|
|
Zaber's latest line of micro linear actuators is capable of twice the speed and thrust of our T-LA series actuators. The T-NA actuators are also smaller, have better accuracy and resolution, and are more robust than previous designs.
Designed to replace standard micrometers on manual translation stages, T-NA actuators come with a built-in controller and is compatible with Zaber's entire line of T-series products.
|
|
|
The Model 8330 Picomotor actuator Ultra was designed specifically to minimize contamination and outgassing in clean-critical environments including vacuum ultraviolet (VUV) and extreme ultraviolet (EUV) applications. A special sealed bellow ensures the cleanliness of the actuators throughout its travel range. The actuators are ideal for precision motion-control and beamsteering applications in the semiconductor industry or in scientific laboratories down to pressures as low as 10- 9 Torr.
|
|
DRL Series Compact Linear Actuators
The DRL Series of compact linear motion actuators use a new 5-phase stepping motor which incorporates a ball screw. These are combined with 5-phase 24 VDC microstepping drivers with photocoupler inputs for extremely precise positioning.
|
|
|
The EMA series of electric actuators are available with Machine Screw and Ball Screw drives . They are suitable for low load, medium duty and high speed applications with dynamic ratings up to 10kN and 5500 mm/min.
|
|
ERC and ERC2 series - Easy to Use RoboCylinder
An electric cylinder with built-in controller offering the ultimate in simplicity.
Available as slider and rod type
|
|
RCA Series is a compact RoboCylinder with 24 VAC servo motor and optical encoder.
The product has widely been accepted not only as a compact, programmable, electro-mechanical alternative to air cylinders, but also its integrated PLC function and user-friendly SEL language have made RCA Series an absolute all-rounder in the factory automation.
|
|
Motorized Cylinders with guide EZA Series
Power supply: 200 - 230 VAC or 24 VDC
Marking: CE
Dimensions: 54 (w) x 38 (h) mm
Stroke: 50 - 300 mm
Max. thrust force: 140 N
Max. speed: 600 mm/s (200 - 230 V AC-type), 600 mm/s (24 V DC-type)
Max. horizontal transportable mass: 30 kg
Max. vertical transportable mass: 14 kg
Dimensions: 74 (w) x 52,5 (h) mm
Stroke: 50 - 300 mm
Max. thrust force: 400 N
Max. speed: 600 mm/s (200 - 230 V AC-type), 600 mm/s (24 V DC-type)
Max. horizontal transportable mass: 60 kg
Max. vertical transportable mass: 30 kg
|
|
|
Mini-RoboCylinder of RCL series with quiet 24 VDC linear motor: ultra-smal micro cylinder and micro slider: maximum speed of 1600 mm/s, maximum acceleration/deceleration of 2 G, load capacity up to 2 kg, and stroke of 30 - 288 mm.
|
|
RoboCylinder RCS is an electric actuator with ball screw, linear guide and 230 VAC servo motor. Using the know-how obtained from manufacturing 150 thousand axis robots, while retaining the features such as high rigidity, acc/decl, and speed control, the price has been lowered to match that of rod-less pneumatic cylinders.
RCS Series is the next generation electric actuator that employs a high-speed, constant thrust force motor, which maintains constant payload at speed ranging from low to high.
|
|
|
|
|
|
LINAK perfects movement in tracking systems
For solar panel tracking systems, LINAK offers several strong electric linear actuator solutions depending on your demand for force, stroke, length, and more.
For solar trackers LINAK has several solutions, but we have two main products, which we would like to recommend to you:
LA36 - Ideal Actuator for Solar Tracking systems
LA35 - Another Actuator for Solar Tracking systems
All suitable actuators for Solar Tracking systems
LA36 actuator
LA35 actuator
LA12 actuator
LA30 actuator
LA31 actuator
With LINAK you get
A specialist in electric linear actuator movement. More than 25 years of experience in the industry segment
Sales and service all over Europe, the Americas, Asia and Australia
A competent sparring partner, with great application and product know-how
A high degree of flexibility: small quantities, customised solutions
A broad product range for all demands
Non-corrosive housings and tubes
A long product life due to a robust construction
A low weight
Low current consumption solutions
Exact positioning
High IP rating 66 and 69K
|
|
The new actuator series for solar photovoltaic systems
With the newly developed Aton 1, 2 and 3 linear actuators, elero Linearantriebstechnik offers reliable drive solutions for users of solar photovoltaic systems.
User advantages
- Extremely high statistic loads compared to required dynamic loads
- Corrosion resistance against environmental influences over long periods
- Very high reliability
- Modular system, flexible integration into existing and new systems
- Electronic limit switches, adjustable throughout the whole stroke
- Integrated overload protection
- Maintenance-free throughout the whole service life
Main features
- Statistic loads up to 60,000 N
- Optional voltages:
- 24 V DC
- 230 V AC
- 400 V 3AC
- Limit switch version:
- reed sensors
- electronic, programmable limit switches
- Integrated stroke measurement systems are possible
- Electronic overload protection
- Internal reference sensors
- Self locking
|
|
Designed for ease of use and versatility, the new RoboCylinder RCP2 series features high performance, high ridigity, and high functionality.
Two new width sizes - 73mm Slider Type and 35mm Rod Type - have been added to the lineup, giving you more flexibility for your application needs. In addition, significant technological enhancements have been made in all areas, such as lower operating noise, ease of maintenance, and multi-point positioning of up to 512 points.
|
|
LAM3 linear actuator
Features
24V/12V DC motor
Aluminum Alloy housing
Low noise; compact size
Built-in limit switches (factory pre-set)
Can be equipped with potentiometer
With 10kĦ/10 turns
25% duty cycle
Ambient temperature:-15Ž-+60Ž
Protective class: IP52, IP65
Free maintenance
|
|
|
|
|
|
High Performance Electric Servoactuator – INDACT® – According to ISO 6431
ISOMOVE (1-20KN)
• Electric servoactuator by the means of a precision Ball Screw, suitable for high performance applications, featuring overall dimensions and mounting style according to ISO 6431.
• 6 different sizes (IM032, IM040, IM050, IM063, IM080, IM100).
• Wide range of Ball Screw Pitch selection for each size.
• 3 different motor drive solutions (Stepper, Brushless, Custom).
• “D” version featuring axial / direct mounted motor drive with zero-backlash coupling.
• “R” version featuring reduced / parallel mounted motor drive with zero-backlash belt gear.
• 2 different reduction ratio (1:1, 2:1 – “R” version only).
• Max Nominal Thrust up to 20KN.
• Max Linear Speed up to 1600mm/sec.
• High Efficiency mechanical transmission.
• Duty Cycle 100%.
• Grease lubricated.
Modular design according to ISO 6431 allows for maximum adaptability to the widest range of industrial high performance applications.
Wide range of standard accessories/features to ISO 6431.
Special execution on request, please contact Setec Group Italy.
|
|
LAM1 linear actuator
Features :
24/12V DC motor
Maximum push load up to 600kg,
Pull load up to 400kg
Maximum stroke up to 500mm
Low noise, smooth speed
Built-in limit switchesifactory pre-setj
10% duty cycle (10 minutes)
Ambient temperature:-26C-+65C
Protective class: IP52
Accessories: potentiometers, hall sensor,
Over-heat protection
|
|
ALI2P
ALI2P F (with integrated limit switches)
Max force: 3.500 N
Max speed: 30 mm/s
Stroke: up to 700 mm
12 – 24 - 36 Vdc
Accessories: magnetic limit switches, integrated limit switches,
rotative potentiometer, encoder, safety nut
|
|
The RACO COMPACT is designed with extremely small dimensions, although it has high linear thrust. Like the %u201Chigh performance series%u201D it also operates completely electro mechanically in a absolute trouble free manner.As a many-faceted electric cylinder for horizontal or vertical linear thrust and tension movements, it offers a smart solution for a great variety of applications with features as listed below.
Features & Benefits:
Robust industrial and compact design
Wide range of performance with many options
Suitable for applications with a high number of switches per period
Low weight for easy installation in your design structure
High reliability and positioning accuracy
Low noise for special noise requirements
Integral closed loop operation available
Maintenance-free through lifetime lubrication
|
|
This compact, lightweight yet sturdy and versatile acme actuator is a clevis to clevis mount unit, it is commonly utilized in many applications including; food service, office, home entertainment and automotive just to name a few…
Features:
Available in Strokes ~ 2 to 12 inches (custom lengths available)
20% Duty Cycle - typical (1 on / 4 off)
Factory set Limit Switches
Feedback ~ Potentiometer or Hall Effect
Load Rating ~ Up to 200 lbs. compression and tension.
0.23 to 2.2 inches per second
clevis to clevis mounting
Thermally protected motor
Lifetime lubrication
Designed for outdoor use
Available in 12 and 24v PMDC type motors
RoHS and IP65 available
|
|
L Series
Firgelli's new L series of micro linear actuators combine the best features of our existing micro actuator families into a highly flexible, configurable and compact platform.
L12
The first member of the L series, the L12, is an axial design like the LS-series, but utilizes a more powerful drive and a rectangular cross section for increased strength. But by far the most attractive feature of this actuator is the broad spectrum of configurations in which it will be available:
* 4 Stroke lengths of 10mm, 30mm, 50mm or 100mm
* 3 Force/Speed combinations with 50:1, 100:1 or 210:1 gear ratio.
* Interface options include RC Servo, Industrial servo (4-20mA or 0-5V control)), raw potentiometer position feedback, end of stroke limit switches.
* 6V or 12V operation
|
|
PQ Series
Ideal for applications requiring precise positioning, Firgelli's PQ series of micro linear actuators offer closed-loop control of the actuator's stroke position along it's full length of travel. We can also customize our standard PQ-12 to meet the requirements of your specific application.
PQ12 Compact form factor, feedback position control, 45 N maximum force. Standard configurations are PQ-12s (high-speed) and PQ-12f (high-force). Other speed/force combinations and voltages are possible by special order, minimum order quantities apply.
|
|
LS Series
The LS series of miniature linear actuators incorporate Firgelli's patent-pending integrated positional limit switches and force overload shutoff capability. The micro actuator housing is cylindrical, and available in either stainless steel or plastic. This micro linear actuator is ideally suited to cost-sensitive, high volume consumer product and robotic applications. Nothing else comes close to the LS series' combination of small size, high performance, and low cost.
LS6
6 mm diameter cylindrical micro linear actuator, 5 N maximum force.
|
|
Venture Ball Screw Actuators combine a highly efficient long life Ball Screw with a DC voltage electric motor providing a high performance ready to install electric linear drive system.
Standard strokes 4, 8, 12, 18, 24, 32, 36, and 40 inches (custom lengths available)
30% duty cycle motor rating
Available options;
Clutch
Limit switches
Reed, Hall Effect, Potentiometer and other sensor options
3000 lb static capacity / 1500 lb dynamic compression or tension
Lifetime lubrication
Designed for outdoor use
Compression or tension loads
Trunnion, Clevis, or Tube clamp mounting
High strength steel tube assembly with all-steel load support members
Efficient, long life Ball Screw
12VDC, 24VDC, 36VDC, 90VDC, or 120VDC for use with Rectified 120VAC Gearbox Design
|
|
|
|
|
|
The Eliminator HD™ Heavy Duty ball screw linear actuator provides a strong, durable, and precise linear motion actuator for industrial automation.
The Eliminator HD™ ball screw actuator converts the latest motor technology into high load, high speed, and high accuracy linear motion. Eliminator HD™ replaces hydraulic and pneumatic linear actuators, cams, levers, and linkages, with controllable motion, repeatable position, and easy adjustment.
E-DRIVE Design, Incorporated has shown consistent success in the toughest applications, e.g. High loads, high speeds, high precision, and extreme durability. Precision ball screw systems, tailored for maximum life, load and speed, provide the motion while fully enclosed, thus eliminating contamination related failures. A long bronze nose bearing provides support for the extended piston. Rugged bronze keys in opposing steel slots provide anti-rotation and counter the tangential forces created during high speed, high frequency, and high load operation.
While other actuator designs force a particular motor decision, the Eliminator HD™ is designed to suit virtually any motor, gear box, or gearhead the customer chooses to use. In-line as well as parallel offset configurations are standard with 1:1 and 2:1 synchronous gearbelt ratios available.
Dual, nonferrous dovetail switch tracks provide a simple method of placing and adjusting switches for over travel protection as well as "home" detection. Hall effect type limit switches are available.
|
|
Venture has a variety of actuators both motorized or manual suitable for Solar Dish or Solar Array applications. These are available as Acme Screw or Ball Screw type actuators in various volages and mounting configurations as noted below.
Standard strokes 4, 8, 12, 18, 24, 32, 36, 40 and 52 inches (custom lengths available)
30% duty cycle motor rating
Optional features include;
Clutch
Limit switches
Reed, Hall Effect, Potentiometer and other sensor options
3000 lb static capacity / up to 1500 lb dynamic load
Lifetime lubrication
Designed for outdoor use
Compression or tension loads
Trunnion, Clevis, or Tube clamp mounting
High strength steel tube assembly with all-steel load support members
Long Life Acme or Ball Screw
12VDC, 24VDC, 36VDC, 90VDC, or 120VDC for rectified 120VAC Gearbox Designs
|
|
SEA linear actuators series is designed for elevation tracking in photovoltaic panels installation with surface from 50 to 300 square meter.
3 sizes available, all self-locking.
Dynamic load capacity from 10 to 100 kN
Linear speeds from 1 mm/s up to 7 mm/s
Stroke lengths up to 1.500 mm
They all have self enclosed limit switches and positioning control via incremental bi-directional encoder. Available with either AC or DC motors.
|
|
KUMIRI
Miniature electrically powered cylinder for microscopic feeding
Features
Ultra-compact, small-stroke, rod-type actuator.
Ideal for applications such as electrically powering micrometer heads.
Precision lead screws are used, enabling high accuracy and high resolution.
Plastic parts are used, enabling low-cost construction.
Available with two-phase and five-phase stepping motor specifications.
|
|
MT PRECISION™ Ball screw Linear Positioner
The MT PRECISION™ is a machine tool grade ball screw linear actuator developed to provide a precise, strong, and durable linear motion solution for high accuracy positioning applications.
MT PRECISION™ is more efficient, easier to align, and provides superior control of position and velocity compared to less expensive, hydraulic or pneumatic solutions.
As an integral package, the MT PRECISION™ linear positioner actuator is less expensive and much easier to align than traditional ball screw component systems. As a sealed assembly, the MT PRECISION™ hydraulic replacement is far less susceptible to contamination and much easier to maintain than accordion style or sheet metal covers.
|
|
|
|
|
|
LTA’s are designed to fit into your existing manual stages and other opto-mechanical components as a direct replacement for manual micrometers. The LTA series features a space-saving design with the motor and lead screw side-by-side. This reduces the actuator length by 50% and minimizes the negative effects of long cantilever loads on micro-positioning equipment. The non-rotating tip prevents wear and avoids periodic motion variations which can be caused by variable contact made between a rotating tip and the mating surface.
LTA’s are designed to fit into your existing manual stages and other opto-mechanical components as a direct replacement for manual micrometers. The LTA series features a space-saving design with the motor and lead screw side-by-side. This reduces the actuator length by 50% and minimizes the negative effects of long cantilever loads on micro-positioning equipment. The non-rotating tip prevents wear and avoids periodic motion variations which can be caused by variable contact made between a rotating tip and the mating surface.
- Up to 50 mm travel in a space saving design
- Non-rotating tip improves motion smoothness and has no wear
- Exceptional position sensitivity
- Adjustable limit switch prevents damage from over-travel
- Convenient manual positioning knob
|
|
Moog provides a wide range of custom Electro-Mechanical actuators for total axis control for industrial applications. All of our actuation products have the proven reliability and precision required for high performance motion control and long service life. Available in multiple sizes and with a selection of Moog-designed and built servomotors and drive electronics, actuation products are built to meet customers requirements.
Moog’s total axis control solutions include the all-steel 887 series with the ability to accommodate peak forces of 350 kN [80,000 lbs.] It is a fully validated, tested option for the most demanding applications.
|
|
|
|
|
|
Duff-Norton manufactures electromechanical actuators, mechanical actuators (screw jacks), linear actuators, ball screw actuators, machine screw actuators, electric cylinders, rollerscrews, rotary unions (rotating joints), and air jacks.
Electromechanical Linear Actuator Products include TracMaster and LinearMaster Actuators, Packaged Controls, Modular Actuators and PowerMaster Motor Cylinders and Synchro Cylinders.
This Duff-Norton product line of actuators features load capacities ranging from 100 pounds to 100 Tons, gear or belt drives, acme screw and ball screw systems with various AC and DC input voltages. Packaged Controls operate the extend and retract function of the actuator and are available for all Duff-Norton TracMaster and LinearMaster Electromechanical Linear Actuators.
Duff-Norton Electromechanical Actuation Products are specially designed for a variety of commercial and industrial applications. These actuators are used for opening and closing, tilting and pivoting, lifting and lowering and positioning. Applications include gates, dampers, oven and processing tank doors, antennas, orthopedic tables and other medical equipment, ergonomic furniture, and agricultural equipment, etc. Custom design is also available for special applications. Electromechanical linear actuators are now being used in place of pneumatics and hydraulics when high maintenance and environmental problems (leaking hydraulic oil) are a concern.
|
|
|
|
