|
|
Rectangular Guage Block:
- Practical master gage for dimensional measurement
- Two types of steel and ceramic gauge blocks are available.
- Four classes of Class K, Class 0, Class1 and Class 2
Long Size Gauge Block Accessory Sets BMX-S1:
- Accessories for gauge blocks with a nominal size of 125 mm or more
- Used to create the masters of height and size.
- A scriber is also available.
Square Gauge Block:
- 24.1 x 24.1 square gauge block
- Three classes of Class 0, Class 1, and Class 2
- Absolute wringing using the hole
|
|
On-line thickness measurement systems for:
* flat films and sheets, thermo-formed sheets made of PET, PVC, PUR, etc.
* coexruded film
* coated and uncoated rubber sheets
Thickness range: 10 µm ... 6 mm
Measuring uncertainty: 1 % of reading
The measuring system is unaffected by variations in density, humidity and colour of the material t be measured as well as unaffected by variations in temperature or vibrations of the surrounding fields.
|
|
Employing proprietary optical scanning technology, the CP7300 provides fast, noncontact, automated 3D surface height, roughness, and local area planarity and uniformity measurements on wafers for rapid, quantitative characterization of photo-lithographic, etch, and polishing process effects. Surface metrology applications include, but are not limited to, measurement and process control of critical surface texture parameters on bare and patterned wafers.
Programmable and automated measurement sequences and sample positioning allows for surface characterization at multiple sites and locations. Integral to each system is a comprehensive and powerful software analysis package with application-specific modules, providing full 3D imaging and data reporting of many surface topography parameters.
|
|
|
Scanning Frames are a critical factor in making a profile measurement. If the material is not presented to the sensor in an accurate and repeatable way, you will not be able to get the most accurate and repeatable measurement. This is why NDC places emphasis on engineering and producing the most accurate scanning frames in the industry. Our scanning frames' registration performance, coupled with our sensors' accuracy and repeatability, give you the most accurate profile measuring tool available.
|
|
Developed and manufactured at Bowers Bradford Site, this new range of internal measuring devices - Bowers SmartPlugs are designed to give the operator great speed of use, unmatched measuring accuracy and superb repeatability.
|
|
The Universal Measuring Gauge has been designed for measurement of internal and external dimensions such as inside & outside diameters, internal & external threads,grooves,tapers,splines,shallow spigots and recess diameters etc. The large variety of accesories can be interchanged to enable the measurement of virtually any type of workpiece.
|
|
Features:
- Patented linear ball bushing movement
- Full 1" of gaging travel / retraction
- Wide measurement range with up to 4.5" ID/ hole to hole and 2.5" OD/ thickness
- Light weight precision machined aluminum frame
- Economically designed thermal isolation handle
- Can be hand held or bench mounted
- Wide variety of standard interchangeable contacts with special application specific contacts available upon request.
- Frame can accommodate dial indicators with 1" of travel, digital indicators, or electronic probes.
|
|
Solartron%u2019s Universal Block Gauge makes precision measurements a simple and reliable process within cavities, internal diameters and more generally when space is limited.
The Universal Flexure Gauge is a compact, frictionless parallelogram device that does not suffer from the wear usually associated with bearing systems
|
|
PRECISION MEASUREMENT & CONTROL SYSTEMS - PIPES & TUBES INDUSTRY
Beta LaserMike offers a complete line of process control instrumentation for the manufacture of products such as tube and pipe extrusions. Our systems offer varying levels of capability, utilize different measurement techniques, meet the needs of both on-line and off-line applications, and can be customized to fulfill your specific requirements.
* ID/OD/Wall Measurement
* Tolerance Checking
* Process Control
* SQC Graphical Interface
* Concentricity Measurement
* Weight & Throughput Measurement
* Non-contact Length and Speed Measurement
|
|
The measuring systems series MFE (metrology front end) is
particularly suited to manufacturers of structured wafers, masks,
MEMS and similar products. Because of the very high cleanliness,
process and yield requirements, all tools are especially designed
for use in cleanrooms.
MFE systems measure critical dimensions and overlays on the
one hand and 3D topography or film thickness on the other.
All tools are metrological and comply with the necessary industry
standards such as the SECS II / GEM software interface.
Furthermore, the system is fully automated and equipped
with wafer cassettes and part carriers.
An EFEM and mini-environment for class 1 cleanrooms
rounds off the upper segment of the MFE tool series.
|
|
The MicroGlider® is the highly precise, multi-sensor platform
measuring system from FRT intended for especially accurate
measuring applications. A linear motor driven, non-contact
air bearing x-y stage guarantees best precision motion during
stage movement. Hence the MicroGlider® measures profile,
topography, roughness, and coating thickness with further
enhanced accuracy. The MicroGlider® is also equipped
with a CCD camera for easy sample positioning and can
automatically perform predefined measurements.
|
|
Alignment and measurement of straightness, flatness, perpendicularity and parallelism
The FixturlaserGeo-series is a 1- or 2-axes alignment system for measurement, alignment and documentation of machine positioning. Typical applications are measurements of straightness and flatness on objects, such as machine tables, machine guides, rollers, or any component in your facility that requires high precision alignment and positioning.
The Fixturlaser Geo-systems are available with a series of different laser transmitters, receivers and fixtures for specific applications. All transmitters are interchangeable providing easy upgrade for future needs.
Optimized packages:
- Depending on the specific application, there are different packages with different laser transmitters and fixtures.
- Flatness measurements are performed in one axis.
- Straightness measurements are performed in one or two axes with up to 99 measurement points.
- Live values are displayed during adjustments.
T- he measurements can be stored with individual comments to each measurement point for transfer to a PC or printed on the supplied printer.
|
|
Atomic Force Microscopy
Atomic Force Microscopes (AFMs) scan the surface of a sample using a very fine tip on the end of a microscale cantilever.
Atomic interactions between the tip and the surface lead to a deflection of the cantilever which is then detected by a piezoresistive element. Based on this effect, the AFM can measure the topography or roughness of a surface with very high resolution non destructively. The AFM can be used in different operating modes and thus allows for the investigation of further properties, such as electrical and magnetical forces or elasticity of a specimen.
|
|
Grinding relief quality measurement of threads and chamfers on taps:
The measuring device RELIEF EXPERT is designed for precise measurement of the grinding relief of threads and chamfers on almost all types of straight and spiral fluted workpieces.
- taps
- thread formers
- thread milling cutters
|
|
Description:
Nowadays, the properties of surface topographies are increasingly influenced by new processing methods and new materials.
The traditional profile stylus method is often not adequate to characterize the functional behavior of surfaces. Three-dimensional recording and evaluation are required. Soft and thin-walled materials also require non-contact measurement.
Moreover, ever higher levels of surface quality are being achieved, greatly increasing the requirements placed on measuring systems in terms of resolution and measuring accuracy.
The MarSurf WS 1 satisfies all these requirements:
- Vertical resolution 0.1 nm (.004 µin)
- Three-dimensional measurement and evaluation in only a few seconds
- Compact measuring station configuration for the workshop and laboratory
- MarSurf XT 20 software
- Topographical evaluation software on the fully standardized and powerful MarWin software platform
|
|
Features :
- Roughness and contour in a single stroke You need only half the time and your work is faster, more reliable and more efficient.With just one measurement, you have all the results for
roughness and contour characteristics at a glance. So you have more time for other things!
- State-of-the-art measuring technology for small tolerances. The integrated optical measuring system provides pinpoint accuracy over a broad measuring range and at maximum resolution. You can process jobs with low tolerances and thus tackle new challenges head-on.
- Innovative tracing arm concept for maximum stability The tracing arms, which have been designed using bridge-building techniques, ensure maximum rigidity, low-oscillation measurements and unwavering precision. So you can build your own bridges - to new dimensions of flexibility!
- Tracing arms with magnetic connection The magnetic mount ensures excellent system protection and a long service life.
|
|
Precision sensors for fast, accurate acquisition of component dimensions and surface data.
The world's leading range of touch-trigger and scanning measurement systems for co-ordinate measuring machines (CMMs), plus the revolutionary Renscan5%u2122 5-axis scanning technology.
|
|
MEASURING PLUG FOR INSPECTING BORE DIAMETERS
M1 Star is a highly advanced line of measuring plugs developed by TESTAR, a MARPOSS division, for inspecting bore diameters.
The M1 Star MBG (Mechanical Bore Gauge) is the ideal manual instrument for precision measuring of inside diameter, ovality or taper.
|
|
Intelliprobe™
The Intelliprobe™ for the API Laser Tracker is the ideal tool for large and complex parts. With the help of the Intelliprobe™ it is now possible to use the superior range of the API Laser Tracker to measure hidden geometry and even points from larger structures and assemblies.
Unlimited measurements
Geometry measurements without direct line of sight with the laser beam often pose challenges to laser tracker users. However, this is not the case when using the Intelliprobe™ from API.
Intelliprobe™ advantages:
*
Uninterupted measuring made easy: The laser beam can be recaptured with the Intelliprobe™ at any time
*
More Options: Even the most difficult to measure hidden structures are made simple with the Intelliprobe™. Optional probes lengths are available up to 700 mm
*
With intelligent accessories such as the Intelliprobe™ , the user is able to extend the range of application of API Laser Tracker.
Unsurpassed Handling
The Intelliprobe™ from API captures hidden geometry and obstructed points easily, as the probe is able to swivel around its own main axis. Thus, the system is easy to use for over head measurements which are usually difficult to reach. Together with the T3™ Laser Tracker from API, the Intelliprobe™ is the most compact 6 DOF-System on the market.
|
|
Leica T-Probe is a “Walk-Around” armless wireless probing device for probing of hidden, hard-to-reach points and measuring of up to 9 cars in one setup with minimal setup times, sets new standards by increasing accuracy, offering a ten-fold increase in point acquisition rate and providing user-assignable multi-function buttons
Small, light, user-friendly, and more accurate than any other hand-held probe in the world, the Leica T-Probe gives you more than 6 Degrees of Freedom: It gives you the right way to measure. Now featuring longer styli, Leica T-Probe reaches up to 30m (98ft) in any dimension.
|
|
“Ultimate geometry“
The Multivision optical measurement system has the same functionality as a traditional profile projector, with the
added advantage that it instantly provides all measures in one go.
Multivision can be installed onto machines or used on benches in lieu of a profile projector.
For instance, when used on spring formers, where spring types vary considerably, Multivision will dramatically
improve the quality of production.
Multivision is ideal for three-dimensional measurements for:
Compression, torsion, and tensile springs as well as several templates
The instrument consists of:
•one computer box capable of controlling 1 to 3 cameras
•1 to 3 cameras
•1 to 3 illuminators (front or rear mounted for profile reading)
•harness for individual camera Start, sorter operation, correction communication (where possible), and machine stop.
|
|
Building on the proven reliability of ZYGO's trusted NewView optical profiler, ZYGO's NewView Delta provides important operational and performance enhancements which make it easy to measure precision parts right on the factory floor. The NewView Delta extends the field of view up to a full 30 mm diameter, enabling you to measure the critical area of most precision parts in one shot - no multiple measurements, no waiting. It's fast, it's accurate, it's repeatable.
Two models are available: the NewView Delta SA is designed to be used primarily with one microscope objective for a single type of measurement (flatness, roughness, step height, etc.).
The NewView Delta DA sports two super-long-working-distance (SLWD) objectives on a shuttle, making it easy to switch between two different measurement types (typically roughness and flatness) on the fly. You don't even have to change software setups - the NewView Delta senses which objective is in use and automatically uses the appropriate MetroPro® measurement configuration.
|
|
|
The PC 2200 is a state of the art flexible electronic/air column capable of operating with air gauging products and measuring probes. The advanced new column contains a multitude of measuring functions including static and dynamic gauging, classification grading, probe mixing, (A+B), (A-B), etc.
|
|
The CMS non-contact capacitive based hole and countersink measurement system has been established as the benchmark in measuring critical holes for military and commercial aircraft manufacturers around the world. Based on its ease of use, speed (measurement accomplished in a few seconds) and extreme accuracy ( /- 5 microns),
It has gained in popularity at various Airbus locations throughout Europe. The CMS system is particularly well adapted to the measurement of tapered holes based on its multi-sensor (48-sensor) approach to inside diameter mapping.
The addition of the CMS product line is a natural extension for Capacitec as they are currently the market leader in the supply of capacitive non-contact gap and displacement measurement sensor systems to the Aerospace market.
For further information, please contact :
Capacitec Europe
16 Rue Sejourné- 94044 Creteil – France
(33) 1 43 39 48 68
eurosales@capacitec.com
|
|
CMM Plug Gauges Tooling Ball
The range of specially manufactured products by Spheric-Trafalgar is designed and engineered to suit the needs of engineers in industry. These include Spherical Plug Gauges, CMM Reference Balls, Plain Reference Balls and Tooling Balls (sometimes known as Icky Balls). Typical uses for these special products include the gauging of internal bores, setting of CMM machines, setting of precision measuring equipment and general purpose use in jigs and fixtures.
|
|
Digimatic Height Gage:
- High-efficiency height measurement with the optional dedicated probe
- Measuring range: up to 1000 mm with 3 models
- Universal type that places emphasis on the ease of operation.
- Measuring range: up to 1000 mm with 3 models
ABS Digimatic Height Gage HDS:
- Provided with the ABS function of well-established rotation drive handle.
- Measuring range: up to 600 mm with 2 models
Square column with the ABS function
- Measuring range: up to 1000 mm with 2 models
Standard Height Gage:
- Universal type of square column height gages
- Measuring range: up to 1500 mm with 5 models
|
|
|
