|
|
Dynamic with roller guide.
• Max. stroke 5,000 mm
• Max. speed 10 m/s
• Repetition accuracy ±0.1 mm
• Max. feed force 1,500 N
|
|
Electric motor solution for the individual sit-stand work station. Stepless height adjustment with customer specific stroke.
- drive for the assembly in the table base
- simple mounting
- integrated position measuring system
- single telescopic function
- synchronisation with up to 26 actuators |
|
LINAK has several years of experience in development and manufacture of 12 V DC and 24 V DC actuators. The LINAK actuator range offers lifting capacities ranging from 200 N to 10.000 N. All the linear actuators consists of three principal elements: A motor, a gear and a spindle including nut. The actuator is the unit, which converts the
operating voltage from the control box into a linear movement. Some of the actuators are available in black and grey. Please contact your LINAK representative for further specifications. |
|
Moog provides a wide range of custom Electro-Mechanical actuators for total axis control for industrial applications. All of our actuation products have the proven reliability and precision required for high performance motion control and long service life. Available in multiple sizes and with a selection of Moog-designed and built servomotors and drive electronics, actuation products are built to meet customers requirements.
Moog’s total axis control solutions include the all-steel 887 series with the ability to accommodate peak forces of 350 kN [80,000 lbs.] It is a fully validated, tested option for the most demanding applications.
|
|
| The Rolaram actuators are designed for precision applications which require high speed and medium to high duty with loads up to 400kN. There are 8 standard models to choose from with varying options, however all units can be customised to suit your exact application requirements. |
|
A comprehensive selection of linear actuators with programmable control of force, position & velocity. Standard resolution on all SMAC actuators is 5micron with 1micron and half micron options available. They also have a 100% Data Capture & Feed Back Facility.
They are designed to perform at exceptionally high speeds and with a very high degree of accuracy & repeatability. This makes them ideal for a wide range of positioning, measuring, inspection and pick & place applications. Particularly where 100% verification is required.
|
|
| MXE electric screw actuators are available in two bearing selections. Solid bearing design optimizes stress distribution for optimal performance. Profiled rail design uses THK Caged Ball technology to reduce friction and extend actuator life. Maximum loads range from 70 to 1472 lbs depending on options selected. Strokes available in any incremental length up to 120" depending on body size and screw/nut choice. |
|
Compared to their pneumatic and hydraulic "colleagues" electric linear actuators have many advantages:
- constant stroke speed
- no loss of oil
- mechanical self-locking
- almost maintenance-free
- exact positioning
- large number of speed variants
Whenever optimum combinations of load, speed, installation dimensions, precision and robustness are sought, elero actuator and control systems have the answer.
Even in extreme operating conditions such as:
- heat
- cold
- dirt accumulation
our actuators are trouble-free. Special models can be made of stainless steel, for example,to enable our products to be used outside or in the food industry. |
|
| There is an increasing demand for comfort, economic efficiency, safety and respect for ecological values, factors which drive forward the increased use of precisely controllable systems. This requires compact, high-performance and robust actuators at the interface between the control mechanism and the controlled processes. SONCEBOZ linear actuators are eminently suitable for such tasks. This is why they handle idling control in vehicle engines, control three-way valves in heating and air conditioning equipment or control physical processes in medical analysis appliances. All this is possible only because of the robustness against environmental influences, the high precision and proven quality of actuators. |
|
A comprehensive selection of combined linear rotary actuators with either direct drive or gearbox equipped rotary units. Standard linear resolution on all SMAC actuators is 5micron with 1micron and half micron options available. Fully programmable in force/torque, velocity and position with 100% data capture and feed back facility. The rotary resolution varies between 4864 counts for gearbox units and 20,000 counts for the direct drive. This makes them ideal for a wide range of positioning, measuring, inspection and pick & place applications. Particularly where 100% verification is required.
The SMAC unique “Softland” routine within the actuator allows the rod to approach at high speed then land on the surface of a component with a low programmable force. This unique feature is extremely useful whenever delicate or high value components are being handled.
SMAC electric actuators are used widely in packaging, labelling, automotive, SMT, robotics, pharmaceutical, medical assembly, laser cutting, high speed scanning, glass cutting, dispensing, switch testing, spot welding, soldering & measuring applications to name but a few.
|
|
The BEI Kimco Magnetics RA models are used in many applications ranging from Z axis control in semi-conductor lead bonding equipment to gimbal torques and pick-and-place robotics. Actuators feature maximum stroke of +/- 60 degrees, maximum torque of 20nm, through hole and set screw hole for easy shaft coupling and two through holes for field assembly mounting. Choices include arc-segment and cylindrical designs.
|
|
The ROTARY system is nothing less than a revolution, a silent one that the user does not even notice, as it works behind the scenes. The effect, however, is clear to everybody and ROTARY is the powerful alternative for manufacturers of care and rehab beds. By supplying the
ROTARY motion directly, the number of fittings required on the bed can be reduced. This enables bed manufacturers to integrate a ROTARY actuator far more elegantly than a linear actuator." |
|
| SKF rotary actuators are designed to provide rotary motion. Fast or slow. Heavy or light duty. Complex or simple arrangements. You can chose from a wide variety of application areas. You will find a solution with both technical and economic advantages. Since the gearing is produced in one stage, through the use of a ball screw, you can also rely on a high degree of efficiency. Select the zero-backlash versions for maximum precision. |
|
High Performance Electric Servoactuator – INDACT® – According to ISO 6431
ISOMOVE (1-20KN)
• Electric servoactuator by the means of a precision Ball Screw, suitable for high performance applications, featuring overall dimensions and mounting style according to ISO 6431.
• 6 different sizes (IM032, IM040, IM050, IM063, IM080, IM100).
• Wide range of Ball Screw Pitch selection for each size.
• 3 different motor drive solutions (Stepper, Brushless, Custom).
• “D” version featuring axial / direct mounted motor drive with zero-backlash coupling.
• “R” version featuring reduced / parallel mounted motor drive with zero-backlash belt gear.
• 2 different reduction ratio (1:1, 2:1 – “R” version only).
• Max Nominal Thrust up to 20KN.
• Max Linear Speed up to 1600mm/sec.
• High Efficiency mechanical transmission.
• Duty Cycle 100%.
• Grease lubricated.
Modular design according to ISO 6431 allows for maximum adaptability to the widest range of industrial high performance applications.
Wide range of standard accessories/features to ISO 6431.
Special execution on request, please contact Setec Group Italy.
|
|
Electric Linear Actuator – INDACT® – Orthogonal-mounted Motor Series
ECO (1,7-100KN)
• Electric Linear Actuator featuring orthogonal-mounted motor, by the means of worm-screw/worm-wheel gear, for industrial application.
• 6 different sizes (ECO1, ECO2, ECO3, ECO25, ECO50, ECO100).
• Wide range of linear Force/Speed for each size.
• Max nominal force up to 100KN.
• Max linear speed up to 78mm/sec.
• “T” version, featuring Trapezoidal spindle (self-locking).
• “S” version, featuring Ball Screw spindle (high efficiency).
• Powered by AC/3-phases/IP54 motor.
• Duty Cycle 25%.
• Grease lubricated.
Strong industrial design provides maximum performance together with highest reliability, to meet the toughest requirements in harsh and severe environments.
Wide range of standard accessories/features.
Special execution on request, please contact Setec Group Italy.
|
|
Electric Linear Actuator – INDACT® – In-line Series
ECU (0,25-60KN)
• High efficiency Electric Linear Actuator, featuring in-line motorization (with or without precision planetary gearbox), suitable for industrial applications.
• 5 different sizes (ECU0, ECU4, ECU5, ECU6, ECU7).
• Wide range of linear Force/Speed couples for each size.
• Max nominal force up to 60KN.
• Max linear speed up to 466mm/sec.
• “T” version, featuring Trapezoidal spindle (self-locking).
• “S” version, featuring Ball Screw spindle (high efficiency).
• Powered by AC/3-phases/IP54 motor.
• Duty Cycle 25%.
• Grease lubricated.
Strong industrial design provides maximum performance together with the highest reliability, to meet the toughest requirements in harsh and severe environments.
Wide range of standard accessories/features.
Special execution on request, please contact Setec Group Italy.
|
|
Linear actuator with DC motor: Adjusting force 200 N; Adjusting range: 10 mm; Adjusting speed: 2,5 mm/s
|
|
Based on modified hybrid stepping motors, our AxialPower Plus motors are capable of producing linear forces up to 800 pounds and resolutions up to 0.000125" per 1.8° step. The reliability and precision of our AxialPower Plus and L3 motors come from using only the highest quality parts. We use stainless steel to increase the durability of our actuating leadscrews. And our internal rotating nuts are made from a range of engineered polymers for low-friction, smooth operation.
For applications needing a little more force, try our L3 linear actuators. |
|
L02 L03
Max Force: 2.000 N Max Force: 5.000 N
Speed: up to 100 mm/s Speed: up to 30 mm/s
Power supply: 12 - 24 Vdc Power supply: 12 - 24 Vdc
Stroke: up to 800 mm Stroke: up to 700 mm
Accessories: magnetic limit switches, encoder, safety nut |
|
ALI1
ALI1F (with integrated limit switches)
Max Force: 1.200 N
Speed: up to 90 mm/s
Power source: 12 - 24 - 36 Vdc
Stroke length: up to 300 mm
Accessories: integrated limit switches, encoder
|
|
EC1 EC2 EC3 EC4 EC5
Max force: 5 KN /…/ 50 kN
Max speed: 230 mm/s /…/ 15 mm/s
Stroke: up to 650 mm / … / 1800 mm
1ph-3ph Vac
Accessories: integrated limit switches, rotative potentiometer, encoder, hand-wheel
|
|
ALI3
ALI3F (with integrated limit switches)
Max Force: 6.000 N
Speed: up to 35 mm/s
Power source: 12-24-36 Vdc / 230-400 Vac 50-60 Hz
Stroke length: up to 700 mm
Accessories: magnetic limit switches, integrated limit switches,
rotative potentiometer, encoder, safety nut |
|
ALI5 90° Version
ALI5 P parallel Version
ALI5 A in line Version
This new family of actuators allow a large number of combinations Forse - speed - dimensions - duty cycle, to meet most applications riquirements.
Max force: 15 kN
Max speed: 250 mm/s
Stroke: up to 1400 mm
1ph-3ph Vac - 90 Vdc
Accessories: magnetic limit switches, mechanical limit switches, encoder, safety clutch, safety nut
|
|
Electrical Actuator Microwin
SUPPLY VOLTAGE 12÷24V
NO LOAD SPEED 3÷36MM/S
NOMINAL LOAD 100÷1200N
DUTY CYCLE S3 30÷80%
STANDARD STROKES
50-100-120-150-200-250-300 |
|
ELECTRICAL ACTUATORS
Supply voltage 12÷24V
No load speed 3÷36mm/s
Nominal load 100÷1200N
Duty cycle S3 30÷80%
Standard strokes
50-100-120-150-200-250-300 |
|
RACO's positioning actuator is equipped with RACO's intelligent positioning motor, a three phase asynchronous motor with servo characteristics.The frequency converter, the position sensors and the position control is built into RACO's positioning motor.
This motor is available in three sizes up to 0.5 kW and it can be adapted to all of RACO's electric actuators, rotary actuators and linear actuators with this range of performance.
Benefits:
positioning regulation with position sensors
full motor protection with current and temperature monitoring
all of the sensor and control components built into the motor
programming with PC mask program
in conformity with electromagnetic directive
positioning accuracy < 0.5 mm
50% cost savings in comparison to conventional servos
stop braking as optional equipment
|
|
Linear electric actuator with integral microprocessor
> Limit switch control
> 7 mm/sec 8000 N (standard)
> 14 mm/sec 6000 N (optional)
> High performance
> Quiet running
> Robust
> Insulation class 1
> Certified to IEC 601-1 |
|
Venture DC Linear Actuators are available in both Acme Screw or Ball Screw versions and combine our Quality Linear Actuators with a DC voltage electric gearmotor providing a ready to install electric linear drive system.
Standard strokes 4, 8, 12, 18, 24, 32, 36, 40 and 52 inches (custom lengths available)
30% duty cycle motor rating
Optional features include;
Clutch
Limit switches
Reed, Hall Effect, Potentiometer and other sensor options
3000 lb static capacity / up to 1500 lb dynamic load
Lifetime lubrication
Designed for outdoor use
Compression or tension loads
Trunnion, Clevis, or Tube clamp mounting
High strength steel tube assembly with all-steel load support members
Long Life Acme or Ball Screw
12VDC, 24VDC, 36VDC, 90VDC, or 120VDC for rectified 120VAC Gearbox Designs |
|
The VecTac VT™ ball screw linear actuator series was developed to provide a high quality, rugged and durable linear actuator for lower force applications. Using a rugged aluminum alloy cylinder and chrome plated heavy wall steel piston, this fluid power replacement linear actuator insures rigid alignment of critical bearing supports.
The VecTac VT™ fluid power replacement linear actuator was designed to accept virtually any manufacturers' motor, has a thrust range of 400 to 2,000 lbs. and a linear velocity capability of up to 40 inches per second.
Its relative small size as well as the ease of adapting to any of the standard unit mounting styles makes the series of VT electric linear actuators a good fit in most linear motion industrial applications. Hall effect and Reed type limit switches are available. |
|
Globe Motors designs and manufactures precision linear actuators to meet both MIL-spec and industrial requirements. Custom designed to meet your specific application, these units offer:
-- reliable, consistent stroke
-- smooth push-pull linear force
-- tension/compression ranges to 3,000 lbs.
-- rates of travel to suit your needs, and
-- mechanical stops or positional feedback systems
Our experienced design and application engineers stand ready to assist you with motion control solutions; and our vertically integrated manufacturing provides the capability needed to deliver prototypes quickly.
|
|
|
|
