|
|
No cogging or preferred rotor position
No iron losses
Extremely low current consumption
Extremely light and compact
Smooth and accurate speed, position, and torque control
Electronic commutation for extremely long operational lifetime
High precision gearboxes available in all sizes
Control electronics available for all motor series
Available as linear actuator
Custom systems available from design to production
|
|
No cogging or preferred rotor position
No iron losses
Extremely low current consumption
Low audible and electrical noise
Extremely light and compact
Smooth and accurate speed, position, and torque control
Low vibration
Speeds up to 100,000 rpm
Electronic commutation for extremely long operational lifetime
High precision gearboxes available in all sizes
Feedback components available in all sizes
Control electronics available for all motor series
Custom systems available from design to production
|
|
No cogging or preferred rotor position
No hysteresis or eddy current losses
Extremely low current consumption
Ultra flat dimensions
Extremely light and compact
Smooth and accurate speed control
Speeds up to 60,000 rpm
High power rare earth magnets
Electronic commutation for extremely long operational lifetime
High precision gearboxes available
Control electronics available for all motor series
Custom systems available from design to production
Autoclavable and vacuum rated motors available
|
|
|
Canon Precision's brushless motors are compact in size and provide high output power. Two types are offered; an outer rotor type with high rotational stability and an inner rotor type with quick response. Inner rotor types can be equipped with reduction gears and encoders. Various custom options can be incorporated to fit your applications.
|
|
• Fast speed up to 50,000 rpm and up to 30W of continuous output power
• Ultra compact. At 32 mm (1.26”) diameter by 11.7 mm (0.46”) length, the nuvoDisc is over 75% shorter and over 90% lighter than typical competitor motors.
• With a weight of only 26g, applications benefit from being lightweight.
• High efficiency. Reduces power supply requirements by drawing less current,
resulting in less generated heat.
• Low vibration. High speed slotless design provides characteristic smooth operation.
*A slotted design is also available on request when detent torque is needed, for applications such as Damper Control.
|
|
* Considerable longer life (no brush wear)
* Higher efficiency, reliability and controllability
* Reduced audible noise
* Reduction of EMI & RF emissions
* Higher power to size ratio
* Perfect for installation in restricted areas, such as:
o Environments sensitive to interference
o Battery powered equipment
o Clean room environments
|
|
FHA-C mini Series Servo Actuators, combining precision Harmonic Drive gearing with AC servo motors, offer unique features unsurpassed by conventionally geared drives. Used in highly demanding industrial servo systems they provide precision motion control and high torque capacity in a very compact package.
Sine-commutated AC servo motors provide smooth torque without the brush wear or commutation limit associates with DC servo actuators. Encoder, mounted directly onto the motor shaft, provide position feedback information. The backlash-free Harmonic Drive gear is provided with grease lubrication specially developed to ensure minimum maintenance requirements and long service life.
The fully digital SC-610 Series Controllers are available for the control of these Servo Actuators. A menu driven setup software running under MS-Windows allows a comfortable parameter optimisation and system diagnosis.
|
|
No cogging or preferred rotor position
No iron losses
Extremely low current consumption
Extremely light and compact
Smooth and accurate speed, position, and torque control
Electronic commutation for extremely long operational lifetime
High precision gearboxes available in all sizes
Control electronics available for all motor series
Available as linear actuator
Custom systems available from design to production
|
|
We are pleased to introduce the new BLDC brushless micro gearmotors. This new series completes Intecnos range of DC micro gearmotors and offers ideal solutions for sectors such as industrial automation, automatic doors and windows, vending and many others.
The BLDC motors from the BL series are available in 3 sizes (torque from 0,05 Nm to 0,43 Nm) and they can be supplied with an integrated (IE version) or external drive. They are compact and low-cost being equipped with Hall sensors. These motors have a low voltage 24V, which optmises safety in the workplace, particularly in applications where the worker can be in direct contact with the motor.
To complete the gearmotor, we would use the reliable micro planetary gearbox from our standard series.
Gearmotors made up of BL motors and LN (low noise) gearboxes are particularly suitable for applications in the medical field and for applications that require a controlled movement.
|
|
No cogging or preferred rotor position
No hysteresis or eddy current losses
Extremely low current consumption
Ultra flat dimensions
Extremely light and compact
Smooth and accurate speed control
Speeds up to 60,000 rpm
High power rare earth magnets
Electronic commutation for extremely long operational lifetime
High precision gearboxes available
Control electronics available for all motor series
Custom systems available from design to production
Autoclavable and vacuum rated motors available
|
|
| ... products without technical information |
| |
RIPPED Ironcore Linear Motor for high force applications
Patent Pending ultrasmooth anticog technology
Three series of motors (R7, R10, R16) with 3 different coil lengths
Peak forces to 9342N (2100lb), Continuous forces to 2348N (528lb)
Connector modules allow quick and easy installation
Internal thermal cutout switch protects coil
Digital HED''s, Home & +/-Limit Sensors incorporated into Connector Module
Modular magnet tracks with flush mounted magnet separators
Built in cable strain relief
Two lengths of modular magnet tracks allow unlimited length of travel
|
|
The new generation of linear motors – one-of-a-kind worldwide – combines extremely high continuous and maximum force with compact construction and the lowest possible force ripple in a single series.
Image Desc
click to enlarge
Image Desc MLP/MLS Series – Synchronous Linear Motors
Highly-dynamic and precise
IndraDyn L is based on the continued development of Rexroth's industry-proven linear motor technology. Select from real-world sizes and lengths:
* Primary units with standard stainless steel housing and integrated liquid cooling
* Optional thermal-encapsulation for the most stringent temperature stability requirements
* Secondary units in 3 lengths, with stainless steel cover plate
|
|
|
Aerotech's "U-channel" brushless linear servomotors have proven ideal for robots, actuators, tables/stages, fiberoptics/photonics alignment and positioning, assembly, machine tools, semiconductor equipment, electronic manufacturing, vision systems, and in many other industrial automation applications. Aerotech linear motors are direct drive and consist of a noncontacting forcer coil and "U-channel" rare-earth magnet track. This design eliminates backlash, windup, wear, and maintenance issues associated with ball screw, belt, and rack and pinion based motion control and positioning systems. The noncontact design of the forcer and magnet track results in a maintenance-free system.
|
|
|
|
|
|
The 3 phase brushless (or AC servo) linear motor is ideal for high force, long stroke, closed loop servo, and linear motion applications. They can be used at speeds up to 240 in / sec [6 m / sec]. They are capable of very precise position, velocity and acceleration control when coupled with a linear encoder.
The 3-phase coil assembly can be commutated trapezoidally using optional Hall Effects or sinusoidally using software commutation in conjunction with the appropriate motion controller and sinusoidal amplifier.
The short laminated moving coil assembly moves over the top of a magnet assembly. A customer supplied bearing system is required to guide the moving coil assembly and to maintain a .030" [0.75 mm] clearance between the coil and the magnet assembly.
There is a large magnetic attractive force between the coil and magnet assembly. The bearing system must be able to withstand this force in addition to whatever payload is being carried.
The power to the motor (from a customer supplied PWM 3 phase brushless servo amplifier) is supplied to the moving coil via a power cable.
The motors are available in 6 different widths and 4 different coil assembly lengths.
Advantages:
* Very low cogging
* High speed and accelerations of heavy payloads
* Capable of high forces
* Uses standard 3 phase brushless amplifier
|
|
Linear synchronous motor series LSM
The linear synchronous motors Ruchservomotor JV are guarantee:
high force density in compact dimensions(peak linear force up to 7600N),
high velocity(up to 5m/s)
and accelerations (up to 14G *).
Linear Synchronous Symmetry Motors LSSM
The linear synchronous motors Ruchservomotor JV because of special design features are guarantee high force dencity in compact dimensions(peak linear force up to 7600N), high velocity(up to 5m/s) and accelerations(up to 14G at user payload=0kg).
Multiples forcers can be operated independently on one magnet way. The motors can be join in serially or in parallel for obtaining higher linear force.
|
|
SL2 series
The SL2 synchronous linear motor with convection cooling is practically maintenance-free and offers maximum reliability and availability, high control quality, speed and accuracy.
SL2 synchronous linear motors are available in three models for speed classes 1, 3 and 6 m/s: SL2 Basic, SL2 Advance System and SL2 Power System. For longer travel distances, secondaries are available in different lengths and can be easily lined up with one another. The SL2 Advance System features a motor cooling unit, which provides even better cooling than SL2 Basic. A forced-air cooling fan gives the SL2 Power System a further power boost.
Your advantages
- SL2 motors save time during project planning
- Precise, reliable and safe at any speed
- Virtually maintenance-free
|
|
Features specific for this product line
> direct electric drive
> high speed
> without reduction gear, no play at direction reversal
> no rotor losses
> with NdFeB magnets
Features of Oswald motors
>compact, robust, high force density
>maintenance-free or low maintenance
>low inertia, dynamical
>long life
>Made in Germany
Technical spezification
force at continuous duty 100 - 10.000 N
speed up to 10 m/s
stroke modular, arbitrary
cooling air or fluid
protection class IP54 (primary, secondary windings)
|
|
|
|
|
|
Baumüller linear motors have been designed for use as direct drives with synchronous motors. Customized motor concepts can be created using a modular system, meaning that Baumüller linear motors can achieve maximum thrust forces of up to 14,750 N.
Baumüller linear motors are synchronous motors. They consist of a primary with a wound lamination stack and a secondary with permanent magnets (magnetic strip). The primary is laminated with carbon fiber. This allows Baumüller linear motors to achieve consistently high stiffness and maximum continuous force, thanks to their improved capacity for heat dissipation.
LSA - The plug & play solution
LSE 10 - The customized solution
LSC - The ironless solution
LSE 50-90 - The solution for logistics applications
The scope of products and services provided is not merely limited to linear motor components. On the contrary, Baumüller offers the user a plug & play solution with clearly defined interfaces that can be immediately connected to his machine, in the form of a very compact and flexibly designed complete linear axis, LSA, which is essentially comprised of linear components, a guidance system, a mechanical structure, and a length measuring system.
|
|
|
|
|
|
Linear Brushless Motors Series DM
Key Features:
· Symmetric forcer
· Dual magnet track linear motor
· Steel core for high force density
· Lo-Cog for smooth motion
· Built-in thermal sensors
· Hall-effect sensors
· Water cooling option
· Modular magnet track for unlimited travel
· Magnets covered by stainless steel strip
Iron core linear motor DM Series is designed to provide the highest force density in the linear motor applications. Unlike conventional iron core motors, DM motors have dual magnet track to balance magnetic attraction forces and to remove any forcer magnetic preload from the bearings. This feature provides for quite operation with smaller linear bearings without concern for bearing life. Linear motor magnetic structure of the forcer also optimized to provide low cogging. Forcer have thermal sensors in a compact structure as well as Hall-effect sensors and can be provided with water cooling option. These motors are ideal in applications to move large payloads without effecting bearing life. Magnet tracks are stackable for any travel length.
|
|
The new generation of linear motors – one-of-a-kind worldwide – combines extremely high continuous and maximum force with compact construction and the lowest possible force ripple in a single series.
MLP/MLS Series – Synchronous Linear Motors
Highly-dynamic and precise
IndraDyn L is based on the continued development of Rexroth's industry-proven linear motor technology. Select from real-world sizes and lengths:
* Primary units with standard stainless steel housing and integrated liquid cooling
* Optional thermal-encapsulation for the most stringent temperature stability requirements
* Secondary units in 3 lengths, with stainless steel cover plate
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
