|
|
|
|
|
|
Gullco stationary electrode ovens provide efficient dry storage for electrodes and wire reels. The six sizes are scaled to meet the needs of any shop. (10lbs.– 1000lbs)
Gullco portable electrode ovens are ideal for shop or field use. six models are available to suit any requirement. All are light weight, durable, and easily carried to the welding site. They are insulated for accurate temperature control and efficient operation. Each welder can carry only the electrodes required for the job. All models are equipped with rod lifters to simplify loading and unloading of electrodes. The Dry-Pak® is a tightly sealed thermal container which holds oven conditioned electrodes below AWS or ASME moisture levels for more than twenty- four hours. It does not require electricity! The other portable ovens operate on 115 or 230 volt power. Choose one model or an assortment of models to suit a job or shift length.
- Eliminate the risk of costly rework and rejects
- Ensure consistent physical properties and X-ray quality welds
- Protect Low Hydrogen quality in electrodes and flux core wire
- Protect coatings on Aluminum, Bronze, Cast Iron, Stainless and other
electrodes
- Prevent electrode wastage
|
|
|
Industrial drying ovens of drying of 100°c with 500°c. A whole standard range of 20 liters to 2000 liters.
|
|
Type YOU 60/60
With a good capacity of filling, it occupies little place and has a performance higher than the classical devices of laboratory.
They are the great advantages of YOU 60/60.
Short durations of heating, briefs drying cycles via a guidance of optimal air and a renewal of important air as well as a remarkable homogeneity of the temperature in all useful volume, represent only some of the characteristics of this apparatus.
Useful volume: 216 liters
Range of temperature: 200°C
Guidance of the air: vertical or horizontal (TUH)
|
|
The VFT 60/90 is an explosion-proof drying oven of drying. The apparatus is heated with electricity its principle rests on the principle of the forced fresh air. From reduced dimensions of its obstruction outside, it not only is very well adapted for the production, but also for work of laboratory. The advantages the such almost unlimited capacity of combustible material filling and, the aptitude for solvents of the classes of temperature T1, T2, T3, T4 belonging to the groups of explosion IIA and IIB as well as the remarkable homogeneity of the temperature in all useful volume represent some points among others which make it interesting.
|
|
Type YOU 60/60
With a good capacity of filling, it occupies little place and has a performance higher than the classical devices of laboratory.
They are the great advantages of YOU 60/60.
Short durations of heating, briefs drying cycles via a guidance of optimal air and a renewal of important air as well as a remarkable homogeneity of the temperature in all useful volume, represent only some of the characteristics of this apparatus.
Useful volume: 216 liters
Range of temperature: 200°C
Guidance of the air: vertical or horizontal (TUH)
Range VTU
The drying ovens with pulsated air are available in 7 volumes with rich equipment and have a broad choice of accessories.
Trays, grids, plates.
Carriage of loading.
Filter fresh air.
Carry to port-hole.
Etc...
Useful volume: 200 - 8000 liters
Range of temperature: 250°C, 300°C and 350°C
Guidance of the air: horizontal
|
|
GBC FE oven for welding electrodes drying & storage.
Temperature range from 0° C to 400° C, with completely automatic programmable drying or heating cycles, power from 1700 W to 6000 W.
Load capacity up to 300 Kg.
High insulation and safety grade guaranteed by door latch avoiding any accidental door opening while temperature is in danger range for operator.
Supplied with internal separate shelves for accommodation of different welding electrodes size and compound.
|
|
Where autoclave curing is not required, Aeroform have perfected their precision temperature oven technology in conjunction with the control systems developed for the autoclaves, providing gas and electric ovens of unparalleled performance, to any size with temperature ranges currently up to 600°C
|
|
Laboratory-vacuum drying cabinet with safety hood and glove box connection for Laboratory-vacuum drying cabinetgentle drying of active substances:
* CIP-compatible
* Gap-free interior construction
* Halarized product trays
* Drip-free thermal oil supply
* Conductive transport rollers suitable for pharmaceutical applications
* Completely bonded insulation and welded chassis
* Doors can be hinged on left or right sides
* Special pivot arm for opening door in glove box mode
* Inflating seal on safety hood and glove box
|
|
drying oven
Standard configuration with internal chamber, supporting frame and external cabinet made of S. S. AISI 304 (upon request, the internal chamber can be made of S. S. AISI 316).
Drying temperature up to 100°C, with tolerance lower than +/- 3°C on the fixed set-point.
Heating by means of electric heaters or steam battery
Group of electric heaters with variable current intensity for easy internal temperature control
Filters on the external air intake for wet air ejection with filtration degree ASHRAE 85% DOP.
Sturdy loading footplate with stainless steel tilting chute for introduction of trolleys
Stainless steel trolleys and trays for product loading
Scotch-brite finishing.
|
|
Universal drying ovens LHT with stainless stell housing. Options: Tmax: 300°C, air circulation, glass door available (Tmax. only 220°C), program controller.
Vacuum Ovens LHT Vac. Tmax. 200°C. Vacuum min. 2mbar, partial pressure control 10-1100 mbar. Separately heated trays with temperature control. Electronic temperature and pressure control with display. Option: different pumps, underframe with vaccum pump, additiional trays
|
|
|
|
|
|
AUREL A206 Dryer/Curing Oven system
Description
The AUREL A206 dryer system is special designed for predrying of pastes in thick film technology.
Applications
• IR Drying of Thick Film pastes
• IR Curing of adhesives and polimeric pastes
Prior to being submitted to be firing process, substrates with screened-on inks/pastes must be predryed to evaporate the solvents.
Infrared heat is the only heating method available by which thick film pastes can be properly dryed with optimum results.
This is because infrared heat waves penetrate the material and dry the inside of the material first, then dry outwardly to the surface.
Convenction heat causes the outside of the paste to dry first forming a film through which it is difficult for the solvent within to pass.
The solvents actually become partially trapped and as they eventally are released cause cracks in the surface of the material.
Consequently the surface is irregular, resulting in reduced conductivity or inconsistent resistivity.
The new model A206 predrying oven was designed to prevent the problems outlined.
It's design criteria are based on extensive experience in thick film technology, to provide the user with a machine that assures optimum results.
|
|
Fast drying of ceramic grinding wheels on metal racks. Loading and unloading by lifting truck.
MKT 30 1600/2500/5200
Special ventilation system for even drying, roller curtain door.
Microwave power: 30 kW
Useful chamber dimensions: 1200 x 2000 x 4700 mm (w x h x l)
Number of magnetrons: 38 with 800 W each
Product-ID: 72
|
|
|
On principle, varnish chamber dryers differ from ovens without solvent evaporation through the monitoring equipment and exhaust fan installed for this purpose.
|
|
Monoblock Oven
* Up to 350 °C (662 °F)
* Standard line starting at 1 m3 (35.31 ft3)
* All applications: (drying, dehydration, baking, polymerisation of products with flammable substance, liquid and powder painting)
* Electronics controlled by a PLC
* Static relays or thyristor-controlled power controller
* Powered by electricity, gas, heat exchanger...
|
|
DRYING OVENS
EMME GROUP designs and builds ovens for this sector using unique systems which make them completely safe, simple to use, with close monitoring of the temperature in use, higher uniformity of heat spread and energy saving ability compared to other ovens on the market.
These ovens are used for:
* Aluminium treatment
* Treating surfaces
* Thermal treatement of metal, plastics and silicone materials
* Drying
* Drying varnishes
* Drying leather
* Silk-screen
* Heating systems
Our technical office can design and produce ovens according to the client’s specific needs.
Experience, professionalism and a good post-sales assistance including technical assistance guarantee the top quality of our products which are all certified and in keeping with current laws and regulations.
|
|
MINI OVEN “JOLLY”
This dryer is designed for the fast drying of serigraphic dissolvent ink or water ink on various applications. Easy operation and maintenance and high drying efficiency are the main characteristics of this machine.
Endowed of kappa for aspiring attack, mounted on 4
Self-locking wheels.
Dimensions: tape length 150 cm, Height from earth 80 cm, Weight 87 kg.
|
|
Manually operated furnaces, where the product is layered on trays.
The product is then loaded by the operator via a single door or double doors. After filling the furnace and closing the doors, the operator can set the variable temperature controller and start the furnace.
Typically used in low baking of painted surfaces of small batch sizes away from the main production line.
Working temperatures depend on customer’s requests.
|
|
ANCILLARY EQUIPMENT FOR EXTRUSION LINES
- PREHEATING OVEN -
Type FR1
Preheating oven; complete with temperature control
- total installed power kw 8 - total lenght mm 1000.
|
|
Sludge Drying
Sludge from paper making and de-inking processes can be efficiently used as a fuel in the energy system of the paper mill if properly dried to improve the energy content. Allied offers complete sludge drying process with rotary dryers and wet precipitators with engineering, supply and installation services
|
|
Dryer desiccator cabinet KW.86/AV Series.
Internal chamber and shelves are in stainless steel; external cabinet in brushed AISI 0 stainless steel sheet and equipped with split opening door with sealing. Heating is achieved with specific air heaters; discharge of steam inside the chamber occurs by means of centrifugal electroaspirator with 0 m³/h flow rate.
The electrical system is provided with general switch and running light signal. Thermal stability is obtained through PID digital electronic μP regulator (with RTD Pt100 OHM input); it is paired with specific SSR, suited to absorbing load of heaters. In addition, each appliance is equipped with aerators and adjustable supports for shelving.
|
|
Vacuum drying cabinets serve for basic drying of temperature-sensitive concentrates and pasty mixtures of solid substances as well as granulates.
The properties of the dry product depend on the quantity of liquid they contain and the operating parameters which can be set on the equipment.
vacuum drying cabinetThe desired requirements can be controlled and adapted to the greatest extent with the drying process.
In comparison to other types of driers, vacuum drying cabinets offer optimum possibilities for influencing the drying characteristics.
|
|
| ... products without technical information |
| |
|
|
