|
|
|
The Bergmann compact dumper range offers the complete program for payloads from 700 kg to 8.5 tons. Nearly all applications like gardening and landscape design, cemetry care, inside demolition as well as the classical building construction and civil engineering are covered. Smaller and middle-sized earth moving sites in route transport and off highway are thus rationalised most effectively.
|
|
Unlike many other high discharge dumpers that claim to be narrow access, the HDX is genuinely less than 1 metre wide so it can fit comfortably through standard doorways. This enables access to even the most awkward spaces for loading and unloading. The capabilities of the HDX are further enhanced by its capacity to discharge the skip up to a height of 1.59 metres, allowing you put the load exactly where you want it.
Barford's HDX Series High Discharge dumpers come as both 1000 or 750 kg loading capacities, and have the peace of mind of a full manufacturers warranty.
|
|
|
The Bergmann compact dumper range offers the complete program for payloads from 700 kg to 8.5 tons. Nearly all applications like gardening and landscape design, cemetry care, inside demolition as well as the classical building construction and civil engineering are covered. Smaller and middle-sized earth moving sites in route transport and off highway are thus rationalised most effectively.
|
|
Barford's SXR Rotary Tipping Series of dumpers are built to the same exacting standards as their Forward Tipping stable mates, but benefit from the additional versatility of a skip that can be rotated through 180 degrees for easier loading and unloading. Whatever the job Barford has an SXR Rotary dumper to suit.
The range spans a 3 tonne model through to massive 7 and 8 tonne turbo charged machines and the new SXR3 HiLODA. All SXR machines come with a full manufacturers warranty as standard.
|
|
| ... products without technical information |
| |
|
Heating sleeves to heat segments of 200 litre barrels per DIN. both the inner and the outer sheath of the barrel heating sleeve are made of aluminium sheet, which ensures maximum protection of the electrical components against mechanical damage. A hinge with campling closure that divides the heating surface into two semi shells permits convenient assembly, without the heating element needing to be bent. The barrel can be heated complete by using 3 sleeves.
|
|
DRUM HEATERS - for 200 litre barrels.
Drum Heaters facilitate the handling of solidified or viscous materials like adhesives, waxes, tar, chemicals, oils etc. They eliminate cumbersome methods and high investments, associated with steam and oil or fire wood heating.
Construction
Drum Heaters consist of a cylindrical metal cover carrying the flexible heating elements. A 2" thick thermal lagging of glass wool provides insulation and the metal casing makes for a rugged unit that can be wrapped snugly around the drum. The Drum Heater is hinged, and is mounted on castors for convenience. A base heater, also encapsulated in metal provides bottom heating. Control Panel incorporating thermostatic control is provided with the heaters.
|
|
| ... products without technical information |
| |
Videojet P3400 Label Printer Applicator
The Videojet P3400 label printer applicator is easy to use and maintain, and features the versatility of modular spares to deliver maximum uptime and performance. Available with multiple printer options and a variety of application choices, the Videojet P3400 provides a customizable, off the shelf solution.
Simple, modular design
RFID Enabled
High quality thermal transfer printing
Built to last in the most rugged industrial environments
User configured beacon and status output
Multiple label configuration menu
Flight time compensation for automatic label placement control
Ethernet connectivity for set-up and control
*THIS ITEM IS CURRENTLY AVAILABLE ONLY IN NORTH AMERICA
|
|
* Ij3000 XLS Controller :
The Ij3000 XLS Controller was designed and built to meet any demanding coding application. Diagraph has engineered the XLS Controller to exceed performance expectations. The XLS Controller seamlessly integrates Impulse Jet and Integrated Valve technology offering a networking function that delivers reliable, high quality printing to any automated production enviroment.
* Ij3000 ES Controller :
The Ij3000 ES Controller is a powerful, low-cost web-server based HMI features a color touchscreen display, drives Diagraph’s Integrated Valve or Impulse Jet printheads, and has a 100-base T Ethernet network port for web browser, network connectivity. Diagraph has created special package “Ij3000 ES kits” for dual head Integrated Valve 9 or 18 dot printhead applications and has special introductory offer. Interested parties should call 800-722-1125 for details.
* NEW! IV-18 Dot Printhead for IJ3000 Ink Jet System
Diagraph is pleased to introduce the IV18-Dot Printhead for the Ij3000 Integrated Valve Large Character Ink Jet System. Key Standard Features Include: Two-piece, die-cast aluminum housing, environmentally sealed printhead for harsh environments, robust metal housing over entire printhead, built-in LED display and membrane switch for: -->channel purge (one or all channels) -->electronic pulse width (dot size) adjustment -->pressure gauge, automatic first dot correction, overdrive protection, photocell mounting bracket holes, backwards compatibility with existing Ij3000 and Series 1 printheads. The IV-18 Dot Printhead is driven by Diagraph’s Ij3000 Ink Jet Printing System.
|
|
Unit designed and produced by United Barcode Systems as a real time labels Print & Apply System for two side corner box. Perfect for labelling corner solutions.
Solid system made for industrial environments. Its base height is regulating in order to adapt all kind of production and packaging lines and uses synchronisation and alarm signals.
Its working speeddepends on label size reaching up to 45 labels/minute.The APL-2000 can be connected to any computer system;Windows NT, UNIX, AS/400, PC, etc... and ERP environments.
|
|
Real time labels Print & Apply System for labelling dynamic processes. It has been developed to satisfy awide range of labelling needs in boxes, packs, sets and sacks.Easily adapts when various fields label printing and applicationis needed in half speed situations.
The print and apply kit can be adjusted for perfect applicationsin any direction and position: Top and Sides. Application distance depends on production line characteristics and application placeas well as on the type of pack to be labelled. Its working speeddepends on label size reaching up to 45 labels/minute.
|
|
| ... products without technical information |
| |
L 323 Single head, foot operated
L 323 D Twin heads, foot operated (2 stapling operations simultan.)
Bottom-stapling folding boxes with joining flaps with stapling pillar for bottom stapling empty folding boxes made from solid or corrugated cardboard.
A rapidly adjustable carton guide stop permits precise stapling over the flap joint: L = length stapling.
Complete with finger protecting device. Depending upon the type of cardboard,different large sized staples can be inserted without adjustment: MG® 312, MG® 315, MG® 320, MG® 323 (for solid and corrugated cardboard with single or double flute).
For max. carton sizes: L 100 x W 68 x H 70 cm including one flap.
|
|
RECORD P 323 SP with 4 stapling heads. 2 staples automatically placed longitudinally, 2 (or more) at an angle of 45° exactly over the carton flap joint.
Pneumatic (4 - 6 bars), complete with maintenance unit.
For bottom-stapling large number of empty folding boxes made from solid or corrugated cardboard which have the same size.
The clinching table is adjustable both longitudinally and laterally and ensures firm support and a correct shape of the box.
Adjustable for box sizes of 30 - 50 cm length and 20 - 40 cm width.
Height max 70 cm including 1 flap.
Capacity: 400 - 500 boxes/hour.
Depending upon the type of cardboard, different large sized staples can be inserted without adjustment, for solid and corrugated cardboard with single or double flute.
Complete with finger protecting device.
Stapling is triggered by two-hand-safety control.
|
|
For one-handed operation.The operator has one hand free to shape the carton. Empty cartons can be bottom-stapled. Staple from inside to outside.
TOP staples will be automatically clinched within the corrugated section of the under board without clinching anvils, i.e. no damage to the contents and no additional stitching holes next to the staples.
For staples TOP SP 11 for single corrugated cardboard
For staples TOP SP 18 for double corrugated cardbaoard
Weight 2.4 kg, Loading capacity 120 staples
|
|
This line of slew drive reduction gears, from 500 to 1700 daNm, is ideal for applications on crane trucks, excavators, harbour cranes, and so on.
The main features are the output support in steel and a sturdy pinion integral with the shaft, suitable for any type of thrust bearing.
|
|
|
Gearboxes complete with reinforced output supports, integral pinion, static negative disc brake and input coupling for hydraulic motors; nominal output torques range from 4.100 Nm to 60.000 Nm.
|
|
For applications that require maximum PCI expandability in a compact form factor, Arista offers the MPC 1060. This chassis is custom designed to provide maximum expandability and reliability while maintaining a low profile shoebox. With its split chassis cover design, the top half of the unit can be opened, allowing for maximum internal access. The unit has side mounting flanges for floor mount installations.
+ MPC 1060B INDUSTRIAL SHOEBOX COMPUTER
= 3.0GHz Intel P4
= up to 4GB DDR 400
= 6x Full Size PCI Slots
= 2x RS-232, 1x RS-232/422/485
= 7x USB 2.0 ports
= Dual Gigabit Ethernet
|
|
SIMATIC Box PCs are particularly compact and rugged industrial PC systems for machine engineers, plant engineers, and control cabinet builders. They permit powerful yet space-optimized applications.
Three device classes are available for different requirements:
SIMATIC Microbox PC 427B – ultra-compact and maintenance-free: the flexible embedded industrial PC
SIMATIC Box PC 627B – maximum performance in minimum space / with Intel® Core™ 2 Duo technology
SIMATIC Box PC 827B – maximum performance and flexibility with Intel® Core™ 2 Duo technology
|
|
Embedded Box PCs
Kontrons Box PCs are suitable for machine, cabinet building factory automation, offering scalability in performance, connectivity and size. Kontrons Box PCs fit nearly all applications in industrial environment. When EMC, temperature, Vibration and schock become an issue, Kontrons Box PCs are the right choice.
|
|
|
production of handles for cardboard boxes with polypropylene and cardboard handgrips. available in various colours, they are completely ecological with high values of weight resistance. Patented
|
|
Demag introduces Model DC, a new generation of chain hoists. Precision quality with innovative features for added safety and serviceability.
- Plug in electrical connections
- Diagnostic service data
- Integrated 3 axis motion controls
- CSA approved
- 24 volt pendant control voltage
- Cycle and load spectrum monitoring
- Upper and Lower limit switches
- Slip clutch to prevent overloads
- High safety factor for load chain
- Gearbox lubricated for 10 years
- State of the art controls
- Long life low amp switching
- Easily adjustable pendant height
- Pendant or available with remote control
|
|
| ... products without technical information |
| |
... see all the products in the category
| |
