|
|
Compact ejectors Schmalz X-Pump SXP / SXMP
Application areas :
The new generation of vacuum compact ejectors for the special tasks of the automotive sector and for use in automated vacuum systems in the sheet-metal and plastics industries.
|
|
Vacuum pump, blower or ejector – the choice is yours. The objective is always the same: vacuum! In our product range, you will find everything you need, from the smallest compact ejector to the largest high-performance pump.
- basic ejectors
- inline ejectors
- compact ejectors
- vacuum units
- vacuum pumps
- blowers
- vacuum centers
|
|
The Vacuum Generator is designed to produce a low-flow vacuum using the venturi principle. The vacuum generator converts compressed air to a vacuum consuming 4.9 CFH with an 89.6 KP Supply.
When air is allowed to flow through the generator, the high velocity of the air passing through the center port draws a vacuum through the side ports. Two red vinyl caps are provided to cap the unused output port.
|
|
|
ANVER offers a wide range of Single Stage and Multi-Stage Air-Powered Vacuum Pumps and Venturi Vacuum Generators that operate using plant supplied compressed air, including the following popular styles: Miniature Vacuum Pumps, MSPX Multi- Stage Vacuum Pumps, MSP Multi-Stage Vacuum Pumps, J-Series Single Stage Vacuum Pumps, C-Series Single Stage Vacuum Pumps and Mitey AirVac Air Powered Vacuum Stations.
|
|
|
The main advantage of the VR series coupling Venturi is, it facilitates the direct fitting on the suction cup which allows a simplified connection.
|
|
Very simple and compact design for use as a front-end suction generator for maximum efficiency.
• Decentralised vacuum generation
• Choice of variants in the low pressure range
• Low weight
• 2 design principles (standard T-shape and in-line)
|
|
Vacuum made to measure, perfectly controlled:
Reliable FIPA components: day or night, even for continuous production.
Vacuum generators (Venturi nozzles) for creating a vacuum in more than 400 sizes with suction capacities of 0,4 m3/h – 660 m3/h.
Conveyors in more than 70 sizes with feed-through apertures of Ø3 mm – Ø 50 mm.
|
|
Vacuum generator : SMX
- Ideal to be integrated in Robotics
- Function : gripping, blow, bistable, air saver, vacuum level control
- Suction flow: 3 to 12m³/h
- Self - regulation: to save compressed air stopping the vacuum generator when the vacuum level is reached.
|
|
- To provide an independent vacuum on each suction cup
- Modularity thanks to the choice of many vacuum connectors
- Quick to fix
- Air saving
- Versality and riability of grippings
- Suction flow: 7.2 to 115L/mn
- Vacuum: 74 to 80%
|
|
Designed for the graphics sector and in particular for gripping and separating stacked sheets. They are also recommended for all applications where the use of pneumatic cylinders is best avoided for gripping the items to be lifted by the suckers. Obviously the load must be compatible with the lifting force of the vacuum cylinder.
Rods with useful range from 17 to 30 mm
Cylinder lifting force-800 mbar (80% vacuum): from 0.45 kg to 2.5 kg
|
|
|
|
|
|
HV-SA series
Central ejector based on the Venturi principle. Includes two pressure supply ports and a vacuum connection.
When connection 1.1 is supplied with pressure, the Venturi nozzle generates vacuum.
An integrated check valve at connection 2 maintains vacuum in systems with slight leakage even when the ejector is switched off.
The integrated (automatic) air saving feature turns off the air supply to the ejector when the pre-set upper vacuum level is reached. If the vacuum level drops 150 mbar below this level, the air supply is turned on to the ejector until the pre-set vacuum level is reached again. This fulfills the "EMERGENCY ON FUNCTION".
To release the components that have been picked up, a momentary blow off ejects the components (a signal interrupter integrated into connection 1.2 stops the blow off function after 0.3 seconds).
An external 5/2way double solenoid valve is recommended to control the ejector by alternately activating connection 1.1 (start) and 1.2 (release).
Change "release" to blow off as seen on page 66.
The pressure supply port and vacuum connections are fitted with removable protective filters, which serve to protect the ejector from debris.
A silencer with self-cleaning granular filling (with an air consumption of 150 and 300 Nl/min) or a surface mounted silencer (with an air consumption of 500 Nl/min) is included in the scope of delivery.
|
|
Low cost, compact alternative to traditional vacuum pumps in single and mutli-stage designs. Includes model numbers starting with VG.
Gast's vacuum generators can be used to generate vacuum economically without a single moving part.
·• Patented design extracts maximum amount of energy from compressed air source while optimizing the level of vacuum generation
·• Severe duty series incorporates chemical resistant anodized aluminum with viton seals and valves to handle aggressive gases
·• Lightweight construction provides maximum flexibility and mounting ease
·• Lack of moving parts ensures long life and minimal maintenance
|
|
SERIES AP 72 VACUUM GENERATOR MODULE Venturi — Shut off valve — Check valve Monoblock vacuum venturi, diaphragm valve and check valve
Compact design Manual or pneumatic , actuation options ; Constant bleed option 5, 8 and 15 slpm of N2 @ 80 psig (5.5 bar); 26 in. Hg (100 Torr) of
vacuum generated with 80 psig (5.5 bar) and 60 slpm of Nitrogen
Stainless steel 316
|
|
General description
The Ejector is a mechanical device that generates the necessary vacuum for functioning of the dosing system. It consists of a drive nozzle, mixing chamber, non-return valve and an outlet connection.
Ordinary ejector construction is for pipes with water pressure up to 6 bar.
Reinforced ejectors are used for pipes with water pressure more than 6 bar.
Ejectors with "connection cock" are used when the ejector has to be separated from the pipeline in which there is overpressure.
|
|
# Direct vacuum generator - DP 2010 E
It is a simple valve of compact construction which generates a vacuum when compressed air is applied. The vacuum ceases immediately when the air supply is removed.
# Two-way vacuum generator - DP 2018 F
This two-way valve with integral non-return valve generates a vacuum when air is applied to the pressure port. For applications that do not require a sustained vacuum the valve can be used without the integral non-return valve.
# Vacuum driven liquid sprayer - DP 2005
This valve works on the venturi principial and is primarily used for air driven liquid spraying applications such as conveyor lubrication and sawing machines.
# Vacuum driven liquid sprayer with push-in fittings for ø4 tube - AT.005.4
This valve works on the venturi principial and is primarily used for air driven liquid spraying applications such as conveyor lubrication and sawing machines.
|
|
| ... products without technical information |
| |
|
|
|
|
FailSafe(TM) devices provide an optimum solution for applications where continuous operation is required in the event of a primary clock failure. The continuous operation is achieved using a DCXO that serves as a redundant clock source in the event of a reference clock failure by maintaining the last frequency and phase information of the reference clock. The unique FailSafe IP block eliminates sudden output phase changes, aka. 'phase bumps', which usually occur in conventional clock distribution devices as the user switches between two asynchronous reference clock sources.
Field Programmable Zero Delay Buffer is a high-performance clock distribution device that can be customized for a wide range of applications. The device is implemented on Cypress's proprietary non-volatile technology. It is fully programmable via volume or prototype programmers. The device enables the user to define an application-specific clock distribution device with customized input and output dividers, feedback topology (internal/external), output inversions and output drive strengths.
|
|
|
Silicon IC clocks enable applications such as servers, work stations, registered DIMMs, routers, wwitches, storage (RAID, SAN, NAS), set-top boxes, and imaging products like scanners, printers, and digital cameras.
|
|
|
Analog Devices offers ultra-low jitter clock distribution and clock generation products for wireless infrastructure, instrumentation, broadband, ATE and other applications demanding sub picosecond performance. ADI clock products deliver low jitter, low phase noise, and low spurs making them ideal for clocking high performance analog-to-digital converters (ADCs) and digital-to-analog converters (DACs). ADI clock ICs integrate PLL cores, dividers, phase offset, skew adjust, and clock drivers in small chip scale packages.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
