|
|
|
|
|
|
Micro Air® dust collectors utilize cartridge filtration and are available in a large range of configurations up to 24 cartridge models. All are sized and rated for the proper air-to-cloth ratio to solve a wide variety of applications such as weld smoke, powder dust, grinding dust, paper dust, etc.
Micro Air® dust collectors are designed and manufactured with standard features that set them apart from the competition. These include
Roto-PulseT Cleaning
Provides a much more efficient cleaning cycle for increased air flow and longer cartridge life.
Gravity Flow Design
Dirty air always flows across the filters from top to bottom utilizing the natural downward force of gravity to get the particles to the filtration.
Compact Design
A small footprint of only 42" x 48" allows Micro Air dust collectors to be located in virtually any area.
Easy Maintenance and Installation
All electrical and air connections are outside the cabinet for easy installation and maintenance.
After-Pulse is Standard
Micro Air provides an after-pulse cleaning cycle in addition to automatic on-line cleaning. This allows the unit to pulse the cartridges after power is shut off for an effective cleaning at the end of a shift.
Complete Single-Source System Design
We can design and provide a complete dust control system including the collector and the ductwork to solve your particular problem. This is your assurance of the best possible total system supplied from a single source.
|
|
Effective removal of dust based on long experience.
Removal of dust from production processes is necessary in order to improve the working conditions for the people and machines. The filter is developed on a thoroughly tested filter programme that has stood the test of a variety of conditions in many industries. This results in high cleaning efficiency but requires low space and energy requirement.
Please refer to the cassette filter brochure for more information
|
|
|
The reverse pulse jet line of dust collector filter particulates in the blaster’s stream with ultra high efficiency filter cartridges. The cartridges are automatically cleaned with high pressure pulses of compressed air.
|
|
|
|
|
|
Clyde Materials Handling has developed a wide array of MAC Equipment air/dust filtration technology which can be applied to tackle any process filtration challenge. For more details contact Richard Sims, Managing Director – Industrial Process Technologies on 01302 321313 or visit www.macequipment.co.uk
MAC Pulse Jet filters can be used in a wide variety of air filtration applications. Depending on the configuration, they can be used as the filter in a dust collection system or as the product receiver in a pneumatic conveying system. Filters can also be equipped with a HEPA high efficiency filter on the clean air exhaust where the air is being reintroduced into the work environment. For lower energy consumption, medium pressure cleaning options are also available.
The MAC2Flo has large square footage of media per cartridge allowing for increased air flow with no increase in pressure drop. Dust-laden air enters the top of the filter, which provides a true downward airflow resulting in increased cleaning efficiency.
The MAC Medium-Pressure Controlled-Cleaning Dust Filter (MCF) is the most efficient and versatile bag filter made. Capacities range to over 250,000 CFM with over a dozen filter media options available. MCF Dust Filter combines superior consistent cleaning performance with major energy savings. Each round filter bag is cleaned only once per cycle to optimize bag life and pressure drop.
A full range of replacement filter bags in a variety of medium, cages and filter cartridges can be supplied.
Components are sold as stand-alone units. Some of these components are also used in Pneumatic Conveying systems to filter process dust from the air stream.
|
|
» Ideal for use as product receivers
» No moving parts
» No replaceable filters
» May be used as precleaners to fabric type collectors, or as independant collectors for coarse dusts
» Stainless steel and high temperature options available
» Highest filtration efficiencies in this product class
» Suitable for high temperature applications and extremely high dust concentrations
» Multiple cone design handles airflow capacities of 500 - 60,000 cfm
|
|
ART Series
POLLUTANTS: DRY DUST
AIRFLOW RATE: 700 ÷ 3800 m3/h
Suitable for suction and purification of dust produced during dry machining processes.
Especially suited for graphite machining processes.
Special polypropylene pockets retain the suctioned dust on the external surface.
The filtration efficiency is maintained constant by means of a manual cleaning system, through a mechanical shaker. On request, the latter can be installed with a pneumatic control.
The dust is collected in a suitable box easily removable.
The unit is also available with a hopper, which conveys the dust into a bag for its disposal.
|
|
Capture Dust From All Types of Blasting:
* Wheel blasters
* Air blasters
* Cabinet blasters
* Blasting rooms
* Sandblasting
* Plastic media blasting
* Abrasive blasting
Special considerations for:
* Aluminum blasting
* Blasting with silica sand
Gold Series® Dust Collectors on Blasting Applications
Blasting is a very diverse market made up of wheel blasters, air blasters, and cabinet blasters. The blasting media also varies widely from sand, steel, plastic, slag and various shot. This section focuses on wheel blasting and large blast rooms. Farr APC has over 100 Gold Series on these applications and numerous Tenkays.
|
|
These types of dust removers are suitable for the intake of dust created during the sandblasting works, for the treatment of small and big tanks, cisterns, double bottoms and basements.
The main characteristic of these plants consists of small dimension, so that they are transportable on standard means of transport..
Dry dust remover is a type with self cleaning cartridges, by injecting jets of compressed air.
|
|
AR 1148 Series
POLLUTANTS: DUST - MICRODUST - SMOKE
AIRFLOW RATE: 2600 ÷ 4500 m3/h
Suitable for suction and purification of dust, microdust and smoke produced during dry machining processes.
Suited for purifying particles of different granulometry, simply using interchangeable filters with different degrees of filtration efficiency.
This series is equipped with a High Efficiency HEPA Filter.
This unit can be connected to more than one machine tool simultaneously, depending on the airflow rate of each machine.
|
|
» May be used as precleaners to fabric type collectors, or as independant collectors for coarse dusts
» Ideal for use as product receivers
» No moving parts
» No replaceable filters
» Stainless steel and high temperature options available
» Highest filtration efficiencies in this product class
» Suitable for high temperature applications and extremely high dust concentrations
» Multiple cone design handles airflow capacities of 500 - 60,000 cfm
|
|
Thanks to new compact unit DELTAFLEX the user and the operator can choose their air flow and the size of the unit.
The ventilator can be positioned on the dust extractor or with the feet of the dust extractor.
All our equipment is in conformity with directive ATEX 94/9 EC
The access since the front of the apparatus facilitates the maintenance actions and unit profiles low it are the result of our service of design which is concerned with our customers and users.
The elements DELTA and DELTA ² can be installed horizontally in one or two levels, according to the air flow.
|
|
|
|
|
|
Filter elements DELTA and DELTA ²
Our series of filter elements DELTA will be able to convince you by its results. It fills as of today the environmental requirements of tomorrow. The body of the filter element DELTA is out of sintered polyethylene. The surface of the filter is made up of a layer of PTFE microporous and hydrophobic subject which is firmly anchored in the filter housing.
Notable characteristics of our elements DELTA:
- possible lifespan of the filters up to 15 years
- Maintenance costs reduced thanks to this high lifespan
- Constant Flow thanks to a constant pressure loss
- Rates of filtration thanks to a filtration of surface Excel
- Rejection Rate ≤ with 1,0 mg/m
- Robust Filter thanks to a body of compact filter
- Filter Media: washable, which can be recycled, regenerable
- Universal Assembly on the side of the clean air or the dirty air
- Horizontal and vertical Assembly possible
- Media completely free from fiber, ideal for a recycling of the product
- Particularly adapted for very abrasive dust
- Anti-static Version
- Conformity FDA thanks to the food use of materials
|
|
|
The filtration units series DCS are destined to the systems of aspiration and discouragement of all those powders derived from the processes of surface treatment that need of a captazione and a transport to high speed. The exclusive right and patented Cycloseparator technology and the application of cartridge filters in woven polyester "long-life" are constant guarantee of highest efficiencies of filtration and performances in the time. Thanks to the part electrical worker of commando and endowed control of PLC a advanced management of the functionalities so as to at best satisfy the requirements of the system is possible, adapting the energetic consumption according to the demanded effective of aspiration from the operating ones. Available Atex version (Version "RX") in compliance with Directive II3D T150°C
|
|
|
In industry, explosive organic dust is aspired. The units of de-dusting, in accordance with the new règlemnetations must be equipped with protective systems of rather expensive explosion. PharmEx is conceived so as to be able to treat the organic poussères having a maximum explosive pressure Pmax 10 bars and Kst of 250 barm/s. Of reinforced construction, it required not anti-explosion constructive protection.
|
|
Since the early 1980s WAM® have developed a unique range of compact Dust Collectors that meets the requirements of every user.
Today WAM® offers a comprehensive Dust Collector range for de-dusting and dust control for virtually all industrial applications.
|
|
|
|
|
|
DM Series – Shaker Bag Dust and Dust/Fume/Smoke Systems
AER Borne Environmental Systems DM Series modular dust Collection systems are designed to provide efficient, cost effective control of dust, fume, smoke and gas/vapor contaminants generated from a variety of manufacturing and process applications. Standard units are designed for floor or machine mounting with other options available (consult factory). Optional hopper kits are available for additional dust storage capacity with standard 5 or 55 gallon drums. Units are also available in portable models and in a small downdraft table option. A full line of accessories and options are available to simplify unit installation.
As with our other collection systems, the DM Series modular design provides the ultimate in unit filtration flexibility or adaptability enabling them to handle a variety of airborne contaminants. Modular design allows for simple integration of additional filter modules allowing the collectors filter stages to be easily customized to meet the exact filtration requirements of the application. Should contaminants change due to process changes, filter modules can be easily added and/or existing ones altered to adapt to the changing conditions.
|
|
|
|
|
|
Shaker Collectors
If your application permits intermittent operation, consider a Sly Shaker collector, which is simple to operate and maintain. Filtering velocities are low, which provides uniform dust distribution and long bag life. Accumulated dust is intermittently shaken off filters while air flow is temporarily interrupted. Capacities to 4000 CFM.
The Pactecon Model S is an economical baghouse design engineered specifically for dust collection applications where it is practical to shutdown the process periodically for filter cleaning. A shaker device effectively breaks the dust cake and cleans the bags. Dust collection filters are shipped with a hand operated shaking device or optional motorized shaker. Solid state timers for control of the shake cycle are available as options. Using either method, it is recommended that the entire filter bank be shaken for 1 or 2 minutes at 4 to 8 hour intervals.
Highlights
- For non-continuous use
- Low initial cost, low operating cost
- Compact
- Maximum efficiencies
- Up to 4,000 CFM, temperatures to 275°F
|
|
Auto M shaker filter
The Auto M Z-Series is the latest generation of robust simple mechanically cleaned dust collectors suitable for non-continuous duty for industrial, commercial and educational locations.
Key features
• Neat, compact, unobtrusive, easy to clean exterior
• Robust weatherproof welded steel construction
• Electric shake cleaning, perfected by 30 years' experience
• No need for compressed air
• ATEX certified Baseefa 03 ATEX0225 for explosive dusts
• Simple maintenance, access from clean air side
• Many options including secondary filters to increase versatility.
Typical applications
• Metalwork, grinding, fettling, sanding, polishing
• Woodwork, dust extraction from small and medium workshops
• Bulk powders, chemicals, sack tipping, weighing, bagging
• Educational workshops – ceramics, metal work, crafts, woodwork,
|
|
|
The BDC Series of dust collectors are ideal for industrial processes such as bin venting and raw material handling. Compact in size, this baghouse-style system can be installed inside or outside; while minimizing the occupation of valuable floor space and offers easy access for filter maintenance.
|
|
FT40SV
40 Cotton Sateen Filter Tubes.
Filtering Area 400 sq. ft.
Shipping wt. 906lbs
AGET silo vents are installed directly on the silo or bin, where collected dust trapped in the filters falls back into the bin when the tubes are shaken. Dust-laden air created by loading of the silo is filtered and exits from a weather protected bird-proof outlet. Motorized filter shakers less controls are standard. Exhausters can be included (see below) to relieve system back pressure and create a negative pressure in the bin. See "Pull-Through" filters for specs. Larger models and optional filter fabrics are available.
|
|
|
The L-CUT series has been specially developed for the collection of dust and fumes caused by thermal processes such as joining, separating, or surface treatment by laser, plasma or gases, to separate the finest of metal oxide particles. These units are compact and have a very low profile. Therefore, they can be installed in tight spaces. The spark pre-separator KSE is already integrated in the housing.
|
|
|
|
|
|
The W&S Series require that users enter through a side access door in order to change the filter mediums inside the dust collector. It is Airex’s first generation of baghouse collectors.
The dry fabric filter is by far the most efficient and the most reliable compared to numerous other air pollution control devices. Unlike other filtering methods, variations in dust loading or air volume will not change the outlet conditions of a well-designed dry fabric collector. The pulse jet system outperforms conventional dry fabric filter units since it allows the use of highly efficient felt filter fabrics.
Using top quality needle felt media of appropriate weight and construction enables maximum filtering efficiency to be attained. A full range of natural and synthetic felts is available to meet your specific requirements: Fibreglass, Polyester, Nylon, Nomex, etc. All bags are accessed from the side entry of the collector for servicing.
ADVANTAGES
- Operates at high temperatures (special bags required)
- Maximum filtration can be obtained through selection of certain items that include bag types, can velocity, collector shape and arrangement.
- Steel internal cage supports are used to keep the bag form.
- No tools are required to remove the bags.
- Quick-clamps hold the bags in place
- Standard cages and bags are easily available on the market
- Large loading capacity
- Easily pulse cleans sticky and stringy materials
- Resists chemical products
- Resists humidity
- Stable pressure differential
- Energy recovery
- Maximum efficiency
- Adjustable pulse jet cycle
- Side access
- Can operate at High temperatures up to 800˚F (special bags required)
- NFPA Construction
|
|
This filter unit has been designed for special dust filtration in the lacquering, composite material and fibreglass-reinforced plastic machining industries. The components used in this unit ensure high filtering capacity to comply with the strictest air filtration on the workplace standards.
Maintenance requirements are reduced to a minimum thanks to filter cleaning controlled by a special control unit, which preserves the machine filtering power by checking in real time the pressure difference upstream and downstream from the filters. Cleaning is carried out via a counter-flow compressed air jet amplified by the action of a Venturi cone. Using this electronic control unit reduces the compressed air requirements to a minimum, as cleaning is only carried out when the filters are actually in need of cleaning. The only required opera
|
|
|
|
|
|
Heavy-Duty Dust Collection
The continuous duty bag dust collector for those applications where cartridges will not work. The Bagtron comes in a full range of sizes, from 67 sq. ft. to 1750 sq. ft. of filter, thus giving CFM's of air moved from as low as 500 CFM and as high as 25,000 CFM. In addition custom / larger sizes are available.
Self Cleaning While Running
Online cleaning is accomplished by a solid state control board which sequentially energenizes solenoids, allowing diaphragm valves to dump compressed air from the storage header into the blow-down pipe. The blow-down pipes have orifices over the inlets of each bag. The primary air is then joined by secondary air in the clean chamber both to flex the bag, cracking the dust cake, and also to blow off the loosened dust. The large agglomerated dust particles will then fall to the hopper for discarge from the collector. The compressed air jet is processed through a Venturi before passing to the fabric of the bag.
Specifications
- 14 Gauge with ribs
- Magnehelic gauge
- 16 oz. singed polyester felt
- Internal Venturi
- Galvanized bag cages
- Nitro blue enamel
- 4.75" Dia bags - 6, 8, or 10 ft. long
Options
- Direct mounted blower/motor
- Volume control damper
- Fan silencer
- Bin vent design
- Rotary air lock
- Platform & ladder packs
- Explosion vents
- Photohelic gauge
|
|
|
|
|
|
|
The filter type FBI is a filtering unit with a counter current cleaning system employed to separate pulverized solid products, which are suspended in the air or in other gaseous products. The filter is equipped with a tank to accumulate pressurized air and the sleeves' cleaning system, both contained inside the filter body. The cleaning system is controlled and managed by a cyclic electronic timer with a ?P incorporated. The filter is supplied with the work and pause sequences programmed and may be reprogrammed according to the client's requirement. It is also equipped with a three digit display to visualize the inlet differential pressure. The efficiency of the filter type FBI is within the values prescribed by the current anti-pollution italian law (d.P.R. 203/88). Its construction is also in conformity with european directive and italian law (d. Lgs. 277/91) On noise reduction in the working environment. The filter shape is cylindrical with the sleeves' extraction from the top. Its engineering is a result of the research and experience in the dry filtering with the use of sleeves and optimization of space in the plants. The air-product mixture is suctioned in the filter. The heavier product particles drop to the bottom by gravitational force whilst the lighter rise to the top and are filtered by the filtering sleeves wich are supported by steel frames. All filters may be executed in carbon steel, stainless steel Aisi 304 or Aisi 316, and aluminium.
|
|
Compressed air self-cleaning bag filters BAG COMPACT Polluted air enters the filter through a pre-chamber which enables separation of rough particles; the flow then goes through the bags, depositing the contaminant outside, while clean air is discharged from filter head. An electronic sequential cycle provides for bag cleaning by compressed air.
APPLICATIONS
- Dry processing on machine tools
- Chemical processing
- Pharmaceutical processing
- Plastic material processing
- Grinding
- Sandblasting
- Silo breathing
- Marble cutting
- Plasma cutting
|
|
|
|
|
|
The VARIO series is particularly suitable for the separation of fine dust. Nearly all types of dust can be successfully separated, such as those created in metal processing, polymer processing, and in chemical, pharmaceutical and ceramic industries, as well as non-metallic minerals.
The VARIO units are of modular construction in order to meet
different requirements, such as dust characteristics or the volume of exhausted air. Sturdy and low-noise units allow for problem-free 24-hr. operation with constant air flow. Short delivery times and competitive pricing are possible because of series production planning
Filter elements
The SINBRAN filter elements, a combination of sintered polyethylene and laminated GORE-TEX® membrane, combine the advantage of membrane filtration (low pressure loss with high filtration efficiency) with a long-life rigid frame construction. These elements are reusable, have BIA test certification according to DIN EN 6035-2-69 Appendix AA (08/99) and meet the requirements of dust class "M", formerly known as categories U, S, G and C. Alternative filter elements such as cartridge filters and Y-filters are also available.
|
|
|
|
|
|
Keller Lufttechnik plans, engineers, and manufactures air
pollution control systems for the capture, separation and removal of airborne particles for all types of industry. High filtration efficiency is achieved with innovative filtration technology and efficient design. Suitable exhaust systems offer solutions to individual applications while maintaining high quality standards.
The JET-SET series is especially suitable for the separation of high-volume fine dust particles. Nearly all types of dust can be successfully separated, such as those created in metal
processing, polymer processing, recycling industry, timber industry as well as non-metallic minerals.
The JET-SET units are modular in design in order to meet
different requirements, such as dust characteristics, dust
accumulation or the volume of exhausted air. The quiet units maintain a constant air flow, allowing for a trouble-free
24-hour operation. Short delivery times and competitive
pricing are achieved through series production planning.
|
|
SANTONI offers a wide range of highly efficient "Stand-alone" dust collection systems for extracting any type of dust generated by any process - such as grinding operation of any nature.
Specially designed suction hoods, in addition to several other features make these dust collectors exceptionally efficient
Features:
- High efficiency dust collectors
- Large fine filters
- Cyclone pre-filter
- Low dust loading of the main filter
- Filters do not clog
- Special manual / automatic filter cleaning devices (DC-series)
- High suction is maintained over long hours of use
- Special dust disposal facilities available
- Low noise options available
|
|
U.S. Air Filtration baghouses (also called pulse jet baghouse, pulsejet dust collectors, etc...) are self contained, fully automated where needed. We also supply and install ducting, access platforms, ventilation and instrumentation. Baghouses are engineered for dusts of 3 microns and larger, in the following applications:
- Woodworking
- Powder processing
- Material handling
- Primary metals, including steel-making
- Metals fabrication: grinding, sawing, sanding, polishing
- Papermaking
- Ceramics manufacturing
- Mixing and blending options
- Mining
- Foundries
- Glass Plants
- Battery Plants
- Universities
|
|
|
|
