|
|
Colloid mill works with shearing，grinding high-speed stirring．Grinding process occurs in the relative movement between the two teeth with one revolving in high speed and another still，which makes the material between the teeth receive strong shearing and abrasion in addition to high frequency vibration and high speed swirl．The above forces effectively evenly disperse，emulsify，smash the material.
JM-F/L is a new equipment that wet processes superfine grain．whichisusedto homogen。emulsify。mixand smash various semi-liquids．1iquids and latex emulsion.
|
|
The rotor-stator gap can be adjusted on-the-fly by turning a hand wheel
Changing the gap setting allows the user to modify the shear rate applied to the fluid and achieve the desired process results
Indicator dial defines gap-setting position and ensures process repeatability
This machine is designed to handle a wide range of applications and empowers the user to make simple adjustments to achieve the precise product qualities they require
Vertical or horizontal mounting position makes mill ideal for batch, batch-continuous or in-line applications
|
|
The mills of series 2000 have a modular design. Within the construction size the machines are convertible to the inline dispersing machines of series 2000.
Constant speed parameters and generator geometries allow an exact scale-up.
All machines are CIP- resp. SIP-suitable.
Design, materials and surfaces correspond to the recommendations of FDA resp. EHEDG.
There are different grinding tools available.
The drives can be adapted to the respective conditions like flow rate, power requirement, protection type or ex-protection.
|
|
|
|
|
|
For optimised particle size distribution: The Nebulasizer
The NARA Nebulasizer is designed to optimise the particle size distribution of soft granulates and extrudates. This standardization is possible both with wet and dry granulates.
During the process the oversized agglomerates will be reduced in their size and simultaneously fine-grained resp. dust particle are applied on bigger agglomerates. In one step the coarse particles are eliminated and the fine particles are agglomerated, but without an unwanted crushing. A following process step like sieving is not needed.
Because of his simple layout the machine is easy to clean, why the Nebulasizer is of interest for the pharmacy and the food processing industry in equal measure.
The GMP construction consists of a minimum of components with a highly polished surface that makes disassembling and cleaning in no time.
Besides the stainless-steel construction there is also an alternative for heavy industry available. This construction is able to convert building material like moulding compound or ceramics.
Nara’s especially developed innovative principle of comminution minimises the shearing strain of the particles, so that a crushing of particle size is not given.
Because of the screenless construction a breakage of the screen is out of the question.
The Nara Nebulasizer is now available as a milling tool in the new generation of Nara-Pharmamills. It can be integrated perfectly into existing productions.
|
|
The Mycromix, Unymix and Pilotmix high-shear mixer granulators
When it comes to extremely homogeneous mixing results, granulate of the highest quality and top production performance with short drying times, OYSTAR HÜTTLIN is where to look first. With the Gentlewing® bottom or top drive options, mixing and granulating enters new dimensions. The OYSTAR HÜTTLIN high-shear mixer granulator with bottom drive is the best choice for simple granulation applications in combination with a fluid bed drier. The top-drive version satisfies the highest of demands. With UltraClean, SmartFlow®, vacuum system unit, solvent recycling and heating, this version can be modularly extended up to the SinglePot and to meet the requirements of a high-containment system.
|
|
|
|
|
|
Mixing Granulator for high-quality products
GMP design
Mixing tool can be raised up for easy inspection
User friendly controls with predefined process steps
Machine ready for connection
Also available as Single Pot Mixing Granulator
Machine Type
In the mixing granulator individual components of a recipe are homogenized by the vertical mixing impeller and a separately driven chopper. Binding agent is then added for wet granulation in the same machine. In order to dry the product, the mixing granulator can be designed as a Single Pot MGT-S (prepared for stripping and vacuum cleaning). For details please refer to the separate flyer.
Standard Configuration
In the mixing granulator individual components of a recipe are homogenized by the vertical mixing impeller and a separately driven chopper. Binding agent is then added for wet granulation in the same machine. In order to dry the product, the mixing granulator can be designed as a Single Pot MGT-S (prepared for stripping and vacuum cleaning). For details please refer to the separate flyer.
|
|
DOSO: Volumetric blender
ACCURATE METERING
DOSO is used for preparation of thermoplastic granule mixes in extrusion processes.
EASY TO INSTALL
Designed so that it can easily be installed directly on the load hopper of the process machine, or on a platform, or on a floor-mounted storage hopper to feed one or more machines.
FAST INGREDIENT CHANGE, FAST AND THOROUGH CLEANING
- Practical and easy access to all the components.
- Load hoppers with sight glass to visually check the level.
- Manual gate valve which allows inspecting the metering screw without having to empty the hopper.
- Unloading hatch for fast and easy emptying of the hopper
- Metering screws easily accessible without the use of tools for fast and thorough cleaning.
MODELS
DOSO is available in 9 models: 2, 3 or 4 ingredients for throughputs up to 300, 600 and 1000 kg/h.
|
|
VORTEX %u2013 HIGH SHEAR MIXERS FOR WET GRANULATION
The Vortex high shear mixers are designed to perform wet granulation processes, combining active products and excipients by adding a binder solution.
MAIN CHARACTERISTICS
- Granulation process is carried out very quickly thanks to the high energy transmitted to the product by the turbulence caused by the combined action of impeller and chopper blades.
- The impeller has a special design to reduce product sticking to the blades, and can be easily removed for cleaning.
- The product bowl is completely separated from the mechanical area by means of special seals with inbuilt pneumatic cleaning system.
- Machine lid prearranged for automatic product loading, binder or solvent addition, installation of washing nozzles, internal light and inspection window.
- The machine can be supplied through the wall or on a working platform and can be integrated with a fluid bed dryer for a complete granulation line.
|
|
Feature
1) This machine can mix all powder of powder is uniform.
2) The machine adopt outer-inner rotation and grain of powder is uniform.
3) The mixing barrel can be tilted freely at the angle of degrees for discharging and cleaning purpose.
4) The automatic stopping device can be set within the range of 0-60 minutes for automatic stopping.
5) Easy to operate, easy to wash, clean and move. It is very suitable for GMP food and pharmaceutical factories.
|
|
Application
Foodstuff, Feed, Dye, Pigment, Chemical, Spice, Fertilizer...etc.
Feature
1) The inner and outer layers dual-spiral "S" sign crossing of upper and lower mixing type is adopted. Mixing effectiveness is good. Speed is fast. Powder dust will not fly in operation.
2) Complete and through blending of raw materials by ribbon agitator
which create two layers and counter movement of flows.
|
|
Feature
1) The mixing barrel and blades are made of stainless steel, always keeping clean and away from dirt. The mixing barrel can be tilted freely at the angle of 0X~360X degrees for discharging and cleaning purpose.
2) The safety device can protect the safety of operator and machine. The automatic stopping device can be set with in the range of 0-60 minutes for automatic stopping.
Application
Foodstuff, General chemicals, Feed, Plastic, Dye, Cosmetics, Drugs, Plastic powder, Resin powder addition...etc.
|
|
| ... products without technical information |
| |
HSM office technology offers a large family of various document shredders, each one precisely tailored to a specific requirement. Whether for home offices, work offices, IT departments or professional document shredding. The only thing that never changes is the first-class quality of our high-end machines which are "Made in Germany".
|
|
Our shredders have been created for information security for your home and office.
In general we provide two types depending on the material: one for document only, and the other for paper, CD, etc.
Depending on the capacity, you offer large capacity and smaller capacity.
For more detailed information, please do not hesitate to contact one of our representatives.
|
|
Powerful pre-crusher for difficult jobs
Many of our screw compactors are fitted with a pre-crusher for a specific task. In some cases, however, an exceptionally powerful pre-crusher is required. We recommend a RUNI Heavy Duty Pre-crusher, either fitted directly to the compactor or as a self-contained unit:
For particularly dense, massive or tough materials
For materials of varying quality
For large amounts of material and peak periods in connection with a silo system
The RUNI Heavy Duty Pre-crusher is available in different sizes and shapes, depending on the material and the feeding process.
|
|
|
It represents an ideal equipment for the agglomeration, granulation and mixing of food, chemical and pharmaceutical powders. It is successfully used in the additivation ( flavouring, colouring, etc.) and encapsulation of mixtures or powdery products thanks to the proved uniformity and homogeneity of its fluid-bed process. Its use is suitable for thermosensitive products. It is available in several construction materials.
|
|
OYSTAR Hüttlin fluid bed systems have a modular design. The base devices are designed as heavy-duty 10 bar or 12 bar excess pressure lines and can be adjusted using various different options.
Depending on the application required the Oystar Hüttlin fluid bed system can be configurated as:
HD Hüttlin dryer
HDG Hüttlin dryer granulator
HDGC Hüttlin dryer granulator coater
OYSTAR Hüttlin concept solutions mark a clear move away from the conventional technology of the past almost 40 years. The different detailed solutions such as the Diskjet, the spraying system, the dynamic filter and the gas analysis for organic processes involve major process advantages that greatly benefit the user.
|
|
Ring Type Metal Chip Crusher
When nested turnings include solids, they must be removed from the chip processing system. The least expensive way to accomplish this is with a ring crusher. The ring crusher presses scrap material against a grate and cut down to a size that will fit through the grate. Any solids that cannot be pressed through the grate are sent out through the solids ejection chute. The ring crusher is a good choice for chip processing systems where metering of the materials is possible and solids are present.
|
|
CRUMBERS - AGGLOMENTATORS
Type CONDOR 450
Machine to recycle film of HDPE/LDPE to transform the film from very light and voluminous recyclate into granules heavy and compact capable of being used in an extruder.
|
|
The plastic Pulverizer on the market can be broadly into the following categories:
(A) hard plastic pulverizer, the pulverizing machine suitable for all types of small and medium-sized plastics plate.
(B) strong plastic pulverizer.
(C) the plastic pipe pulverizer.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
