|
|
- Hanging Platform: Creates a working platform around the edge of roofs and structures.
- Cantilever Platform: Used to provide a working platform and walk way around wall forms and partition walls.
|
|
The PODIUM UNIT FOR CAGE Of ELEVATOR includes/understands:
A cast solid framework
Extensible cross-pieces
Slides of back extension
Folding and adjustable mountings in height
Two extensible beams of safety in length retained by chains
A railing partly low
A plywood ép flooring. 30 mm
In option:
Trap door of access, Scale of nonfolding access, Flooring on the beams
Dimensional specifications:
Width of 1.60 m to 2.60 m (adjustable with the step of 5 cm)
Depth of 1.60 to 2.40 m (adjustable with the step of 1 cm)
Height from 2.50 to 3.70 m (adjustable with the step of 10 cm)
Working loads:
Overload circulation: 180 daN/m ²
Height of maximum form: 3.80 m (150 daN/m ²)
|
|
Tack welded tubular structure. Platform covered with sheet metal with or without retention, with galvanized non-skid steel decking hot; Fixed or dismountable platform; Feet with paste of fixing on the ground. FRENCH MANUFACTURE
MANERGO proposes to you a whole range of platforms to your measurements, being able to answer all kinds of application. All our platforms answer the security standards in force.
|
|
Custom-made elevators of DICTATOR after machine and elevator guideline
The DICTATOR Homelift DHM300 is a hydraulic elevator after machine guideline. It makes a barrier-free life possible - also in private houses and with very much cramped space conditions. The DICTATOR Homelift DHM300 will for each case of application custom-made and can thereby the existing place up to the last millimeter use. It needs only 80 - 200 mm below the lowest stop, starting from floor upper edge in the highest stop 2500 mm. The characteristics of a Homelift:
- slow Geschwindigkei: 0,15 m/sec.
- Dead man operation, i.e. the touch probe of the desired floor must be pressed until the elevator reached the floor
- in private houses no obligation to accept delivery by the TÜV
- Economical solution
The elevator DHE is the "large brother" of the DHM300. The DHE fulfills the requirements of the EN 81-2. Just like the DHM300 it is related to customers manufactured and co-ordinated with the respective installation situation. Also here the optimal utilization of the existing place has highest priority. The DHE drives with a substantially higher speed (0,62m/sec) in the burst mode. As Schachtgrube 200 mm are needed, as Schachtkopf 2700 mm. The DHE is particularly meant for the Nachrüstung in buildings, where an elevator with the usual requirements at Schachtgrube and Schachtkopf is not possible.
Both elevators are design-examined.
They are supplemented by the modular, steel pit system which can be arranged individually. All elements are not screwable, it welding necessary. Thus a problem-free binding is possible in and at the building.
|
|
|
These are "Hold-to-run" controls with Braille indicator for the blind. While in motion, the controls are interlocked for a pre-set time, with precedence given to the cabin's controls, so that there is no interference over movement should more people summon the cabin to the floor at the same time. The push-button panel on board has an alarm button connected with an acoustic alarm and an emergency button which activates the anti-power-cut device which in turn allows descent to the closest lower floor in the event of an interruption of the electricity supply.
|
|
|
This is the ideal solution for climbing two or three steps with a device which does not have a visual impact on the surrounding environment when idle or when it is necessary to avoid obstructing transit areas. This platform is characterised by a special flap alongside its perimeter which lowers on the landing side of the upper floor once the platform has traversed in order to reach the last rise and disappears completely when the platform is closed at the lower floor.
|
|
Extra space can be gained within a builging by utilising the head room available.
A PROVOST mezzanine floor can free space on the ground, doubling or even tripling available floor space.
|
|
Mezzanine floors take maximum advantage of the height of premises, doubling or tripling the surface area and enabling it to be fitted out as a storage area, changing room, or offices, etc.
The installation of a mezzanine is an ideal solution to maximise the space available by taking advantage of the height of the building.
Mezzanine floors are totally dismountable and re-usable, and their structure, dimensions and location are easily modified.
Advantages:
Quick to assemble, clean and easy.
Multiplies surface space in industrial premises.
Adaptable to the specific needs of the client, thanks to the great variety of sizes available, types of floors, construction systems, etc.
|
|
Maximize your volume utilization and profitability by choosing a raised floor or storage area from META. Our mezzanine floors in structural steel make it possible to overbuild large areas, multi storied raised floors can be created and circulation spaces be integrated. Installations can be created over existing storage spaces, workshops and machine rooms and you double the space available for use! Staircases and other access features can be incorporated to ensure the extra space is functional and easily brought into use.
Custom-made production
META Mezzanine floors can be tailored made to your requirements. Please ask for our Technical Representative to make an appointment to visit your site and advise you on your project. Please send a sketch layout with your quote request which includes the following information:
- Position in existing building with wall fixing location
- Location of fork lift access gate/s
- The runs of handrails etc
- Positioning of the steps
|
|
Building additional storage space represents a high cost; it's better and cheaper to make the most of your existing buildings.
Feralco platforms assure the profitability of your investment, thanks to:
- a cost-effective solution
- a fully versatile module-based range with capacity from 350 kg to 1,500 kg/m²
- optimisation of profiles thanks to calculation software and integrated manufacture
|
|
Our mezzanines are entirely carried out in hot profile what guaranteed a very great rigidity and makes it possible not to be penalized by a multitude of posts or pilot wheels.
Study with the installation, we can propose to you solutions with ranges of +de 12 M and loads from 250 to 2000 kg m ². All our installations are carried out on computer program, which guarantees the best quality ratio/price (according to bases for calculation referring in the calculation of the metal structures)
Realization with your dimensions at the price of the standard.
|
|
| ... products without technical information |
| |
Tool for Balconies (OBS)
TOOL "OBS" includes/understands:
A standard cast solid framework of platform PRM (module 2 F 1900)
A complete back extension with metal cross-pieces 2 telescopic feet allowing the support of the OBS either on the flagstone or on the veil
Complementary accessories:
Foot of recovery for fasteners in the openings
Closings of end
Under-rise for closings of end
Dimensional specifications:
Platform width 2.35 modulates 2 F 1900:
mini length 2.60 m - maximum 3.60 m
To carry out balconies:
width 1.60 m - ép. 20 cm
|
|
|
|
see the results for the following category
