|
|
-- Enhances Reliability for Portable Electronics --
The Conan 1.00mm mezzanine connector system provides a mechanically secure, high density electrical interface between parallel printed circuit boards. Conan’s mechanical features and palladium/nickel/gold plated electrical contacts qualify it for higher reliability use in portable and mobile electronic equipment.
-- Features & Benefits --
> "Click" engagement assures secure mating.
> 4.15mm low profile to 7.0mm PCB stacking
> 9 sizes: from 9 to 69 positions
> Blade-on-beam contacts allow “peeling”and prevent “stubbing.”
> SMT mounting with SMT hold-down for increased strength
> Mating polarization prevents backward connections
> PCB polarization prevents manufacturing errors
> Tape and reel packaging supports automated assembly.
> High Density 1mm Mezzanine PCB Connector SystemIdeal for Portable Electronics
For more information : www.fciconnect.com
|
|
- Card-to-Cable Connector
- Grid 1.27 x 2.54 mm
- Positions: 10/20/30/40/50
- Pin strip for SMT and solder wave
- Excellent Impedance values
- Outstanding contact properties (Contact resistance < 6 mOhm, mating force 0,18 N/Contact)
- Locking with plastic lever or metal clip |
|
- Card-to-Cable Connector
- Grid 2.54 x 2.54 mm
- 10-64 Positions
- Termination technologies: Solder-In, SMT, Press-In, Pressure, Pin-in-Paste
- Headers straight and right-angle
- Low Profile version available |
|
PCB plug-in connectors
The universal plugging system
For conductors up to 2.5 mm˛, the MULTI CONNECTOR SYSTEM provides all prerequisites for a continuous system wiring.
Applications:
PCB plug-in connectors
Feed-through plug-in connectors,
"Floating" plug-in connection for various mounting methods
Plug-in connectors on modular terminals
Benefits:
Original WAGO CAGE CLAMP® connection allows for fast, shock-proof and maintenance-free terminal connection. Depending on type, equipped with pin or socket connector
Operation with standard screwdriver
100% protection against mismating using coding fingers
Metric or imperial pitch |
|
ODU – as a specialist for customized solutions have all key competences under one roof: design of parts, tools, manufacturing equipment, own tooling shop, molding, stamping, plating, turning, In-House-Design and manufacturing of assembly equipments.
With all these possibilities we are able to offer “customized” solutions for our customers.
Reasons for a custom specific solution are:
Function, Design, Exclusiveness, Costs
Examples for custom solutions: Connectors for Chip Card reader for diabetes device, Connector for Patient monitoring, compl. Industrial control and so on. |
|
| ... products without technical information |
| |
More than 10 years ago CERATIZIT started the development and production of blanks for PCB-tools. CERATIZIT responds to the fast changing market and the growing demand for exquisite products by innovative grades and close partnerships with our customers.
Dimensions:
- due to a improved way of production CERATIZIT is able to offer and change between various diameters and lengths of blanks within very short time.
- standard size, as sintered: diameter: 3.25 +0,1 mm, lenghth: 38.30 -0 / 0,1 mm
Grades:
- a wide range of grades for drills and routers is available
- all CERATIZIT grades are considered as high-quality products and are well-known worldwide.
|
|
PCB Drill Blanks
Sandvik Hard Materials is the world’s largest supplier of the cemented carbide blanks used in PCB cutting tools.
The progressive miniaturisation of printed circuit board design requires ever smaller cutting tools.
In order to meet performance requirements in terms of wear resistance, rigidity and toughness.
Sandvik Hard Materials has specifically developed cemented carbide grades with an extremely fine grain size.
|
|
The 5800 Series Multi-Configuration Multi-Functional Test System offers:
• Combinational test platform.
• Three body styles: floor standing, benchtop or rack mounted.
• 21 slot PXI based backplane.
• 19 slots available for instrument cards.
• Automatic program generation software.
• Up to 3456 analog in-circuit test points.
• Separate user and personality power supplies.
The 5800 Series is designed to meet the ever-changing needs of today's fast evolving PCB manufacturing environment. Building on Aeroflex's long history of producing functional and in-circuit test machines, the 5800 combines both methodologies. The addition of PXI further increases the flexibility of this series of machines by enabling the user to implement solutions using not only Aeroflex PXI cards, but also cards from any PXI manufacturer. |
|
| IPTE develops test equipment, test handlers and turn-key solutions for the automation of testing and adjustments of PCB's and electronic products |
|
Fault coverage and return on investment, two major factors affecting the choice of a test system in today's competitive markets.
Combine these with the flexibility to adapt as technology advances and you have the blueprint for the most desirable test system on the market.
From board to program - the solution
PinPoint II 14 slot, has been engineered to meet these criteria. It is the fastest, most economical functional test workstation available, giving the best return on investment in the industry whether configured for diagnostics or functional test.
PinPoint II has, in its high specification and modular design, the stride and flexibility to keep one step ahead of the fast evolving electronics market. It is equally well suited to `one-offs' as it is to production quantities and the combination of test technologies within the one powerful environment provides the key to the diverse range of applications the system is suited to. In-circuit functional test of both analog and digital components, edge card functional, VI analysis, boundary scan, PXI test and schematic reverse engineering can all be included in the same test platform. Flexibility extends further into the interfacing of the tester to the unit under test. The PinPoint II has been developed to adapt to the needs of the customer - clips, probes, edge connectors and bed-of-nails fixtures can all be used. |
|
ATE QT2256-320PXI system is designed as a Combination Board Tester capable of testing highly complex and dense PCBs employing various test techniques on a single platform.
It can perform Board Level Functional Test through edge connectors of a PCB, and guided probe diagnostics utility to reliably repair Digital/Analog and Mixed Signal PCBs of various complexities for conventional PCBs.
It is an In-Circuit Device / cluster tester when High Current Pin Driver options are installed and interfaced to the UUT either through clips / probes or nail bed. Standard configuration is 64 Channels high current Pin Drivers.
It has in-built 20MHz 12bit Analog Driver / sensors synchronized with digital drivers for covering analog / mixed signal devices.
Integrated Boundary Scan Test controller (Up to 4 Chains) and software package can be used to test today’s PCBs with high density / high pin count devices. Uses latest technology Boundary Scan hardware with RAM based drivers / sensors in synchronization with ATE digital and analog pin drivers.
To effectively test CPU based boards without excluding the CPU from the test, the system offers optional Qmax patented Bus Cycle Signature System. |
|
| ... products without technical information |
| |
The largest range from the industrial leader
For the connection of PCBs into their device environment, WAGO offers a large range of PCB terminals. For conductor diameters between 0.08 mm˛ and 16 mm˛, in metric or imperial pitches of 2.5 - 20 mm, or from 2.54 - 10.16 mm respectively, a suitable solution is found for everyone - of course in screw-free connection technology with CAGE CLAMP®, plug-in clamp or the versatile CAGE CLAMP® S connector. |
|
| ... products without technical information |
| |
SMD FUSES FF 470
The Bussmann SMD Tron is designed to EIA-PD-100, DWG SOPM-7243.
A high temperature body material is capable of surviving a 60 second exposure to a temperature of 215°C. Because the SMD Tron is totally sealed, it can be subjected to cleaning by a wide variety of aggressive solvents.
PICOFUSES PF 257
The PF 257 fuses are designed to safely interrupt 50A at 125V ac. This excellent performance is achieved at power factors as low as 97%. Competitive components claim similar short circuit interrupting ratings, but at 100% power factor - a condition that rarely exists in real world applications. In addition PF 257 fuses are capable of interrupting a 300A fault at 125V.
MICROFUSES FF 785
At 250V ac, the 0.5 to 3A PC-TRON can safely interrupt 50A; at 125V ac, the 0.5 to 5A versions can interrupt 10.000A.
This high breaking capacity makes the PC-TRON subminiature fuse ideal for line-side protection of power supplies.
CYLINDRICAL FUSES CT 515
5x15mm glass fuses are available with axial leads. The fuse is available with an optional sleeve of flexible fluoropolymer (UL flammability rating VW-1). The tube will self-extinguish within one minute. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
The XC31B series are ultra small CMOS temperature sensor ICs. As a bandgap type temperature sensor is built-into the
XC31B, linearity, in comparison to thermistor type temperature sensors, is much better.
The operating temperature range of the series is from -30°c to +80°c.
The XC31B comes in a mini molded SOT-25 and
USP-6B packages with a supply current of only 7µA
(@VOUT=2.0V) and as such, is suitable for use with various portable devices. Output voltage is selectable in 100mV
increments within a range of 2.0V to 6.0V (at 25°c). |
|
The automation of odd-form component placement is economically justified when a variety of components need to be placed at high production rates. The flexibility of our equipment provides the automation capability of odd-form components even for variable batch sizes and a number of different component shapes to be placed.
|
|
Board level, or PCB-mountable pressure sensors use piezoresistive silicon die technology and are suitable for air or non-corrosive gases for pressure ranges from 1 to 500 PSI. Board level sensors are used for medical applications, air flow, HVAC, leak detection and other test and industrial applications.
|
|
Model 101A
General purpose ICP® pressure sensor, 100 psi, 50 mV/psi, 3/8-24 mtg thd with Jamb Nut, ground isolated
Measurement Range: (for ±5V output) 100 psi (689 kPa)
Sensitivity: (±10mV/kPa) 50 mV/psi (7.3 mV/kPa)
Low Frequency Response: (-5%) 0.5 Hz
Resonant Frequency: >=250 kHz
Electrical Connector: 10-32 Coaxial Jack
Weight: 0.39 oz (11 gm)
|
|
| ... products without technical information |
| |
|
|
see the results for the following category