|
|
RCA Series is a compact RoboCylinder with 24 VAC servo motor and optical encoder.
The product has widely been accepted not only as a compact, programmable, electro-mechanical alternative to air cylinders, but also its integrated PLC function and user-friendly SEL language have made RCA Series an absolute all-rounder in the factory automation.
|
|
|
Mini-RoboCylinder of RCL series with quiet 24 VDC linear motor: ultra-smal micro cylinder and micro slider: maximum speed of 1600 mm/s, maximum acceleration/deceleration of 2 G, load capacity up to 2 kg, and stroke of 30 - 288 mm.
|
|
RoboCylinder RCS is an electric actuator with ball screw, linear guide and 230 VAC servo motor. Using the know-how obtained from manufacturing 150 thousand axis robots, while retaining the features such as high rigidity, acc/decl, and speed control, the price has been lowered to match that of rod-less pneumatic cylinders.
RCS Series is the next generation electric actuator that employs a high-speed, constant thrust force motor, which maintains constant payload at speed ranging from low to high.
|
|
Designed for ease of use and versatility, the new RoboCylinder RCP2 series features high performance, high ridigity, and high functionality.
Two new width sizes - 73mm Slider Type and 35mm Rod Type - have been added to the lineup, giving you more flexibility for your application needs. In addition, significant technological enhancements have been made in all areas, such as lower operating noise, ease of maintenance, and multi-point positioning of up to 512 points.
|
|
|
|
|
|
High Performance Electric Servoactuator – INDACT® – According to ISO 6431
ISOMOVE (1-20KN)
• Electric servoactuator by the means of a precision Ball Screw, suitable for high performance applications, featuring overall dimensions and mounting style according to ISO 6431.
• 6 different sizes (IM032, IM040, IM050, IM063, IM080, IM100).
• Wide range of Ball Screw Pitch selection for each size.
• 3 different motor drive solutions (Stepper, Brushless, Custom).
• “D” version featuring axial / direct mounted motor drive with zero-backlash coupling.
• “R” version featuring reduced / parallel mounted motor drive with zero-backlash belt gear.
• 2 different reduction ratio (1:1, 2:1 – “R” version only).
• Max Nominal Thrust up to 20KN.
• Max Linear Speed up to 1600mm/sec.
• High Efficiency mechanical transmission.
• Duty Cycle 100%.
• Grease lubricated.
Modular design according to ISO 6431 allows for maximum adaptability to the widest range of industrial high performance applications.
Wide range of standard accessories/features to ISO 6431.
Special execution on request, please contact Setec Group Italy.
|
|
DRL Series Compact Linear Actuators
The DRL Series of compact linear motion actuators use a new 5-phase stepping motor which incorporates a ball screw. These are combined with 5-phase 24 VDC microstepping drivers with photocoupler inputs for extremely precise positioning.
|
|
Motorized Cylinders with guide EZA Series
Power supply: 200 - 230 VAC or 24 VDC
Marking: CE
Dimensions: 54 (w) x 38 (h) mm
Stroke: 50 - 300 mm
Max. thrust force: 140 N
Max. speed: 600 mm/s (200 - 230 V AC-type), 600 mm/s (24 V DC-type)
Max. horizontal transportable mass: 30 kg
Max. vertical transportable mass: 14 kg
Dimensions: 74 (w) x 52,5 (h) mm
Stroke: 50 - 300 mm
Max. thrust force: 400 N
Max. speed: 600 mm/s (200 - 230 V AC-type), 600 mm/s (24 V DC-type)
Max. horizontal transportable mass: 60 kg
Max. vertical transportable mass: 30 kg
|
|
MDrive® Linear Actuator products combine leading all-in-one integrated step motor+driver technology with linear motion to deliver long life, high accuracy and unsurpassed repeatability, all in a package that is extremely compact and affordable.
MDrive Linear Actuator styles
Two (2) MDrive Linear Actuator styles are available:
* Non-captive shaft — a screw extends through the MDrive product and moves axially as the motor rotates
* External shaft — a rotating screw, integral to the MDrive motor, moves a screw-mounted nut axially
Precision rolled lead screws used with MDrive Linear Actuators are designed specifically for motion
control applications to deliver maximum life and quiet operation. Corrosion resistant and non-magnetic, screws are manufactured from premium grade stainless steel and available with optional teflon coating.
|
|
EZC-Series Motorized Cylinders
Power supply: 200 - 230 VAC or 24 VDC
Marking: CE
Dimensions: 42 (w) x 42 (h) mm
Stroke: 50 - 300 mm
Max. thrust force: 140 N
Max. speed: 600 mm/s (200 - 230 V AC-type), 600 mm/s (24 V DC-type)
Max. horizontal transportable mass: 30 kg
Max. vertical transportable mass: 14 kg
Dimensions: 60 (w) x 60 (h) mm
Stroke: 50 - 300 mm
Max. thrust force: 400 N
Max. speed: 600 mm/s (200 - 230 V AC-type), 600 mm/s (24 V DC-type)
Max. horizontal transportable mass: 60 kg
Max. vertical transportable mass: 30 kg
|
|
|
Rod type, single-axis robot YMS series features in low cost and yet high performance. Its use in combination with the ERCD controller which has an additional pulse train input function widens versatile application range.
|
|
|
|
|
|
Linear Motor Table LT is a direct drive positioning table featuring a low sectional height and light weight. An AC linear servo motor and an optical linear scale are compactly integrated in the moving table and bed made of aluminum alloy, and miniature type linear motion rolling guides IKO Linear Way L are assembled in the table guide section. Linear Motor Table LT, adopting a C-shaped magnet yoke arranged in-between two stator magnets together with a moving coil, provides large driving force and achieves high speed and quick response positioning. Linear Motor Table LT is most suitable for applications requiring high speed operation such as semi-conductor and liquid crystal related equipment, measuring instruments, assembling systems, material transfer equipment.
Features:
Maximum thrust 900N for high thrust series
Compactness and high thrust were pursued by adopting miniature optical linear scale and C-shaped magnet yoke. Maximum thrust 900N is achieved by high-density coil arrangement. Also, compact series output 450N with the total height only 40mm
High acceleration and high response with a smooth motion
High acceleration and high response positioning can be made due to super light weight moving table and high thrust. The table can travel with a smooth motion by using C-shaped magnet yoke which cancels out magnet forces and eliminates the unnecessary load on the linear motion rolling guides. Also, C-Sleeve Linear Way, long term maintenance free type, is adopted for their linear motion rolling guides.
High resting stability and speed stability
High resting stability is achieved by the latest servo technology. This linear motor can be used as a high accurate positioning device. Also, high speed stability is achieved.
|
|
The SR stage is a compact, small footprint, open type positioning stage. It is used in closed loop positioning applications that require high speed and high accelerations of lighter loads.
The ironless core coil assembly has no magnetic attractive force to the stationary magnet assembly, which reduces the load on and increases life of the bearing system.
The low overall weight of the stage makes it ideal as a Y axis (top axis) in a multi-axis system. The lower moving mass of the stage allows for much higher accelerations of light payloads.
The cable carrier is oversized to allow for passage of customer payload cables and hoses. The back of the cable carrier can be easily removed and reattached to route through additional cables.
|
|
SKF positioning systems designed a series of compact cross tables that are driven with ironless linearmotors. High guiding / positioning accuracy and high dynamic lead to a perfect solution for wafer measurement. The free area through the whole unit optimizes the mounting position of the measurement device.
|
|
|
|
|
|
- Smallest Linear Slide with High-Speed Linear Motor Drive
- 20 mm Travel Range
- Velocity to 500 mm/s
- Acceleration to 20 g
- Resolution to 50 nm
- Self-Locking
- XY-Combinations Available
- 20,000 h MTBF
- Vacuum Versions to 10-7 hPa
PILine® - Ultimate Motion in the Smallest Package:
PILine® M-661- and M-662-series piezo motor linear slides are the smallest high-speed piezo-motor-driven translation stages currently available on the market.
Working Principle:
M-661 and M-662 linear stages have a new, patented, ultrasonic drive developed by PI. The highly compact, integrated P-661 piezomotor drive can provide accelerations of up to 20 g and velocities of 500 mm/s and more, together with high resolution and holding force. Because the ceramic stator is pressed against a slider of the stage, piezomotors resist motion with an intrinsic holding force when the stage is at rest. The result is very high position stability without the heat dissipation common with conventional linear motors. Furthermore, there are no gears, leadscrews or other mechanical components to contribute play or backlash.
|
|
| ... products without technical information |
| |
Maximum speed of 2500 mm/s, maximum acceleration/deceleration of 3 G,load capacity of 120 kg, and maximum stroke of 4 m.
|
|
|
Pico series robots are single axis robots using a program-less controller PRC. While priced at a low level, each robot has various functions such as thrust control and zone signal output. It is also designed for great ease of use.
|
|
|
This driving unit, although compact in size, has a high thrusting force. The moving coil catches the magnetic flux generated by the magnets arranged in the magnet shaft and converts it into the thrusting force efficiently. As this structure requires no frame, it is compact and light weight.
|
|
Demands for higher speed, enhanced quality and less cost are increasing
more than ever. How to meet these demands quickly is the task
expected of manufacturers now and in the future.
YAMAHA PHASER series is a completely new line up of
high performance single axis robots in which the cost
factor and performance are combined in a desirable
way."YAMAHA PHASER series"is the key word
that in creating the manufacture scene of the
next generation with new value concepts.
|
|
| ... products without technical information |
| |
saia linear stepper motor
Dimensions Ø 55 x 58 mm
Characteristics
* integrated non-rotational threaded spindle
* thread pitch 1.5 mm
* resolution: 31 µm / step
Stroke 55 mm
Force 400 N @ 25 % duty cycle
Step angle 7.5°
Speed 6.25 mm/s @200 Hz
|
|
saia linear stepper motor
Dimensions (mm) Ø 36x36
Travel (mm) 8, 13, 45, 56
Travel per step (mm) 0.033
Speed by 200 Hz (mm/s) 6.67
Resistance per winding
bipolar/unipolar 6 V (Ohm) 18.5/28
12 V (Ohm) 100/120
24 V (Ohm) 460/500
Max force (N) 35
|
|
Saia-motor for positioning, opening/closing or dosing
The new 20mm UAL linear actuator is a small powerhouse. With a resolution of 21 µm per full step, it has a constant force of up to 30 N over the full travel range of 15mm. The compact housing, with a 20mm external diameter, is supported by a direct cable outlet.
The design of the actuator can be engi-neered as a bipolar or unipolar stepper motor, as well as a synchronous motor (max. 50 Vac.). The flexible manufactur-ing of the actuator allows a customer-specific mounting flange and a tailor-made layout design to meet all customer needs. Therefore, the linear actuator has the best preconditions to be used in posi-tioning units, valves and dosing pumps, for example in medical technology or in locking systems.
|
|
|
Available in DC stepper or AC synchronous, Hurst linear actuators provide a conversion of rotary motion to linear motion in can-stack ermanent magnet motors. By passing a 1/4 threaded rod through a hollow rotor hub with mating threads, the normal rotary motion is converted to linear movement for positioning in either direction. Some common application include: X - Y tables, small elevators, height adjustment of sampling tables, general purpose linear positioning.
|
|
CNC swiss-type automatic lathes
The SPEED linear series, is the flexible, and highly productive, automatic lathe of the future. An efficient combination made from years of experience and innovative know-how, makes this completely redesigned series, truly fascinating. The completely user-friendly work area allows machining with up to 3 tools in simultaneous operation, this results in maximum productivity for machining simple parts, or more complex workpieces, that have higher requirements. These features make the SPEED linear series ideally-suited for applications in industries such as hydraulics, shaft, automobile, electronics and medicine. For the first time, the successful linear technology is available for a complete series, guaranteeing the highest precision and processing safety.
|
|
Type
2LSB10-
Series
Linear heads (LS-Series)
Technical data
Type
2LSB10-
Frame size [mm]
60
Max. speed [mm/s]
10
Rack stroke [mm]
100, 200, 300, 400, 500, 600, 700, 800
Stroke direction
horizontal
RoHS-compliant
yes
Transportable mass (horizontal) [kg]
30
Transportable mass (vertical) [kg]
|
|
Power supply: 200 - 230 V AC or 24 V DC
Marking: CE
Dimensions: 54 (w) x 50 (h) mm
Stroke: 50 - 700 mm
Max. thrust force: 86 N
Max. speed: 800 mm/s (200 - 230 V AC-type), 600 mm/s (24 V DC-type)
Max. horizontal transportable mass: 15 kg
Max. vertical transportable mass: 7 kg
Dimensions: 74 (w) x 50 (h) mm
Stroke: 50 - 700 mm
Max. thrust force: 140 N
Max. speed: 800 mm/s (200 - 230 V AC-type), 600 mm/s (24 V DC-type)
Max. horizontal transportable mass: 30 kg
Max. vertical transportable mass: 14 kg
Dimensions: 74 (w) x 66.5 (h) mm
Stroke: 50 - 850 mm
Max. thrust force: 369 N
Max. speed: 800 mm/s (200 - 230 V AC-type), 600 mm/s (24 V DC-type)
Max. horizontal transportable mass: 60 kg
Max. vertical transportable mass: 30 kg
|
|
|
|
see the results for the following category : 
