|
|
Motor drive with through-going hexagon socket.
- integrated position measuring system
- simple upgrade from manual to motorized solution
- completely damped against vibration and noise by an elastic coupling as well as by several absorbers
|
|
The Bauer Aseptic Drive is a combination of an asynchronous motor with a smooth surface (without cooling ribs and fan) and a gearbox from the renowned Bauer 2000 range.
Features and benefits
Product range
Power rating 0,37 - 2,2 kW
Combines with:
BG Helical gears
BF Shaft mount gears
BK Bevel gears
Main features
* Easy-to-clean design allowing cleaning agents to drain off completely
* Dirt traps are avoided
* Re-infection avoided around the motor because the fan-free design means no air turbulence occurs
* High degree of protection (IP 67 and IP69K) as standard, with Aseptic acid and alkali resistant paint (pH2 - pH12).
* Motor windings equipped as standard with thermistors and class F insulation.
* Suitable for frequency inverter duty.
* CCC certified
Options
* Paint finish according to RAL tables
* Pre-fabricated 6 wire cable, 3m long
|
|
The VLT FCM 300 Series is a very compact alternative to the traditional solution with a VLT frequency converter and motor as separate units.
The frequency converter is attached in place of the motor terminal box. It is not higher than the standard terminal box - not wider nor longer than the motor.
|
|
|
|
|
|
Sumitomo Cyclo drives are unique and are still unsurpassed where drive technology is concerned. The Cyclo drive is superior to traditional gear mechanisms, since it only operates with rolling force and is not exposed to shear forces. By comparison with gears with contact loads, Cyclo drives are more resistant and can absorb extreme shock loads by means of uniform load distribution over the power transmitting components. Cyclo drives and Cyclo drive geared motors are characterized by their reliability, long service life and outstanding efficiency, even under difficult conditions.
Features
* High overload capacity, extreme shock load
* Long service life
* High efficiency
* Compact design
* Available as geared units and geared motors
* Ideal for operating under difficult conditions
* Lifetime grease lubrication on some sizes
Sizes: 34 models
Torque Rating: 7.2 to 68,200 Nm
Power Rating: 0.12 to 55 kW
Ratio Range: 6:1 to 119:1 (single), 104:1 to 7,569:1 and larger (multi-stage)
Mounting: horizontal or vertical (power takeoff facing up or down)
Motor Standards: NEMA, IEC, JIS, UL, CSA, CER
|
|
|
The Sumitomo Cyclo drive is unsurpassed by any other inline drive available in the market today. Cyclo's unique epicycliodal design has advantages superior to speed reducers using common involute tooth gears. Cyclo components operate in compression, not in shear. Unlike gear teeth with limited contact points, a Cyclo has two thirds of its reduction components in contact at all times. This design enables Cyclo speed reducers and gearmotors to withstand shock loads exceeding 500% of their ratings, and provide exceptional performance, reliability and long life in the most severe applications.
|
|
|
The Series M gear motor range takes advantage of many years of accumulated design expertise, together with the use of high quality materials and components. The end result is a series of speed reducing and geared motors offering high load carrying capacity, high efficiency, quiet running and reliability.
|
|
|
The Hyponic geared motor is based on 60 years of experience in the development and manufacture of gear and drive solutions. To date there are over a million Hyponic geared motors in service. The latest generation is characterized by a more compact design, a modular system, maintenance-free operation and universal installation positions. With the IP65 (wash down) option, the Hyponic is an ideal solution for beverage bottling plants and food manufacture. Hypoid gearing technology in case hardened steel, patented by Sumitomo, provides high efficiency and is far superior to the customary worm gears due to gear ratios from 5:1 to 1440:1. The Hyponic gear combines the cost advantages of the worm gear with the technical characteristics of a bevel gear.
|
|
|
|
|
|
Fine Cyclo® series for point-to-point applications
FC-A
Standard unit without bearing support on the output flange
F1C-A
Drive with output side cross roller bearing
F2C-A
Drive with output flange and integrated tapered roller bearing
Option: F-flange housing
F3C-A
Drive with output flange and tapered roller bearing
All FA types in 4 to 6 sizes
* Gear ratios 29:1 to 179;1 single-stage
* Rated torque up to 5,140 Nm
* Acceleration torque up to 7,610 Nm
F2C-C & F2CF-C
Hollow shaft drive, e.g. for cable bushing, with drive shaft running on bearing, in totally sealed design in 5 sizes
All FC types in 5 sizes
* Gear ratios single-stage 59:1, 89:1, 119:1
* Rated output torque 412 to 3,139 Nm
* Acceleration torque up to 6,278 Nm
* Hollow shaft dia. 49 to 99 mm
Fine Cyclo® series for path controlled applications
F2C-T & F2CF-T
With optimized curve profile, integrated tapered roller bearing and high torque
Option: F-flange housing in 7 sizes
All FT types in 7 sizes
* Gear ratios from 81:1 to 171:1
* Rated torque up to 6,140 Nm
* Acceleration torque up to 11,000 Nm
Advantages:
* Low hysteresis loss for precise positioning
* Compact design
* High torsional rigidity
* Low mass moments of inertia
* High overload capacity
* High efficiency
* Simple fitting and motor fitment
* Clamp ring design possible for motor fitment without key
* Lifetime grease lubrication for any installation position
|
|
Technology basket gearbox motors
From the component assemblies in the gearbox basket helical, flat, worm and planetary gears are produced. The following examples show the available expertise in delivering solutions.
Helical gearbox motor:
* axis height 71 to 315 mm
* output torque 30 to 6000 Nm
* speeds from 2 to 750 rpm
Flat gearbox motor:
* output torques to 2500 Nm
* speeds from 3 to 220 rpm
* reduction 6 to 250
Worm gearbox motor:
* output torques to 300 Nm
* reduction to 250
|
|
Uniblock design for foot and flange mounting. Gear case machined on all sides for universal application.
Revolutionary new gearing geometry here and in all the other models results in exceptional running smoothness. For special environmental conditions the gear unit can be fitted with two shaft seals.
|
|
Due to the unique combination of newly developed worm wheel material with special lubricants, extreme precision and optimized shapes, this powerful motor achieves comparatively high levels of efficiency and torque. The case machined on all sides enables diverse mounting options.
Double-chamber shaft seals made of HNBR are used as standard, guaranteeing complete leak tightness.
|
|
The uniblock gear case machined on all sides, the particularly stable case and minimum outside dimensions enable diverse mounting options and applications.
As a result, these motors often form an integral part of our customers’ machine designs. High precision manufacturing and top gearing quality guarantee minimum backlash in Watt Drive gear units.
|
|
|
|
|
|
The Hyponic geared motor is based on 60 years of experience in the development and manufacture of gear and drive solutions. To date there are over a million Hyponic geared motors in service. The latest generation is characterized by a more compact design, a modular system, maintenance-free operation and universal installation positions. With the IP65 (wash down) option, the Hyponic is an ideal solution for beverage bottling plants and food manufacture. Hypoid gearing technology in case hardened steel, patented by Sumitomo, provides high efficiency and is far superior to the customary worm gears due to gear ratios from 5:1 to 1440:1. The Hyponic gear combines the cost advantages of the worm gear with the technical characteristics of a bevel gear.
* Thanks to its closed system, it can be used in every installation position
* 100% maintenance-free through lifetime lubrication
* Efficiency < 90%
* Lower noise level in comparison to cylindrical or bevel gears
* Options: IP65, dust and waterproof for applications in the food industry and similar applications (on some sizes only)
* Hollow shaft design for quick and simple fitting
* "Hygiene + " version with food-grade grease as a lubricant (optional)
Ratios: 5:1 to 1440:1
Motor: 15W - 5,5 kW
Torque: 0,3 bis 1480 Nm
Electrical connection: 230 V – 400 V 3-phase, optional 1-phase and other international voltages
Housing: Aluminium housing with 2-component paint finish, compact and corrosion resistant
Types: Flange and base design
Shafts: Hollow or solid shaft; shaft diameter adjustable according to client requirements
Lubrication: Grease filled, maintenance free
|
|
With MOTOX we offer both a modular geared motor range and a comphrensive range of frequency inverters.
Torque range: up to 20,000 Nm
Power rating: up to 200 kW
|
|
We are a well renowned name among Geared Motor Exporters and Geared Motor Suppliers. We provide world class Helical Geared Motor. With the help our Geared Motor, we occupied a standard market place and are well accepted by a large group of people. Various type of Geared Motor are manufactured by us. We are moving ahead with our Geared Motor that are capable of changing the trends of the life styles.
When it comes to best quality Geared Motor, then there are very few alternatives available to Geared Motor provided by us. New materials and technical innovations from over years of research and experience has resulted in such advanced Geared Motor. Our industries are equipped with state- of -art manufacturing facilities. We have all modern machines needed for manufacturing. Our work force is the team of committed individuals, who understand and value their work.
|
|
With MOTOX we offer both a modular geared motor range and a comprehensive range of frequency inverters.
Torque range: up to 20,000 Nm
Power rating: up to 200 kW
|
|
With MOTOX we offer both a modular geared motor range and a comphrensive range of frequency inverters.
Torque range: up to 20,000 Nm
Power rating: up to 200 kW
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
