|
|
Controller-One
CONTROLLER-ONE is a seal set of variable geometry, planned and produced to answer the request for a secure product, reliable and corresponding to the regulations concerning the reduction of the fugitive emissions of VOC and HAP. In the middle are three graphite rings with a conical torso configuration of very low density "activated" by two graphite rings with a conical torso configuration at a different angle and at high density. All that is contained by two, GR8807 Incobraid® rings, as wiper and Anti-Extrusion Rings: here is the Controller-One configuration! The innovative conical torso configuration of the graphite rings with different density that allows a great radial expansion already with modest torque loads. It fully utizes the elastic properties, reducing the friction strength exercised by the gasket on the stem during the movement, also decreasing damage sustained by the gasket itself, allowing a reduction of the effort requested by the actuator in the motion act. The great radial expansion capacities of the Controller-One is able to execute with success of the re-torque required to compensate the loss of weight of the gasket caused by the scratching of the stem, and keeping an unchanged seal efficiency troughout a long period of time.
|
|
Sealing – with innovative brush solutions from Mink-Bürsten.
• In machine tools, Mink strip brushes provide protection against lubricating emulsions and flying chips
• In woodworking machinery, our sealing elements block off dust and noise
• These brushes make ideal permanent seals for doors, gates, openings, apertures and gaps
• They provide a continuous sealing effect over the entire width of the working surface
|
|
PTFE as a fluorocarbon compound (polytetra-ethylene) is a suitable basic compound for sealing and guiding elements used in compressors.
Highlights
even without lubrication PTFE offers an exceptionally low friction coefficient when working together with metals
PTFE is highly anti-adhesive, no stick-slip effect
PTFE offers high elongation properties enabling sealing and guide rings to be mounted on single-part pistons with great ease
Typical Applications
compressors with full or low lubrication
rotary gas pumps
expansion machinery
liquid gas and vacuum pumps
wobble piston compressors
rotary compressors for loading and unloading silos
|
|
| ... products without technical information |
| |
|
The very different requirements created by the various welding techniques mean that specific products have to be specially developed. The industrial fabrics we use have specific coatings that leave the cover flexible but resist spatter and welding projections. Their para-aramid base has excellent mechanical resistance. Whatever the technique you use: arc welding, spot welding, laser welding... ASP has the perfect cover specially adapted to your exact situation.
|
|
|
DSTI offers a number of standard & custom union designs that have been used in the robotics industry. These assemblies can be used to transfer air & electrical signal data to & from the rotating gripper.
|
|
Panasonic G2 Robot Controller
64-bit RISC processors based controller with exclusive Windows® CE-based teach pendant provides a user-friendly interface which enhances productivity. Digital Interface with Panasonic digital power source makes it possible to adjust all parameters through the teaching pendant.
|
|
Self-adhesive sealing tape conceived for the sealing of joints according DIN 18542. Stress condition groups
1 + 2.
Characteristics: precompressed, expansive, resistant to driving rain, permanently elastic, ecologically beneficial, open to diffusions
Advantages
- Easily applicable without special tools
- Uniform and retarded behaviour of the compression
- The joints are sealed in one sole operating cycle.
The application of primers, preparatory paintings or
maskings are superfluous.
- Uneveness within the joints is completely compensable
by its expansive properties
- No setting period
- No problems as regards laterial adhesion
- Subsequent treatments, such as back-filling or
smoothing are not necessary
- No supplementary applications of sealants
The application of joint sealing tapes is independent of weathering conditions. The choice of the appropriate tape dimensopms os decisive for its function. Please contact us.
Everywhere, when a sealing tape meets with specific requirements, which sufficiently correspond to an airtightness inferior to < 1,0 and when the stress condition groups according to the German industrial specification DIN 18542 are not demanded, it is recommendable to apply the VITO VDB joint sealing tape.
|
|
tesa offers a comprehensive range of adhesive tapes for a wide variety of packaging applications. From sealing cardboard boxes and cartons, padded envelopes, inner packaging of boxes and bags, to security sealing of cartons, you can count on tesa's line of packaging tapes to protect your valuable packages throughout every step of the logistical chain.
|
|
|
The Girth Welder is a self-propelled welding system for field storage tank welding. It can reduce field storage tank welding time up to 40%. Weld defects are greatly reduced saving tank erection costs. This machine is available as dual or single sided. The Lincoln NA-3 control and welding head are fitted with wire feed rolls, nozzles, straighteners and 50 lbs (22.7 kg) wire reels. A flux recovery system is equipped with the machine for the recycling of flux. An adjustable frame allows for plates 6' (1.8m) to 10' (3m) tall.
|
|
Finally, an affordable entry into robotic welding – Marathon Mini-Z
Marathon’s new “personal weld cell” is the answer to repetitious manual applications. The Mini-Z can deliver the same punch as the bigger cells – at a fraction of the cost! The Mini-Z is a competent, stand-alone, option for short-run shops, or can be easily integrated into large scale production manufacturing operations.
A small footprint gives the unit ease of mobility and accessibility for tooling changeover. Shipped assembled and ready for immediate installation and production, the Mini-Z is a flexible alternative to manual welding.
The Mini-Z welder comes complete with:
• Compact footprint
• Lean cell design
• Work window 24” x 16” (W x H)
• Easy-to-program Kawasaki robot
• User friendly Teach Pendant controls
• Fronius weld control
• 3D weld path modeling
• Turnkey tooling/fixturing
• DeviceNet options.
Profit from over twenty years of industry experience and let Marathon Welding Automation guide your process! For further information please call 1-800-816-9661 or visit www.orbitform.com.
|
|
The Panasonic arc welding robot cell PerformArc ET (Electric Turntable) is of a modular concept, developed using standard reliable Panasonic components. The Panasonic standard cell is also available in the following specifications:
PerformArc MT (Manual Turntable)
PerformArc ET-XL (large work envelope)
PerformArc ET-XXL (extra large work envelope)
PerformArc ET-2PD (work envelope with 2 external axes PanaDice 200)
Technical Data:
• 2 worktables, 500mm deep and 570 mm wide, maximum payload 250 kg
• Maximum size of workpiece including fixture 1,000 x 600 x 500 mm
• L x B x H: approx 5.65 x 2.2 x 2.3 m, weight: approx. 3.100 kg
Options:
• TAWERS welding system with integrated power source TA-1400/1600/1800WG
• Panasonic industrial robot TA-1600/1800G2
• Panasonic MIG/MAG pulse power sources YD-350GE2 or YD-500AF2
• Panasonic DC TIG power sources YC-300BZ3
• Fume hood, Torch cleaning unit, Water-cooled welding torch
• Service & extended warranty package
• DTPS off-line programming & simulation software
Customer benefits:
• Economical and flexible complete system solution.
• Fully proven and tested before delivery.
• All components mounted to a common base for easy shipment, quick set-up and future possible location change by use of forklift truck.
|
|
Robotic Cell Provides Flexible Welding Solutions
The Z-Weld dual fixed-table robotic welding cell is for manufacturers looking to enhance productivity on small- to medium-sized welded parts. Shipped assembled and ready for immediate installation and production, the Z-Weld is particularly suited as an alternative to semi-automatic welding.
Marathon’s Z-Weld is adaptable to all models of robots and welding power supplies and can be pre-programmed to meet specific material and application needs. The cell’s 85 by 105 inch footprint minimizes floor space usage, and its forklift compatible base allows portability for flexible manufacturing layouts.
Designed to provide versatile automation, Marathon’s robotic cell can be used to weld various materials, including aluminum, steel, and stainless. Features include:
• Customer specific power supply and robot
• Two 30 x 40 inch tables mounted on a common machine base
• Manual or automatic doors at load/unload stations
• Full perimeter guarding with maintenance access door
• Air- or water-cooled torch assembly
• WatchdawgTM for Welding
• Torch reamer, exhaust hood, side access doors.
|
|
A sealing hose system was developed in cooperation with the Industrial Fire Brigade of Henkel KGaA Düsseldorf. This system enables sealing of positions which are difficult to access and which have operating pressures of up to a maximum of 10 bar (145 psi).
There are two set variations supplied: Premium Set and Base Set. Both sets are contained in a practical transport case and are easy to use.
|
|
CEPRO® offers an extensive product package to provide shielding against sparks and welding spatters. The choice depends on the type of risk, the frequency of use, the proximity of the spark source and the different environmental factors. Products can be supplied for horizontal applications (welding blankets) or vertical solutions (curtains). In a great many cases it is also necessary and possible to supply custom made products.
CEPRO®-CLEAR see-through curtains and strip curtains are resistant to all grinding sparks flying around and also offer a view of the work area. All CEPRO®-CLEAR products are M-2 flame extinguishing. They offer an excellent protection to nearby co-workers who can work without any risk of burns or damage to products.
CEPRO® heat resistant screens and curtains of fibreglass or silicate fibres offer a high degree of protection against welding spatters and important showers of sparks. To shield costly materials CEPRO® supplies welding fabrics and blankets with different cooling times which can resist temperatures of 550°C to 1200°C. They can be supplied with different types of coatings for increased mechanical load-bearing capacity, higher peak temperatures, prolonged heat contact etc.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
