Hole Diameter Up to 4" (102 mm)
Power Unit Isuzu
Fuel Tank Capacity 80 gallons (303 L)
Air Compressor Up to 250 cfm @ 150 psi
Rock Drill HPR4519 25 hp (19 kW)
Rod Changer Imperial 5 rods; 12' or 14'
Rod Changer Metric 5 rods; 3,658 or 4,267 mm
|
|
As the name suggests, foundation machines are used to build supporting pillars that make up the foundations of a building. Piles are broadly categorized into cast-in-place piles and ready-made piles.
We offer earth drills for cast-in-place piles, and pile drivers for ready-made piles.
|
|
|
|
|
|
YTRD160
Rotary drilling rig
Special Features:
Automatic power control function of engine speed realizes the closed-loop control on engine speed, hydraulic system pressure, and main pump output so as to ensure the engine cannot overload
Advanced negative flow rate control (CAT chassis) is adopted for the main oil way to ensure the flow rate is supplied upon demand
Override control with constant power and electrical power takes full advantage of the engine power
Key Specifications：
Maximum drilling diameter: 1,500mm
Maximum drilling depth: 55m
Rated output torque: 160N.m
Maximum output torque: 163N.m
Drilling speed: 7 to 32rpm
Maximum pressurized force of pressurized oil cylinder: 150kN
Maximum lifting force of pressurized oil cylinder: 165kN
Pressurized stroke of oil cylinder (S): 5,000mm
Angle of left/right inclination of mast: 6 degrees
Angle of forward inclination of mast: 5 degrees
Engine manufacturer: Caterpillar
Engine model: C7 ACERT electronic injection
Power: 147kW
Lifting force of main winch (first layer): 210KN
Wire rope diameter of main winch: 28mm
Maximum lifting speed of main winch: 77m/min
Lifting force of auxiliary winch (first layer): 120kN
Wire rope diameter of auxiliary winch: 20mm
Maximum lifting speed of auxiliary winch: 70m/min
Chassis model: CAT325D
Crawler belt width: 800mm
Equipment width in working state: 4,300mm
Equipment height in working state (H): 20,000mm
Equipment length in transporting state (L): 14,550mm
Equipment width in transporting state: 3,000mm
Equipment height in transporting state (h): 3,350mm
Chassis length (wheel track) (A): 4,300mm
Tractive force: 370kN
|
|
|
|
|
|
YTR260
Rotary drilling rig
Maximum drilling diameter: 2,000mm
Maximum drilling depth: 83m
Rated output torque: 260Nm
Maximum output torque: 265Nm
Drilling speed: 7 to 28rpm
Maximum pressurized force of pressurized oil cylinder: 215kN
Maximum lifting force of pressurized oil cylinder: 230kN
Pressurized stroke of oil cylinder (S): 5,330mm
Angle of left/right inclination of mast: 6°
Angle of forward inclination of mast: 5°
Engine manufacturer: Caterpillar
Engine model: C9 ACERT electronic injection
Power: 261kW
Lifting force of main winch (first layer): 270kN
Wire rope diameter of main winch: 32mm
Maximum lifting speed of main winch: 80m/min
Lifting force of auxiliary winch (first layer): 120kN
Wire rope diameter of auxiliary winch: 20mm
Maximum lifting speed of auxiliary winch: 70m/min
Chassis model: CAT330D
Crawler belt width: 800mm
Equipment width in working state: 4,300mm
Equipment height in working state (H): 22,580mm
Equipment length in transporting state (L): 16,700mm
Equipment width in transporting state: 3,000mm
Equipment height in transporting state (h): 3,450mm
Chassis length (wheel track) (A): 4,600mm
Tractive force: 510kN
|
|
|
|
|
|
Drill Rigs
Fordia offers a complete range of powerful and reliable drill rigs to fit your specific needs. Whether you're looking for a surface or underground drill, or even a heliportable machine, our technical support team can help you choose the drill rig you are looking for.
[Surface Drill Rig]
Golden Bear 1400m N
The Fordia Golden Bear 1400m N is a powerful and reliable drill rig for diamond drilling. Its modular design simplifies handling and assembly and the rig can be upgraded by changing the feed cylinder and the rotary engine, if greater depth capacity is needed. Efficient and built tough for durability, the Fordia Golden Bear 1400m N is perfect for surface applications.
* Powerful and reliable surface diamond drill rig
* Modular design for easier manipulation
* Accomodates most drill rods, including P sizes
* Can be upgraded for even greater depth capacity
[Heliportable Drill Rig]
Silver Bear A5 1300m N
The Fordia Silver Bear A5 1300m N is a great heliportable surface drill rig. Mounted on two separate and compact skids, it offers pure power yet convenience for transportation in mountainous or remote areas. Designed and produced in conjunction with structural and hydraulic engineers, the Silver Bear A5 is a powerful machine meant to drill hard.
* Designed to be broken down quickly and easily for heli-moves
* Disassembled drill is light enough to be moved using a Hughes 500D machine
* Industry leading synchronized chuck and foot and one-handed valve operation
* Outstanding rod handling ability
* Finest quality available of components produced to very tight tolerances for easier replacement
|
|
RDSH1000 Hydraulic Rotary Head
The RDSH1000 is the largest rotary head manufactured by TEI Rock Drills and supplies 10,000 ft/lbs of torque to the drill string. This rotary head is used on the HEM1000 excavator drill and also is an option on the TD75 limited access drill. It is primarily used to turn down hole hammers up to 12-inch and used to install casing for micropiles.
The RDSH1000 is a sturdy and reliable rotary head. Unlike the competition this head has a cast housing that is heat-treated the same as our percussion parts, giving added strength and durability to the RDSH100. If you need a high torques head that you can count on turning everyday then the RDSH1000 will be your solution.
|
|
Terex® 650 Auger Drill
Terex auger drills offer a superior performance edge for increased efficiency and adaptability. A low center of gravity gives them exceptional stability. A high-speed hydraulic system and convenient operator controls provide the fastest cycle time.
SPECIFICATIONS 650 AUGER DRILL
Maximum Hole Diameter: 60" (1,524 mm)
Maximum Hole Depth: 50' (15.25 m)
Torque: 0-43,404 ft-lbs (59,029 Nm)
Crowd (Rated Capacity): 24,500 lbs (11,123 kg)
Hoist (Rated Capacity): 18,000 lbs (8,172 kg)
Kelly Bar: 5" (127 mm) sq. outer x 3-1/2" (89 mm)
Rotary Clearance: 82" (2,082.8 mm)
|
|
|
|
