|
|
MDrive® Linear Actuator products combine leading all-in-one integrated step motor+driver technology with linear motion to deliver long life, high accuracy and unsurpassed repeatability, all in a package that is extremely compact and affordable.
MDrive Linear Actuator styles
Two (2) MDrive Linear Actuator styles are available:
* Non-captive shaft — a screw extends through the MDrive product and moves axially as the motor rotates
* External shaft — a rotating screw, integral to the MDrive motor, moves a screw-mounted nut axially
Precision rolled lead screws used with MDrive Linear Actuators are designed specifically for motion
control applications to deliver maximum life and quiet operation. Corrosion resistant and non-magnetic, screws are manufactured from premium grade stainless steel and available with optional teflon coating.
|
|
Moog provides a wide range of custom Electro-Mechanical actuators for total axis control for industrial applications. All of our actuation products have the proven reliability and precision required for high performance motion control and long service life. Available in multiple sizes and with a selection of Moog-designed and built servomotors and drive electronics, actuation products are built to meet customers requirements.
Moog’s total axis control solutions include the all-steel 887 series with the ability to accommodate peak forces of 350 kN [80,000 lbs.] It is a fully validated, tested option for the most demanding applications.
|
|
ERC and ERC2 series - Easy to Use RoboCylinder
An electric cylinder with built-in controller offering the ultimate in simplicity.
Available as slider and rod type
|
|
RCA Series is a compact RoboCylinder with 24 VAC servo motor and optical encoder.
The product has widely been accepted not only as a compact, programmable, electro-mechanical alternative to air cylinders, but also its integrated PLC function and user-friendly SEL language have made RCA Series an absolute all-rounder in the factory automation.
|
|
Motorized Cylinders with guide EZA Series
Power supply: 200 - 230 VAC or 24 VDC
Marking: CE
Dimensions: 54 (w) x 38 (h) mm
Stroke: 50 - 300 mm
Max. thrust force: 140 N
Max. speed: 600 mm/s (200 - 230 V AC-type), 600 mm/s (24 V DC-type)
Max. horizontal transportable mass: 30 kg
Max. vertical transportable mass: 14 kg
Dimensions: 74 (w) x 52,5 (h) mm
Stroke: 50 - 300 mm
Max. thrust force: 400 N
Max. speed: 600 mm/s (200 - 230 V AC-type), 600 mm/s (24 V DC-type)
Max. horizontal transportable mass: 60 kg
Max. vertical transportable mass: 30 kg
|
|
RoboCylinder RCS is an electric actuator with ball screw, linear guide and 230 VAC servo motor. Using the know-how obtained from manufacturing 150 thousand axis robots, while retaining the features such as high rigidity, acc/decl, and speed control, the price has been lowered to match that of rod-less pneumatic cylinders.
RCS Series is the next generation electric actuator that employs a high-speed, constant thrust force motor, which maintains constant payload at speed ranging from low to high.
|
|
Designed for ease of use and versatility, the new RoboCylinder RCP2 series features high performance, high ridigity, and high functionality.
Two new width sizes - 73mm Slider Type and 35mm Rod Type - have been added to the lineup, giving you more flexibility for your application needs. In addition, significant technological enhancements have been made in all areas, such as lower operating noise, ease of maintenance, and multi-point positioning of up to 512 points.
|
|
|
|
|
|
Duff-Norton manufactures electromechanical actuators, mechanical actuators (screw jacks), linear actuators, ball screw actuators, machine screw actuators, electric cylinders, rollerscrews, rotary unions (rotating joints), and air jacks.
Electromechanical Linear Actuator Products include TracMaster and LinearMaster Actuators, Packaged Controls, Modular Actuators and PowerMaster Motor Cylinders and Synchro Cylinders.
This Duff-Norton product line of actuators features load capacities ranging from 100 pounds to 100 Tons, gear or belt drives, acme screw and ball screw systems with various AC and DC input voltages. Packaged Controls operate the extend and retract function of the actuator and are available for all Duff-Norton TracMaster and LinearMaster Electromechanical Linear Actuators.
Duff-Norton Electromechanical Actuation Products are specially designed for a variety of commercial and industrial applications. These actuators are used for opening and closing, tilting and pivoting, lifting and lowering and positioning. Applications include gates, dampers, oven and processing tank doors, antennas, orthopedic tables and other medical equipment, ergonomic furniture, and agricultural equipment, etc. Custom design is also available for special applications. Electromechanical linear actuators are now being used in place of pneumatics and hydraulics when high maintenance and environmental problems (leaking hydraulic oil) are a concern.
|
|
|
Electro-mechanical actuators are packaged linear actuators in a ram style format with integral motors. They are used in applications where sealed, compact actuators are required with high power to weight ratios for precise actuation and positioning. Actuator load ratings range from 0.5 kN to 400 kN for light to high duty applications.
|
|
|
Power Jacks range of electromechanical linear actuators are available in capacities from 0.45kN to 400kN with linear speeds up to 7000 mm/min as standard. The products use machine screw, ball screw and roller screw drive technology in order to supply units suitable for intermittent or high duty continuous running applications. The linear actuators are available with features such as limit switches, encoders, brakes, inverter rated AC motors, DC motors, servo motors and hand wheels. The motor on the actuator can be positioned parallel, right angles or in-line with the actuators ram. For detailed information visit Power Jacks website at www.powerjacks.com
|
|
|
|
|
|
Recent sales of Zwick’s electro-mechanical testing actuator have provided unique solutions for customers carrying out diverse mechanical testing. For example, in the automotive industry it has been used to test seat head rests, foams, steering columns, gearshifts, brake pedal assemblies, switches, connectors, and solenoids. In the medical industry components such as needles and bone have been successfully evaluated, whilst for sporting equipment the system has carried out tests on skis, and snowboards.
This wide variety of tests is possible due to a truly impressive specification, and a reliable testing system based on many core components from the Zwick Roell Group product portfolio. The EM Actuator is the obvious solution for many different and complex testing applications.
The electro-mechanical testing actuator is quite unique as it can be directly assembled, at any angle, into a production line and controlled via dedicated I/O control systems, or it can be used in stand-alone mode with a dedicated test stand. In addition it can be fitted to any standard Zwick universal test frame thereby adding an additional test axis for tests which require side loads All standard Zwick attachments can easily be attached.
|
|
|
|
|
|
High Performance Electric Servoactuator – INDACT® – According to ISO 6431
ISOMOVE (1-20KN)
• Electric servoactuator by the means of a precision Ball Screw, suitable for high performance applications, featuring overall dimensions and mounting style according to ISO 6431.
• 6 different sizes (IM032, IM040, IM050, IM063, IM080, IM100).
• Wide range of Ball Screw Pitch selection for each size.
• 3 different motor drive solutions (Stepper, Brushless, Custom).
• “D” version featuring axial / direct mounted motor drive with zero-backlash coupling.
• “R” version featuring reduced / parallel mounted motor drive with zero-backlash belt gear.
• 2 different reduction ratio (1:1, 2:1 – “R” version only).
• Max Nominal Thrust up to 20KN.
• Max Linear Speed up to 1600mm/sec.
• High Efficiency mechanical transmission.
• Duty Cycle 100%.
• Grease lubricated.
Modular design according to ISO 6431 allows for maximum adaptability to the widest range of industrial high performance applications.
Wide range of standard accessories/features to ISO 6431.
Special execution on request, please contact Setec Group Italy.
|
|
|
|
|
|
High Performance Electric Servoactuator – INDACT® – According to ISO 6431
ISOMOVE (1-20KN)
• Electric servoactuator by the means of a precision Ball Screw, suitable for high performance applications, featuring overall dimensions and mounting style according to ISO 6431.
• 6 different sizes (IM032, IM040, IM050, IM063, IM080, IM100).
• Wide range of Ball Screw Pitch selection for each size.
• 3 different motor drive solutions (Stepper, Brushless, Custom).
• “D” version featuring axial / direct mounted motor drive with zero-backlash coupling.
• “R” version featuring reduced / parallel mounted motor drive with zero-backlash belt gear.
• 2 different reduction ratio (1:1, 2:1 – “R” version only).
• Max Nominal Thrust up to 20KN.
• Max Linear Speed up to 1600mm/sec.
• High Efficiency mechanical transmission.
• Duty Cycle 100%.
• Grease lubricated.
Modular design according to ISO 6431 allows for maximum adaptability to the widest range of industrial high performance applications.
Wide range of standard accessories/features to ISO 6431.
Special execution on request, please contact Setec Group Italy.
|
|
Venture provides a full service design capability for products in our areas of expertise. Variations of products can always be accommodated to support your special needs.
Basic Options
Strokes ~ 2" to 72"
Motor types ~ 110 VAC, 220 VAC, PMDC, and DC stepper
Various ratios available in gear drive, worm drive and belt drive
Feedback ~ Reed, Hall Effect, Potentiometer and encoders
Most available with limit switches, clutches or both
Various tube and end mounting options available
|
|
Linear Actuators
MORE SOLUTIONS FROM US EQUALS MORE SUCCESS FOR YOU!
At Cleveland Motion Controls, we have always believed in giving you more choices. After all, your application is unique, so the servomotor you choose for it should be unique, too.
While the competition stacks their shelves with motors and hardware, we pack ours with engineered solutions. The truth is, our shelf contains just about any type of solution you could require, from simple integration components such as brakes, encoders and tachometers, to elaborate breakthrough designs.
In addition to our high power density selection of clean operating, low maintenance servomotors, we also provide you with a range of standard integration and custom engineered options to round out your solution.
|
|
Linear Actuators offer best fits for a variety of applications. With both standard and customizable stroke extensions, these families can range up to 915mm (36 inches) in length and provide full load forces as high as 6800N (1500lbs). Available in both DC (12, 24, 36) and AC (115, 230, 400) voltage models, these actuators can also be packaged with a wide selection of controls and assessories.
Common applications would include:
NC Machines and other factory automation processes
aircraft landing gears, wing flap control, wing sweeps, thrust reversers
ergonomics of surface height adjustments for optimum work environments
medical and office equipment where quiet operation is mandatory
work-tables, conveyors, loaders/unloaders
squeegee lift on floor clearners, throttle controls on salt spreaders
automatice security gate positioning
raising/lowering of mower decks
jig positioning for flexible assembly operations
and many, many more
|
|
|
|
|
|
High performance integral linear actuators for "all electric" plastic injection molding machines
Thrust range 2,000 to 200,000 N
Speed up to 1 m/sec
High energy brushless permanent magnet servo motor
Integral high load ball lead screw, up to 80,000 N
Integral lead screw, high duty satellite roller type above 80,000 N
Built in absolute multiturn encoder
The range of integral linear actuators developed by Phase Motion Control for various linear positioning applications, and specifically to ease the replacement of hydraulic cylinders in plastic injection molding machines, delivers a complete functionality packaged in a single engineered unit.
The actuator consists of: A high performance, rare earth PM servo motor derived from the Ultract range, with a hollow shaft, which can take the fully retracted lead screw; A special front end with a high axial load bearing system (oblique contact ball bearing fin small units, barrel type conical roller bearings in the larger units) which houses the rotary nut of the lead screw, and which is driven by the motor part; In the back of the actuator, a multiturn absolute encoder which is used for electronic control of the electric piston across the stroke.
The actuators thus realized are endowed with exceptional stiffness and accuracy, travel speed up to 1 m/sec, can be controlled both in thrust and position, with repeatability better than 1/100 mm. All issues of screw lubrication, assembly, alignment, as well as the related drive train, are optimized and designed inside the unit.
|
|
ternary®
Linear and rotary actuators
For positioning applications where pneumatic exceeds the capabilities regarding:
* Flexibility/programmability
* Repeatability
* Integration with Motion Control systems
* Soft touch
* Force control
* Set up & installation time
* IP-protection
Highlights at a glance
* all in one: motor, controller, actuator/gearbox, fieldbus interface
* Force up to 1000 N
* Repeatability +/- 0,009mm (0.00035")
* Stroke up to 300 mm with ballscrew
* Ratios from 5 to 25 with planetary gearbox
* Speed up to 900 mm/sec
* Maintenance free
* Flange size 32 +46 mm available
* IP protection 65 (linear) / 64 (rotary)
Applications
High speed format changes in packaging & woodworking machines, assembly & dosing systems, semiconductor handling, robots, and many more.
Products
* via PC software
* with Teach pendant
* PLC controlled (parallel I/O)
* Serial field bus
* CANopen
* DeviceNet
* PROFIBUS
|
|
DSL 56 - Linear Actuator
With its two variants the DSL 56 ensures optimal linear motions. As a roller screw assembly for high forces and high velocities or as a ball screw assembly in simple applications for low-cost linear drives.
Compactness, dynamic response and high levels of torque, effectively implemented in a linear motion – these are the features of the DSL 56.
With its integrated screw assembly the DSL 56 converts rotary motion to linear motion. The link between Baumüller servo motors and an integrated screw assembly is ideally suited for applications with maximum demands in terms of force and dynamic response, in a compact design.
There are two models available: the roller screw assembly for high forces and high velocities or the lower-cost ball screw assembly for simpler applications.Consequently, the DSL 56 optimally meets the requirements of fields of application such as robotics, welding tongs and handling but also in the printing and plastics industries.
|
|
Frame Sizes 2-3.5 inches, 51 – 89 mm
Stroke Length 3-18 inches, 51 – 455 mm
Maximum Continuous Force Rating 1350 lbf, 6 kN
Maximum Continuous Torque Rating 37 lbf-in, 4 Nm
Maximum Velocity 22 in/sec, 559 mm/sec
Maximum Motor Speed 2500 rpm
|
|
|
|
|
|
The Feed Modules from Rexroth are suitable for using in handling applications as vertical axes or actuators. The complete linear units reduce the necessary drive power due to the smaller dead weight being moved and can achieve extremely precise, infinitely variable positions.
The modules consist of a fixed aluminum main body, a profiled aluminum tube with eLINE Hybrid Technology and runner blocks and spindles of different pitches and sizes.
The spindle moves a profiled aluminum tube, the spindle sleeve into which two steel tracks are admitted. Two fixed runner blocks in the main body guide the spindle sleeve accurately and cushion high longitudinal and transverse torques. The quadratic main bodies with cross-sections of 50mm, 70 mm and 100 mm, rastered, cover strokes of up to 400 mm.
Another special feature is the quick and easy assembly using the easy-2-combine interface. This positive connection technology with centering rings saves laborious alignment. In addition, unlike in many conventional solutions, you are also spared specially manufactured adapters.
You can order the feed modules either with a flange or belt auxiliary transmission for mounting on motors, or ready assembled as complete axes. There is a wide range of servomotors or stepping motors with an absolute encoder or standard encode and an optional brake. Positioning the motor on the fixed main body makes the electrical connection easier for you.
|
|
Electromechanical actuators becoming more and more the preferred drive technology in the field of linear motion. That is because they can handle a wide range of payloads, provide the desired controlled motion and are cost competitive. The rotational movement produced by the electric motor will be converted into linear movement by trapezoidal thread spindles installed within the thrust unit as basic design.
Benefits:
High efficiency of the mechanical system
Long lasting operation
Easy to install and putting in operation
High reliability even under worth ambient conditions
Full electromechanical principle without any leakage issue
Does not consume energy when stopped Low operating and maintenance costs
|
|
|
|
|
|
Electromechanical actuators becoming more and more the preferred drive technology in the field of linear motion. That is because they can handle a wide range of payloads, provide the desired controlled motion and are cost competitive.
The rotational movement produced by the electric motor will be converted into linear movement by trapezoidal thread spindles installed within the thrust unit as basic design. The selection of spindle lead guarantees self locking for RACO´s electric actuators. Static loads, which can be higher than the nominal thrust, can be maintained in any intermediate position.
Benefits:
High efficiency of the mechanical system generate high power output
Long lasting operation through wear and tear resistant thrust unit components
High reliability even under worth ambient conditions
Full electromechanical principle without any leakage issue (does not ice up or freeze)
Fulfill actual safety and environmental requirements
Does not consume energy when stopped
Easy to install and putting in operation
Low operating and maintenance costs
|
|
Venture DC Linear Actuators are available in both Acme Screw or Ball Screw versions and combine our Quality Linear Actuators with a DC voltage electric gearmotor providing a ready to install electric linear drive system.
Standard strokes 4, 8, 12, 18, 24, 32, 36, 40 and 52 inches (custom lengths available)
30% duty cycle motor rating
Optional features include;
Clutch
Limit switches
Reed, Hall Effect, Potentiometer and other sensor options
3000 lb static capacity / up to 1500 lb dynamic load
Lifetime lubrication
Designed for outdoor use
Compression or tension loads
Trunnion, Clevis, or Tube clamp mounting
High strength steel tube assembly with all-steel load support members
Long Life Acme or Ball Screw
12VDC, 24VDC, 36VDC, 90VDC, or 120VDC for rectified 120VAC Gearbox Designs
|
|
The ELIMINATOR HDL™ replaces hydraulic and pneumatic linear actuators with an electromechanical linear actuator with an Optional Load Cell. This combines force measurement with heavy duty and precise linear motion. It provides a clean, simple, rugged, and economical capability to directly and continuously monitor axial force while simultaneously applying that force.
This ball screw actuator can measure force in both tensile and compressive modes. The heavy wall steel construction and high dynamic capacity components ensure longevity and durability for production processes. Bearing press, component insertion, and product testing, are typical applications where this would be useful. As an integral package, the ELIMINATOR HD™ with load cell is less expensive and much easier to align than traditional ball screw component systems. As a sealed assembly, it is far less susceptible to contamination and physical damage.
|
|
Joyce/Dayton - Established 1873
Joyce/Dayton Linear Actuators are the newest addition to our extensive line of lifting and positioning equipment. Available in machine and ball screw designs these heavy-duty linear actuators can handle loads of up to 2000 pounds. Joyce linear actuators are offered in two distinct versions Motorized and Integrated.
All Joyce Motorized and Integrated Linear Actuators are designed for long service life and have been tested at full capacity for thousands of cycles to ensure trouble free operation. The lifting mechanisms consist of either a high tensile aluminum-bronze lifting nut or heat-treated ball nut connected to a heavy wall stainless steel lifting tube. The linear actuator housings are cast from rugged yet lightweight aluminum and include a cast mounting clevis or clevis option.
|
|
Acme or ball screw linear actuators.
Right Angle Design - High efficiency worm gear drive.
Parallel design - Timing belt drive to perform high linear speeds.
Lifelong grease lubricant. Minimum axial backlash.
Performing noiseless and running with high accuracy.
AC or DC motors.
Linear speed up to 500 mm/sec
Load up to 80 kN
|
|
At last, an all electric SKF cylinder performing with the power of hydraulics and the velocity of pneumatics.
SKF cylinders using SKF planetary roller screws are expanding the limits of linear cylinders. They are designed for long life, high acceleration and high force applications. The cylinders use brushless servomotor technology, with an in line or parallel drive as standard.
|
|
|
Electromechanical Linear Actuators (ELA) consist of a completely enclosed aluminium housing with worm gearing and axial bearing driven by a standard supplied electric motor as well as a thrust and shaft tube construction. Trapezoidal or ball screws. It is possible to install ELAs in any position and the thrust and guide mechanism is designed for both compressive and tensile loading. Other distinguishing features include robust construction and reliability giving ELAs a wide range of applications.
|
|
|
|
|
|
|
For a reliable positioning, flexible, with movements of adapted cycles, and an easy integration in the existing construction industries, do not seek further new electromechanical jacks EMC Rexroth. Thanks to their drive by their standard dimension and ball screw of precision ISO 15552, it is very easy to install and combine the advantages of the technique of drive of robust design with that of control and control. Electromechanical jacks EMC show the potential in the combination and collaboration in various Rexroth technologies. This overall principle `' loan-with-to install'' is made up exclusively of subsets manufactured in quantity starting from standard components of the leader of the linear, pneumatic and electric movement. The unit is available in six sizes offering variable lengths to 1500 Misters electromechanical jacks EMC are based on aluminum profiles for pneumatic jacks integrating of the screws ball rolled of precision balls. The profile is in conformity with the standard ISO 15552 and has sites to place sensors. Thanks to these dimensions standards, the users can combine the pneumatic and electromechanical jacks without any effort of design, and thus obtain a profit obvious on the technical plan and economic, an ideal solution for each specific application. If you wish it, Rexroth can provide the EMC with a servo-motor brushless standard MSK (IP65) or MSM, as well as engines step by step VRDM, adapted to the application, allowing a maximum speed of displacement of 96 m/min.
|
|
 see the results for the following category : Screw jacks |
|
|
