|
|
The BEI Kimco Magnetics RA models are used in many applications ranging from Z axis control in semi-conductor lead bonding equipment to gimbal torques and pick-and-place robotics. Actuators feature maximum stroke of +/- 60 degrees, maximum torque of 20nm, through hole and set screw hole for easy shaft coupling and two through holes for field assembly mounting. Choices include arc-segment and cylindrical designs.
|
|
The ROTARY system is nothing less than a revolution, a silent one that the user does not even notice, as it works behind the scenes. The effect, however, is clear to everybody and ROTARY is the powerful alternative for manufacturers of care and rehab beds. By supplying the
ROTARY motion directly, the number of fittings required on the bed can be reduced. This enables bed manufacturers to integrate a ROTARY actuator far more elegantly than a linear actuator." |
|
| SKF rotary actuators are designed to provide rotary motion. Fast or slow. Heavy or light duty. Complex or simple arrangements. You can chose from a wide variety of application areas. You will find a solution with both technical and economic advantages. Since the gearing is produced in one stage, through the use of a ball screw, you can also rely on a high degree of efficiency. Select the zero-backlash versions for maximum precision. |
|
Frame sizes: 60 mm, 130 mm, 200 mm
Max. speed: 200 r/min (200 mm-type: 110 r/min)
Max. thrust force: 100-4000N
Repetitive positioning accuracy: ±0.004°
Max. permissible torque: 0.9Nm - 50 Nm
Resolution: microstep 0.002-0.04°/step
Power supply: 230V AC for 130 mm/200 mm-type, 24V DC for 60mm-type
Marking: CE, UL and cUL |
|
A comprehensive selection of combined linear rotary actuators with either direct drive or gearbox equipped rotary units. Standard linear resolution on all SMAC actuators is 5micron with 1micron and half micron options available. Fully programmable in force/torque, velocity and position with 100% data capture and feed back facility. The rotary resolution varies between 4864 counts for gearbox units and 20,000 counts for the direct drive. This makes them ideal for a wide range of positioning, measuring, inspection and pick & place applications. Particularly where 100% verification is required.
The SMAC unique “Softland” routine within the actuator allows the rod to approach at high speed then land on the surface of a component with a low programmable force. This unique feature is extremely useful whenever delicate or high value components are being handled.
SMAC electric actuators are used widely in packaging, labelling, automotive, SMT, robotics, pharmaceutical, medical assembly, laser cutting, high speed scanning, glass cutting, dispensing, switch testing, spot welding, soldering & measuring applications to name but a few. |
|
| ... products without technical information |
| |
Oden electric valve actuator for turning applications.
High precision.
Fits all types of valves.
Voltage 24 VDC. Analogue control 4-20 mA or digital.
Torque up to 400 Nm. |
|
RACO's turn and part-turn valve actuator is a completely electromechanical final control element for operating fittings, valves and flaps, etc. with rotational movement ranging from less than 1 revolution to several revolutions.
The DM IV is assembled from components of the same proven building block system from RACO's electric actuators. This allows us to offer every customer the special turn and part-turn valve actuator for his needs at a low price.
The DM IV consists of the gear, motor and accessories.
|
|
Standard 2SA50.. 10 to 4000 Nm
Modulating 2SA55.. 15 to 2800 Nm
Speed ranges 1,25 bis 160 1/min
mechanical connection DIN ISO 5210 oder
DIN 3210
SIPOS 5 Flash
• Integrated frequency converter
• Upgradeable functionality
• Valve protection
• High positioning accuracy
• Variable positioning times
• Modular design
• minimal type variance |
|
-Explosion Proof rotary Actuators without spring return with torque from 10Nm up to 4500Nm
-For ball valves
-Power Supply from 24V AC up to 240V AC
-On-Off, 3 Point, Modulating
-Auxiliary switches
-Suitable for zone 1,21,2,22
-II 2GD EEx d IIC T6
-IP66 |
|
Oden electric valve actuator ATEX for turning applications.
High precision.
Fits all types of valves.
Voltage 24 VDC. Analogue control 4-20 mA.
Torque up to 30 Nm. |
|
G-Series Rotary Actuators
Product Description
Design Features: G-Series Actuators are available on large butterfly and plug valves where constant high torque capability throughout the stroke is required. They feature a rack-and-pinion design and are engineered for high-flow, high-cycle applications. They are available with either manual, cylinder or motor actuator input. The G-Series line of actuators provides long service life and features a rugged, heavy cast gear sector. Multiple bronze and stainless steel bearings provide support and minimize friction to assure smooth operation and throttling action.
|
|
Features:
- Anti shearing device (patented) for gentle product handling
- Integrated leakage air vent for improved filling efficiency
- Heavy duty housing and bearing support for minimized rotor tolerance
- Closed end rotor
Applications
- For use with granular products and pellets
- For gravity discharge and metering
- For feeding pneumatic conveying systems
- Suitable for differential pressure up to 15 psi (1bar) |
|
| ... products without technical information |
| |
HTR Hydraulic Rotary Actuators The HTR Series are heavy duty hydraulic rack and pinion rotary actuators suitable for a wide variety of applications, including material handling and valve actuation, in industries as diverse as machine tools, primary metals, mining and oil field equipment.
Standard pressure: up to 210 bar
Standard rotational range of 90º, 180º and 360º
Options include port positions, cushioning, different seal types and mounting styles.
Special designs to customer specification |
|
The HTR Series actuator incorporates many hydraulic and mechanical features that make this actuator suitable for high production applications. The Series actuators have been successfully employed in automotive plant production machinery; machine tool equipment; plastics and rubber processing machinery; basic metals production machinery and in material handling machinery.
Features:
Tapered Roller Bearings
Ductile Iron Housing
SAE Side Ports
Wear-Pak® Pistons and Seals
Chrome Alloy Steel Pinion and Rack Gears
Specifications:
Maximum Operating Pressure: 3000 psi(207 Bar) non-shock; except HTR22/45, 2000 psi(138 Bar) non-shock
Standard Rotations: 90°, 180°, 360°
Rotational Tolerance: -0°, +2°
Output Torques: 900 to 600,000 lb-in @ 3000 psi(204 Bar)
Maximum Breakaway Pressure: 70 psig(4.8 Bar)
Mounting Orientation: Unrestricted
Operating Temperature Range: -40 to 180°F(-40 to 82°C) Nitrile Seals; -20 to 250°F(-29 to 121°C) Fluorocarbon Seals
|
|
Principle: rotary actuator after helical gear switch prinziple
combined with a linear cylinder
Size: 40 bis 125 [mm]
Max. allowable operating pressure: 160 [bar], higher on request
Torque: till 2.050 [Nm], higher on request
Angle of rotation: 90°, 180°, 270°, 360°, and any intermediate angle, even above 360°
Stroke: 0 to 1200 [mm], higher on request
Temperature range: -25°C to 70°C
Options: end cushioning, longe-range adjustable end stop, control switch assembly, locating pin, etc..
Special on request. |
|
| ... products without technical information |
| |
|
|
