|
|
The Conventional Spray Dryer in the co-current mode, standard, non-agglomerated fine to medium coarse powders can be produced. In the fountain nozzle mixed flow mode a free-flowing, coarser product can be obtained.
|
|
|
Spray drying systems for the production of powders for the food , pharmaceutical and chemical industry. Installations are available with rotary disk and nozzle spraying technology ( for drying in co-current and counter-current ) and can include powder stabilization and cooling systems by fluidizing-bed or pneumatic transport with conditioned air. Surfaces in contact with the product can be , depending on the needs, stainless steel AISI 304, AISI 316 or special alloy. Air heating equipments depend on the processed product and can be indirect, direct or electric single or dual stages. Safety devices necessary to handle the various kind of product are included.
|
|
| ... products without technical information |
| |
Corrosion Test Apparatus for Salt Spray Tests, Model 606
For tests in accordance with all salt spray standards. Corrosion resisting test chamber with circular dome or rectangular chamber, of plastic construction. Special dimensions upon request. Operator friendly controls for up to 2 test chambers with volumes of 400 l, 1000 l and /or 2000 l.
|
|
Alternatively to our salt spray tests bench top cabinets and HD-chest models we offer the most favourable "ECONOMY" chests with 600L and 1000 L chamber capacity. These models are especially designed pursuant to the requirements of salt spray tests according to ASTM B117, ASTM B368, BS 3900 ECCA T8 JIS 7253 DIN 50021 SS, ESS,CASS resp. ISO 9227.
The side- and front walls are made from polypropylene. Following the VLM prinicles the EC-chest model are as well furnished with a ECTFE coated stainless steel bottom. Compared to conventinal chests the EC-chambers show a considerably better heat conductivity. For this reason the chamber will be heated up evenly and rapidly. Moreover due to this benefit, EC-chests can also be used for high humidity tests with constant water condensation pursuant to ISO 6270-2 CH.
The EC-cabinets are furnished with a transparent cover with turnable locks at both sides with a "dry" seal made of silicon foam. Hence, there is not only a convenient cleaning or loading of the chamber with the specimens. More important: As the chamber is hermetically closed during the tests there is no risk of contamination of the lab by escaping salt mist. An air purge is a serial feature and has to be activated before the cover is opened.
|
|
Salt spray alternate climates Standard SC
For tests reproducible of corrosion, in conformity
with the national standards and international, such as DIN, NF, ISO, ASTM, DEF, MIL-STD, etc .....
|
|
Air and Fluid Tubing - Nylon:
PLH-NP-2 Tubing and Connections, Air and Fluid
PLH-NP-4 Tubing and Connections, Air and Fluid
Air Tubing - Polyethylene:
H-2338 Tubing and Connections, Air
H-2339 Tubing and Connections, Air
Nylon Tubing Connections:
PLH-1438-SS Stainless Steel Connections
PLH-1414-SS Stainless Steel Connections
PLH-1838-SS Stainless Steel Connections
PLH-1438-SG-SS Stainless Steel Spring Guard Connections
PLH-1414-SG-SS Stainless Steel Spring Guard Connections
Polyethylene Tubing Connections:
P-HC-4216 Connections for Tubing
HC-4615 Connections for Tubing
P-HC-4221 Connections for Tubing
P-HC-4728 Connections for Tubing
P-HC-4215 Connections for Tubing
Fluid Quick Detachable Connectors:
P-HC-4808-1 Fluid Quick Detachable Connectors
HC-513-1 Fluid Quick Detachable Connectors
QDL-4808 Fluid Quick Detachable Connectors
|
|
Goodyear offers a range of premium quality spray hoses suitable for a variety of applications.
Visit our website below for a complete list of the hoses available
|
|
Goodyear offers a range of premium quality spray hoses suitable for a variety of applications.
Visit our website below for a complete list of the hoses available
|
|
... see all the products in the category
Hoses
|
When the particle of painting is deposited in the pocket of retention, it is in a "cul-de-sac" apart from the flow of air, it cannot thus migrate more through the filter.
During the use of a filter "ANDREAEriLTERS", the passages of the air remain free although the filter fills of painting. The filters "ANDREAEFlLTERS" will be clogged only when the pockets of retention are entirely filled with painting. In the case of a sieve filter, painting settles between the meshs and quickly will stop the filter. This one will thus not be in-depth load.
Air velocity recommended: 0,5 m/s with 1 m/s
Depression with: 0,5 m/s 13pa, 0,75 m/s 30 Pa, 1 m/s 56 Pa
Recommended maximum depression: 1 30 Pa (possible up to 250 Pa)
Load capacity to 0,75 m/s and 130pa: up to 18 Kg/m2
Effectiveness of filtration to 0,75 m/s (modilfié test ASHRAE): 91% to 98,1%
|
|
| ... products without technical information |
| |
AutoJet Technologies is the turnkey systems division of Spraying Systems Co., the world's leading manufacturer of high-quality spray nozzles. Using patented SprayLogic(R) software, top quality spray products and unsurpassed technical expertise, our engineered systems accurately monitor and control spray applications.
|
|
| ... products without technical information |
| |
Dry, robust sand blast cleaning room and compacts, with standard projection "overpressure", with dust extractor with integrated cartouche.
It offers a total volume thanks to its frontal opening opening on a scheme of work or in option on a revolving plate.
Useful volume: 1300 X 750 X 850 mm
It is the best report/ratio ecombrement total/useful volume of the market.
|
|
Machine of projection of abrasives with wet process.
The water mixture + abrasive projected on the parts allows very soft treatments on fragile parts and associates the creation of surface quality with degreasing and cleaning.
|
|
The JetSpray humidifier combines compressed air and water to produce fine sprays of moisture that immediately evaporate to raise the humidity to the desired level.
It can be fitted inside an AHU or duct, or directly in the space to be humidified.
The system requires very little energy to operate, has the lowest compressed air consumption of any similar system in the world and due to its self-cleaning nozzles requires very little maintenance.
|
|
The Condair Fast Fog high-pressure humidifiers are applied for the humidification of supply - and re-circulated air in industrial, commercial and public buildings. Due to the high humidification efficiency the Condair Fast Fog is also used for adiabatic cooling of exhaust air in air conditioning systems.
|
|
| ... products without technical information |
| |
The transition of a melt from a soft or fluid state to a rigid or solid state by cooling is called congealing. The various droplet formation techniques and the efficient droplet / air contact make the spray drying concept ideal for making spherical particle powder by congealing of melts.
|
|
PIPE JOINTS, SWIVEL JOINTS & QUICK COUPLING JOINTS
Metal swivel joints to suit any need for your spraying systems, and modern quick coupling joints made out of high technology plastic materials.
|
|
Pharmaceutical and chemical companies use the the new SDMICRO Spray Dryer to evaluate spray drying during the early stages of product development. Companies can identify the most appropriate isolation technique for the product to guarantee the most efficient manufacturing process.
|
|
The Allgaier method is characterised by its high stability with respect to variations of the solid concentration in the feed and to variations in the feed capacity. Modern dosing devices permit precise compliance with defined formulas.
The possibility of operating the granulation dryer in a closed circuit with superheated steam or solvent vapour results in a process free of exhaust air which is particularly suitable to the handling of toxic materials or for the treatment of dangerous waste materials.
|
|
|
... see all the products in the category
Grinders
|
3M™ Aerosol Adhesive
Aerosol adhesives offer a wide range of performance and application characteristics. Most 3M aerosol adhesives also have a controlled spray pattern to help minimize overspray, clean up and unused adhesive. These adhesives contain no methylene chloride, chlorofluorocarbons (CFCs), or 1,1,1-trichlorethane (methyl chloroform).
|
|
Aervoe has a complete line of specialty adhesives and an adhesive remover that is perfect for any job.
EPS Foam/Concrete Adhesive - unique pressure sensitive, upside down spray adhesive for extra-strong bonding or laminating of expanded polystyrene (EPS).
Multipurpose Adhesive - provides holding power on most surfaces, rough or smooth.
Hi-Strength Adhesive - ideal for extra-strong bonding of materials to a variety of surfaces.
Contact Adhesive - will permanently affix flexible materials such as laminates, many plastics, metal, and wood. Will not delaminate at temperatures up to 200 degrees Fahrenheit.
Adhesive Remover - ideal for the removal of adhesive residue or as a surface preparation prior to the use of adhesives by cleaning heavy oils, greases, silicones, and grime from the surface.
|
|
| ... products without technical information |
| |
|
Varpe, as self-manufacturer, adapts his equipments to the needs of each client, offering tailor-made solutions that adjust to the lines and to the production processes of your industry.
|
|
|
... see all the products in the category
| |
