|
|
Construction
Mechanical protection: IP55
Insulation: Class F
Temperature rise: 80 K
Frames: are in cast iron, (except frames 180 - 225 which are in steel)
Terminal boxes: are in cast iron
Endshields/flanges: are in cast iron
Fans:
- Up to frame size 315 are in polypropylene, (except frames 180 - 225 which are in steel)
- On frames 355 and above, are in polypropylene or aluminium alloy.
Fan cover: in cast iron or pressed steel, capable to withstand impact of 7 Joule.
Finish: Industrial paint system, standard color RAL 5010.
Motor series BFGC (IIC): kW RPM
0.37 up to 450 kW 3000 RPM
0.25 up to 500 kW 1500 RPM
0.18 up to 450 kW 1000 RPM
0.12 up to 400 kW 750 RPM
Motor series BFG (IIB): kW RPM
250 up to 710 kW 3000 RPM
250 up to 900 kW 1500 RPM
200 up to 710 kW 1000 RPM
160 up to 630 kW 750 RPM
|
|
Three-phase short circuit asynchronous motor, frame-cooled.
- high efficiency reserve
- high switching frequency
- Solid construction and high reliability
- quiet and maintenance-free
- different mounting types to choose
- suitable for operation of a frequency converter
|
|
Standard type of motors range from 1/8HP to 20HP to met differing requirements, suited to individual needs.
Economical and general purpose-driproof type (EFOUP).
Rugged under most severe operating conditions-totally enclosed fan, cooled type (TFO).
Compactly designed equipment-flange mounted, totally enclosed, fan-cooled type (VTFO).
Internationally interchange ability/ Original "Hitachi WR grease".
High efficiency fan/ Low noise/ Low vibration/ Safety-assured design.
|
|
Y Series (IP23) Three-Phase Induction Motor
General:
The Y series (IP23) motor is a three-phase protection cage induction motor for common usage.
Features:
* Radial flow draft type, good heat dissipation performance, low temperature rise and a long life cycle
* High quality cast iron base and end-shell ensure better cooling performance, good dependence and a long life cycle
* Large stall torque
* High efficiency
* Small noise, slight vibration, reliable operation and easy maintenance
* Fine construction and appearance
* Could be manufactured to customer’s special needs under different voltages, double voltages, special frequency, special extension, biaxial extension, humid tropics and dry tropics etc
Applications:
The Y series (IP23) can be widely used in paper-making equipment, compressors, fans and pumps. It is especially suitable for equipment working in in-door environments like refrigerators.
|
|
Standard three-phase motors with squirrel cage rotor
Design industrial motor with aluminium housing
Main applications water and vacuum pumps, fans, compressors, drive systems, transmissions
Special applications machine tools, garden equipment, vehicles, elevator doors, food machines, extruders
Performance range 0,06 - 37 kW
Size 56 - 200
Standard three-phase motors with squirrel cage rotor
Design industrial motor with cast iron housing
Main applications chemical industry, ship and marine engineering, use under difficult environmental and general conditions
Special applications agricultural and construction machinery, hydraulic systems, mixing machines, stone processing equipment, separators
Performance range 37 - 315 kW
Size 225 - 355
|
|
- Considerably more power from smaller construction volume
- Optimised heat elimination by means of ventilation ducts
- Minimum lossed for maximum efficiency
- Energy saving over standard motors
- IP 54 / Insulation Class F
- Compatible with all Groschopp gearboxes
- Can be combined in principle with gearbox of other manufacturers
- Options available, e. g. brakes, sensor systems.
|
|
|
The standard motors in the designs B3, B5, B14 can be used with frequency inverters, also available as motors with integrated inverters.
|
|
Properties of the three-phase AC motors
The long, slim three-phase AC motors made of extruded aluminium profile are optimally attuned to the CDA3000 inverter and the CDD3000 servocontroller. They usually construct a size smaller than standard IEC motors (with the same output in mode S1) and are dynamic as asynchronous servomotors.
What customizations are possible for three-phase AC motors?
* Protection up to IP66
* Special voltage and special rotation speed
* Specific connection technique
* Different design
* Cast motors
* Special shafts
* Flange adaption
|
|
Type Code: AECD TOP
Standard 3-phase induction motors
TEAAC, Squirrel Cage
Output 350~1000HP (260 ~750 KW)
Pole (Speed) 2~ 10
Voltage 380V, 415V, 460V, 660V
Frequency (Hz) 50
Frame Size 400A~560C
Protection Enclosure IP 44
Type Code: AEEA / AEVA /AEEACF / AEEAFB / AEEAHD TOP$Standard 3-phase Induction Motors
TEFC T-Frame Design B or C
Output 3/4 ~800HP
Pole (Speed) 2 ~ 12
Voltage 230/460V, 460V, 575V
Frequency (Hz) 60
Frame Size 143T~449T
~ 6810
Protection Enclosure IP 44
|
|
Voltage: 230/400 V
Moreover we supply Three Phase Motors for all voltages up to 575 V.
Frequency: 50 or 60 Hz
Power: 60 - 1100 Watt
Number of Poles 2-pole, 4-pole
Other numbers and pole-changing version on request
Type of protection: IP 54
|
|
|
|
|
|
• Totally Enclosed Fan Cooled
• Energy, and Inverter Duty Types FUT, UTE, UTI
• 1.25 Service Factor
• 1/4 through 30 horsepower
3600, 1800, 1200 rpm
200, 208-230/460 & 575 volt
• Removable Feet on 182 frame and up
• ALLGUARD® Motor Quality System
U.S. Motor’s Unimount 125® is a totally enclosed fan cooled motor with a 1.25 service factor. These TEFC motors meet standard NEMA requirements including 40°C ambient conditions, class F insulation (with class B temperature rise), NEMA Design B and usable up to 3,300 feet above sea level. The Unimount has an aluminum alloy extruded frame that improves heat dissipation for cool operation and long life (180 frame and larger). Die cast aluminum brackets have steel or cast iron bearing cavity inserts to ensure reliable performance under severe load applications. The 56 and 140 frames are rolled steel.
Unimount motors offer the widest range of electrical and mechanical features of any motor on the market today. The diagonally split conduit box is oversized compared to NEMA standards. Other mechanical
features include a rugged motor base which is removable on 180 frame and larger to allow conversion to a footless configuration.
|
|
Three-phase motor up to 550 W
Heidolph three-phase motors are asynchronous squirrel cage motors with delta or star connection. They are characterised by a high start torque which is considerable higher than the nominal torque. The three-phase motors run smoothly and quietly, are robust, maintenance-free and feature a long life-span.
|
|
Asynchronous motors for test stands
Features specific for this product line
> high maximum speed
> wide range of field weakening
> very low vibration levels
> standard configuration with hybrid bearings
Features of Oswald motors
>compact, robust, high force density
>maintenance-free or low maintenance
>low inertia, dynamical
>long life
>Made in Germany
Technical spezifications
torque at S1 duty class 50 - 6500 Nm
power 100 - 1000 kW
speed up to 20.000 rpm
cooling air and fluid
protection class IP23 - IP54
We will be happy to adapt the electrical and mechanical design to your specific requirements.
|
|
|
|
|
|
OSWALD asynchronous servomotors series QD are particularly suitable when heavy demands are required with respect to high speed range, dynamics, running smoothness and operational reliability.
OSWALD 4-pole QD motors in the power range from 1 kW to 150 kW have quadratic frames and are characterized by a high power density with a small space requirement. They are supplied in IP 54 to IP 65 enclosures
as well as in all relevant mountings (B3, B5, V1, etc.).
The standard version of the totally enclosed motor is cooled by an external axial blower. A high degree of reliability and low maintenance requirements result from the use of prelubricated bearings as well as stable housing and bearing plates.
The attachment of an incremental encoder or a resolver is designed, allowing field oriented speed control with a frequency converter. Motors without encoders can also be operated excellently through the use of a
frequency converter control.
The QD series is the result of many years of experience
with frequency controlled 3-phase squirrel cage
motors.
|
|
N-compact Standardline
N-compact Standardline motors are favorably priced and standardized low-voltage motors. They are based on the technology of our well-proven N-compact series that, for sophisticated applications, already set standards for low-voltage motors.
4-pole N-compact Standardline motors cover a power range from 250 to 500 kW.
|
|
|
|
|
|
Owing to overlapping design and engineering we are able to provide customer-oriented drive system solutions, especially in the field of plant construction in the classical sense of the word. We are your competent partner in the paper, cement, and chemical industries as well as in the fields of materials handling, hydropower technology, etc. Our extensive product portfolio ranges from low-voltage engines to high-voltage engines, surface-cooled air-air- to air-water-cooled engines.
From EX engines, EX generators and asynchronous engines to slip-ring rotors in a power range between 200 kW and 25 MW (frame size ranging from 355 to 1,000) and in a voltage range between 400 V and 13.8 kV (20 kV).Higher power range, frame size and voltage are available on demand. We design and develop European quality products with state-of-the-art manufacturing technologies. References from all over the world are proof of our flexibility and expertise.
AC three-phase motors of ELIN EBG Motoren GmbH are mostly used for industrial applications, for example in steel mills, cement plants, paper mills or chemical plants as well as power plants and for various compressors.
The scope of supply of our company for AC three-phase motors is located between 200 and 25.000 kW. We offer all common cooling and protection methods.
|
|
|
|
|
|
AC induction hoist and traction motors offer higher efficiency and smaller size than DC sepex or series wound motors with the same output and thermal performance.
They are without commutator and brushes and require no maintenance. With this type of motor, acceleration and braking torque at higher speeds are not limited by the commutator, which results in shorter stopping distances without the use of a mechanical brake. They also offer longer battery life and more precise control.
F e a t u r e s
• High specific power
• Low performance sensivity to motor temperature (no permanent magnets)
• Small size
• Low noise operation
• Long life maintenance free operation
• Excellent dynamic behavior
• Precise control
• EMC compatible
D e s i g n
• Three phase four pole induction motor
• Aluminium squirrel cage rotor
• Sensorbearing and other separate encoder options available
• UL design available on request
• Available in EE version
• High quality thermal resistant materials
• Free of asbestos, lead cadmium, beryllium and ammonia
|
|
Y Series (IP44) Three-Phase Induction Motor
General:
The Y series (IP44) motor is an enclosed type of squirrel cage three-phase induction motor with self-fan cooling for general applications.
Features:
* High efficiency, low power consumption
* Small noise, slight vibration
* Good dependency
* Terminal box may be located in several positions to accommodate special needs
* Could be manufactured to customer’s special needs to different voltages (including 220V, 220/380V, 380/660V, 415V), F class insulation, a higher protection grade (IP54, IP55), double shaft extensions, taper shaft extension, and humid tropical type etc.
Applications:
The Y series (IP44) motor can be widely used in equipment which does not have special requirements for the motor's performance, such as machine tools, fans and pumps
|
|
Y2 Series (IP54) Three-Phase Induction Motor
General:
The Y2 series (IP54) motor is a squirrel cage rotor three-phase induction motor with self fan cooling for common usage. It is the improved version of the Y series (IP44) and can be easily substituted.
Features:
* High efficiency and low power consumption
* Small noise and slight vibration
* Large small torque
* Good dependency
* Low weight and fine appearance
* Internationally transferable
* Top mounted terminal box convenient for installation
* Different voltages (such as 220V, 220V/380V, 660V, 380V/660V, 415V, 1140V ), a higher protection grade (IP55) and double shaft extensions, taper shaft extensions, humid tropical type, and other special requirements may also be supplied as well.
Applications:
The Y2 series (IP54) can be widely used in equipment which does not have a special requirement for the motor's performance, such as machine tools, fans and pumps.
|
|
Series A2../ARC 112 to 355, for frequency converter operation, ARB 22 to 65, heavy version for mains operation
Output range 0.4 kW to 500 kW (ARB series from 0.4 to 5.5) Acceleration torques 40 Nm to 3,000 Nm
Speeds 3,000; 1,500; 1,000; 750; 600; 500 rpm, lower speeds available on request
|
|
GE Motors Value Line vertical hollow shaft (VHS) WPI product line is a high thrust design intended for deep-well pump applications. The Value Line product offering ranges from 5 - 300 horsepower and is compatible with a variable speed drive.
Mechanical
- Motor type: Three phase induction
- Cast Iron frame and endshield
- Guide bearings on frames 213-449 are supplied with grease lubricated ball bearings
- Rotor: cast aluminum
- Ground terminal inside conduit box
- Enclosure: WPI with improved rodent protection
Electrical
- Voltage 230/460 and 460+/- 10%
- HP range: 5 through 300
- Insulation system designed to meet MG1-31 at 460 volts for IGBT drive compatibility
- RPM 3600, 1800, 1200 at 60Hz
|
|
Type Code: AEBH
High Thrust Hollow Shaft Pump Motors
Low Voltage, Vertical type, Squirrel Cage
Output 30 ~ 185 KW
Pole (Speed) 2~ 8
Voltage 380V, 400V, 415V, 440V
Frequency (Hz) 50
Frame Size 250S ~ 315M
Protection Enclosure IPW44
Design Standards: BS 4999, AS 1360, NEMA MG-1, MG-13
Environment: non-hazardous
Stator insulation: Class F Insulation, 80¢J rise at SF 1.0
|
|
|
|
|
|
For use on turbine, mix flow and propeller pumps
3 - 4000 Horsepower
3600 through 514 rpm
Low and medium voltage through 6900 volts
Three phase, 60 and 50 hertz
Three efficiency levels - standard
efficient, energy efficient
and premium efficient
Product Overview
Our Weather Protected Type I (WPI)
Holloshaftâ motors are constructed to minimize the entrance of rain, snow and airborne particles. Our enclosures exceed NEMA requirements because U.S. Motors has built in the extra protection needed for rugged outdoor applications. The ventilation system is designed to provide optimum cooling to the thrust bearing and electrical components and is available in all motor sizes.
These motors allow for easy pump impeller adjustment and maintain alignment of pump base to motor drive clutches. Steady bushings are available to give the mechanical characteristics of a solid shaft motor.
In our design concept, the high thrust vertical motor is arranged into four functional zones - the top zone is small and light to assure simplified access to the coupling area and inspection of the thrust bearing. Below this is the coupling area and the essential elements of thrust bearings with a large weather protected air intake to cool the motor and thrust bearing.
Next, the center, or winding section, develops the driving torque and includes the latest Insulife insulation systems. And below, the mounting base is compact and designed for momentary upthrust of the pump.
The benefit of the four zone design is a motor which is more easily installed and serviced and which allow operator protection and convenience.
|
|
The asynchronous motors of the FQD-series are best suited
for extruding and injection moulding machines, machine
tools, vehicle drives, testing systems, packaging machines,
extruder, textile machines, wire drawing mills, printing
machines, hydro-electric power plants, etc...
|
|
For simple and rugged pump operation, Micropump AC motors are the choice you can rely on. The drives are supplied with a driving hub and adapter plate that allow a wide-rand of magnetically driven gear pumps to be fitted using just two fixing screws. The result is fast and simple installation. The motors are available in either single- or three-phase configurations. IP 55 motor enclosure ensures protection of internal parts against dust and water.
Performance Summary
- IEC 56, 63, or 71 frame sizes
- Available power 0.09, 0.24, 0.25, 0.37, or 0.73 kW
- Torque from 0.31 to 1.7 Nm
- 1340, 1380, 1400, 2680, 2830, 2880, or 2900 rpm ratings
- Voltage 220/240 230/400 or 255/440
|
|
MS series aluminium housing three-phase asynchronous motors, with latest design in entirety, are made of selected quality and conform to the IEC standard.
MS motors have good performance, safety and reliable operation, nice appearance, and can be maintained very conveniently, while with low noises, little vibration and at the same time light weight and simple construction. These series motors can be used for general drive.
|
|
The broad AMK motor program offers you the right motor for every application: High-torque motors, hollow-shaft motors, geared motors, integrated motors as well as customer-specific motors. The motors are available in a variety of power classes, types of construction, and cooling types. They excel by high reliability, high dynamics, small dimensions, low moments of inertia, and largely no maintenance. You can implement standard as well as high-end solutions.
Asynchronous servo motors:
- Asynchronous servo motors of series DH
- Asynchronous servo motors of series DW (liquid-cooled)
- Asynchronous servo motors of series DV
|
|
MY Series aluminium housing single-phase capacitor-run asynchronous motors, with latest design in entirely, are made of selected quality materials and conform to the IEC standard.
MY motors have good performance, safety and reliable operation, nice appearance, and can be maintained very conveniently, while with low noises, little vibration and at the same time of light weight and simple construction. The multiple of starting torque is 0.3-0.7.
These series motors are suitable for the occasion where there requirement of starting torque is low and long-term continuous working, such as home electric appliances, pumps, fans and recording meters, etc...
|
|
Single-stage AC Motor, Used in Hand Dryer
Model Number:ND-B
Key Specifications/Special Features:
* Application: vacuum cleaners, hand dryer
* Stage: single
* Voltage: 100 to 240V (50 to 60Hz)
* Input power: 200W to 1,800W
* Insulation class: A, E, B and F
* Maximum vacuum: 26kPa
* Maximum airflow: 3.5m3/minute
* Maximum efficiency: 36%
* Dimensions: 130mm
* Height: 114, 116 and 118mm
* Outer packing: 12 pieces/carton
* Loading volume:
800 carton/9,600 pieces per 20-foot
1,534 carton/18,408 pieces per 40-foot container
|
|
Asynchronous Threephase Motors:
- 2 poles - 3000 rpm
- 4 poles - 1500 rpm
- 6 poles - 1000 rpm
- 8 poles - 750 rpm
Threephase Double Speed:
2/4 poles - 3000/1500 rpm
4/8 poles - 1500/750 rpm
|
|
|
|
