|
|
|
DRY PLAST 3000 is the most versatile drier of its category. In fact it can be easily positioned on the original press hopper, or it can be combined with a silo to increase its drying capacity. It has a heating capacity of 2500 W and is suitable for drying small-medium quantities of material. The IAD 3000 heating unit is designed to be combined with the isolated hopper to be installed directly on the transformer machine.
|
|
EH-A SERIES
HOT AIR DRYING
The EH-series hot air dryers have been expressly designed for the treatment of non-higroscopic thermoplastic materials in granulate form. The temperature can be adjusted electronically. The possibility for separate control makes these dryers particularly useful. The special “piggy-back” design makes for a very compact machine. The low voltage electrical system permits compliance with CE standards. The units can be installed in the machine or alongside. 12 different models of power generator and 19 di ferent hopper sizes provide a response to every drying need
|
|
|
|
|
|
DRYMAX D30, D60 and 100 Compact Dry Air Dryers
The DRYMAX Series dry air dryers are equipped with two desiccant beds to supply continuous
dry process air and constant quality for the perfect drying of plastic resin.
- Ambient Independent Dew Point to -60°C
- Motorized Switchover Valve – Operation without compressed air lines and optimized control of drying and regeneration cycles in both desiccant beds.
- Energy Saving Counter Airflow Regeneration – Reduced energy costs through fastest dehumidification of the desiccant beds during the regeneration phase.
- Material Protection Function – Avoids over-drying and thermal degradation of the plastic resin through short term lowering of the drying temperature during the production stoppages of the processing machine.
– Micro Particle Filter in Return Air – Dust separation efficiency of up to 99.9% for high process safety.
- SmartReg Energy Saving Function – For the time optimized control of regeneration and cooling of the desiccant beds (on DRYMAX D60 and 100).
- SmartFlow Intelligent Air Distribution – Automatic air distribution to adjust to different materials and fluctuating material demands (available on units with 2 drying hoppers).
|
|
|
|
|
|
In the field of drying, Piovan has developed the application of an innovative technology: the use of a rotor with a honeycomb structure to eliminate the humidity released by plastic material during the drying process.
This brand-new series, presented for the first time at the K2007 show, consists of four models that operate in a temperature range from 80 to 150°C, with air flows from 50 to 200 m³/h: HR50, HR100, HR150 and HR200.
The new HR dryers present numerous advantages such as:
• No expense for the connection of cooling water or compressed air and no running costs for such services because the HR units require only electric power supply;
• 50% reduction of the use of energy;
• Stable Dew Point, featuring set-up values in a range down to -50°C;
• Easy access to all machine components allowing Simplified maintenance
• Guaranteed absence of dust and of material contamination, making the HR dryers suitable for application in the medical and optical sectors too;
• Continuity of operation of the honeycomb rotor ensured by the new drive mechanism furnished with a wear-resistant Kevlar reinforced belt which eliminates traditional maintenance operations or lubrication, necessary when using rudimental belts or chains.
|
|
|
The dehumidication of small and average-sized quantities of polymers may be perfectly carried out with the DD 30 and DD 60 series dehumidifiers. Although these machines have only one silicate cartridge, if the plant is correctly dimensioned, it is possible to easily reach DEW POINT even at 40°C. The temperature control of the dehumidification process is assured by microprocessor system, with a visualization on the panel of the operations carried out and alarms in progress. Silicate regeneration is entirely automatic, the cycle times being personalized by the manufacturer for each machine with the hopper capacity with which it has been fitted, thereby obtaining the maximum efficiency with the least energy expenditure. The original graphics of the control panel facilitate the operator in setting the optimum process temperature, also indicating the minimum stay time in order to obtain a good dehumidification of each material.
|
|
Continuous hot air dryer CD25-600
Hot air dryer for removing surface moisture and condensation from non-hygroscopic materials. Designed for mounting directly on the processing machine and available with hopper sizes from 25 to 600 litres. Can also serve as a floor-mounted drying system in combination with drying hoppers from 30-4000 litres.
|
|
|
|
|
|
Desiccant Dryer Mobile
The Desiccant Dryer Mobile DDM is a dry air dryer designed for continuous drying of free-flowing granular plastic material.
The DDM is a mobile unit which can be located next to the processing machine to supply dried raw material to the processing machine.
DDM 60-IV, DDM 120-IV, DDM 180-IV
Capacity volume: 60, 120, 180 litres.
The standard DDM unit is equipped with an automatic dry air material conveying system for one processing machine. The DDM is also available with a conveying system for two processing machines.
The DDM dryer has been designed for drying hygroscopic raw materials, non-hygroscopic raw materials and regrind in the temperature range from 60° to 140°C with a temperature deviation of ±2°C.
The DDM is also available in an HT/LT design for temperature ranges from 50° to 180°C (high/low temperature).
Owing to an accurate temperature control and a dew point temperature of better than ÷30°C a residual humidity of less than 0.02% can be obtained (for HT/LT 0.002%).
|
|
SOMOS®
- The product line for energy-saving and environmentally-friendly drying
Drying of all hygroscopic plastic pellets
Drying air in a closed circuit
Consistently-low dew point
Regulation of the dry air volume dependent of throughput
Demand-driven regeneration of desiccant
Drying hoppers with low thermal gradient
Continuous measurement of the humidity of the material to be dried
Consistent drying results, regardless of atmospheric conditions
Drying units, Modular drying and Drying systems
|
|
Spiroflux manufactures and markets its own products in the fields of drying and the desiccation.
With the range of drier TSX, we chose technologies of quality: stainless hopper, insulates double skin, regulator PID... etc
The heating elements and the temperature probes are manufactured by our head office VULCANIC.
Generators of dry air DSX
are the subject of a Spiroflux patent by their original principle of production of air and regeneration uninterrupted.
|
|
| ... products without technical information |
| |
Flush Grid Belts
Material: Polypropylene
General purpose belt; low coefficient of friction for accumulation applications; economical
Material: Proprietary High Temperature Composite
Composite material designed for part temperatures up to 392°F
Material: Polyethylene
Ideal for cold applications or those requiring superior chemical resistance
Material: Antimicrobial Polyethylene
Cold application belt with antimicrobial additive
|
|
|
|
|
|
Plastic Top Chain
Top plates and chain parts are made of engineering plastic and are connected using engineering plastic or stainless steel pins. Plastic top chains are used mainly in the food processing, beverage, dairy, and packaging industries.
RS Plastic Chain
The small pitch of RS plastic chain allows smaller diameter sprockets to be used, reducing the dead space between conveyors and ensuring smooth transfer of conveyed goods from one conveyor to another. The main markets for RS plastic chain come from the food processing, packaging, automobile, container, and pharmaceutical industries.
Beltop Chain
Beltop chain uses an alternating combination of interconnected modular engineering plastic links to transport goods in large quantities on wide, belt-shaped conveyors. Beltop chains are in demand in the corrugated cardboard, automobile, and food and beverage industries to replace conventional types in a variety of conveyor applications.
Also avaliable,
Stainless Steel Top Chain
Stainless steel top chain uses highly corrosion-resistant stainless steel for key components. Stainless steel top chain offers a higher maximum allowable load than standard plastic top chain and is especially suitable for transporting steel components or glass containers via direct mounting.
|
|
EUROBELT® SERIES 30 PERFORATED FLAT TOP, with a 17% of open area, has a completely smooth grille-shaped surface, with small openings completely straight and without obstacles, having the following dimensions in millimetres: [2 x 5] and [2 x 8].
This is the suitable belt for applications in which a drainage through the belt is needed and the product to be transported is small.
|
|
Advantages of uni modular plastic belt:
- Easy to clean, Single Link™ no brick lay
- Strong and thick product supports allow more load without breakage
- Quick and easy assembly/disassembly with the new Lockpin
- High tensile strength with reinforced side flexing belts
- Easy to clean Roller Top belt for crate/box accumulation
- More load/longer conveyors with unique sprocket engagement
- ED.A. approved materials and U.S.D.A. accepted products
|
|
EUROBELT® SERIES 20 FLAT TOP, thanks to its closed surface, is the suitable belt for all those applications in which it is not necessary any drainage through the belt and / or the product to be transported is small so that it could get caught on the holes of a belt with some open area.
Its completely flat surface avoids the falls of product and the resulting blockage of the line.
|
|
Rexnord® TableTop® Chains
Engineered to satisfy a wide range of conveyor applications for virtually any industry
Straight running and side-flexing chains
Chains formed from metal or molded from thermoplastic for high strength and speed
Narrow widths are ideal for multiple strand and variable speed conveyors
Chains with low backline pressure rollers minimize product damage
Several chain series couple traditional top plates with roller base chain for increased strength and precision
Rexnord® MatTop® Chains
Continuous conveying surface for applications demanding greater width requirements
Available in both assembled-towidth and molded-to-width configurations
Pins extend the full width of the chain ensuring maximum strength
Provides smoother conveying surfaces
Smaller pitch chains available to minimize the size of dead plates
Engineered to satisfy a wide range of conveyor applications for virtually any product size
|
|
| ... products without technical information |
| |
|
|