|
|
Monoph tensions. 100/120V – 220/240V. 50Hz. Triph. 230/400V. 50Hz.
Special tensions and frequencies on request.
Direction of Monoph Rotation. with condenser and triph., reversible. With
centrifugal, reversible switch only with l’ stop.
Intensities of Starting has condensing or triph.: approximately 21⁄ 2 × L
nominal. With centrifugal switch: approximately 3 × L nominal.
Stages closed Rolls of the dice, lubricated with life by the manufacturer, with
discs springs of correction for silent walk.
Flexible connections Wire PVC 30cm. (SD18 and SD48 with box with
terminals).
Insulation Classifies “ F” (acceptable rise in temp. = 115°C with temp.
amibiante of maximum 40°C.)
Specifications B.S.5000 chap. II (IEC72) (CSA/UL on option).
|
|
The motors who are used for cutting machine with single or three phase, IP55, F class, CE.
Pls write to us through wangqg88@techtop.net.cn of you have any further question.
|
|
The induction motor is the most commonly used type of ac motor. Its simple, rugged construction costs relatively little to manufacture. The induction motor has a rotor that is not connected to an external source of voltage. The induction motor derives its name from the fact that ac voltages are induced in the rotor circuit by the rotating magnetic field of the stator.
ARC's complete lines of AC Induction Motors are manufactured using a squirrel cage rotor utilizing both aluminum and copper bars. Speed and torque can be tailored to individual requirements by changing the conductivity of the rotor bars. Custom units that operate at other frequencies are available.
|
|
|
The general AC induction electric motors are designed with IEC standard. These motors fit a variety of industrial applications and it is convenience for new and used applications. Electric motor power is available from 0.25 to 20HP. The frame is from 63 to 160. There are high efficiency series available. These motors are designed to meet high efficiency standard in varied-countries. High efficiency electric motor power is available from 1 to 10HP. The frame is from 80 to 132.
|
|
T-T Electric propses a series of three phase TAC-A ac motors in aluminium frame sizes 56 up to 132 and from 0.09 up to 11 kW. These fan cooled squirrel cage motors are totally enclosed (IP55 protection) and are manufactured using the latest state of the art technology.
TAC-A AC Motors
• Aluminium frames
• 2/4/6/8/10/12 poles
• Frame sizes 56-132
• Outputs up to 11 kW (14 HP)
|
|
400 thru 2000 HP
Three phase
5811 thru 8011 frames
1800 rpm and slower
50 and 60 hertz
Product Overview
The TOTALLY ENCLOSED TUBE COOLED TITAN® motor type JT has a cast iron and heavy fabricated steel construction with oversized grease lubricated antifriction bearings. To ensure a high degree of corrosion resistance, steel tube construction is standard. Further, the top hat assembly is treated with a Vacuum Pressure Impregnation cycle of 100% solid epoxy coating all surfaces. The VPI system, along with other internal and external protective treatments, provides exceptional durability in hostile environments. The winding is constructed with full Class F materials and receives two cycles of 100% solid epoxy VPI.
U.S. Electrical Motors offers a wide range of totally enclosed motors designed to provide years of trouble-free service in your most demanding applications. Included in this group are fan cooled machines supplied with a top-hat mounted air-to-air heat exchanger.
|
|
|
|
|
|
Standard Features
Output: 0.12 up to 7.5kW
Multivoltage - (220-240/380-415//440-460V or 380-415/660-690//440-460V)
Self Ventilated (TEFC)
EFF2 Improved Efficiency
Aluminium frames (63 up to 132M)
Mounting: B3T
Degree of Protection: IP55
Terminal block
Squirrel cage rotor /Aluminium die cast
V'Ring on both endshields
Stainless steel nameplate AISI 316
Continuous duty - S1
Ambient temperature: 40°C , 1000 m.a.s.l.
Metric thread cable entries in terminal box
Suitable for Inverter Duty applications*
Paint color: RAL 5007
*For additional details about Inverter operation, please contact our technical support.
*Special Insulation for voltage above 575V
Optional Features
Single voltage (other voltages)
Degree of Protection: IP56, IP65 or IP66
Other mounting configurations
Ventilation Motor, TEAO
Forced Ventilation, TEBC
Thermal protection:M
Thermistors
Thermostats
RTD-PT 100
Space heaters
Class "H" insulation
Mounting information
The foot mounting system offers great flexibility and it is quite simple allowing change on the mounting configuration without requiring any machining or modification on the motor feet.
Motor terminal box can also be rotated at 90 degrees allowing motor leads to be connected on any motor side.
|
|
The three-phase motors 3MA series, closed, externally fan cooled, manufactured according to the main international standards and particularly to the IEC 34 and 72 rules , are available in the sizes from 63 up to 132 , with pole number 2, 4,6 and 8 and with output power from 0,12 kW up to 11 kW.
They are featured by aluminium die-cast frame with removable feet, by the IP 55 protection level, by the F class insulation and by shielded type for life lubricated bearings.
|
|
Type Code: AEAL / AEAU
Low Voltage Aluminum Frame Motors
Multi Mounting
Output 0.12 ~ 7.5 KW
Pole (Speed) 2 ~ 8
Voltage 220 ~ 575V
Frequency (Hz) 50, 60
Frame Size 63 ~ 132M
Protection Enclosure IP 55
Design Standards: BS, AS, BSEN 60034
Environment: non-hazardous
Stator insulation: Class F Insulation, 1.0 SF.
|
|
|
|
|
|
Three-phase geared motors
Popular geared motors with constant speed and high functionality; power range 0.06 to 45 kW; output torques of up to 9,000 Nm
Detailed information
Geared motors - inverter variable speed drives
Popular industrial geared motors combined with electrical adjustment via 8200 motec frequency inverter; power range 0.25 to 7.5 kW; the distributed drive solution
Detailed information
Geared motors - electronic starter
Popular industrial geared motors combined with the electronic starter starttec; power range 0.25 to 4.0 kW; the distributed drive solution
Detailed information
Geared servo motors
Highly dynamic geared servo motors with synchronous and asynchronous servo motors; max. torque: 7 - 9,000 Nm; low backlash
Detailed information
Gearboxes - with shaft or flange input
Speed reduction gearboxes with free shaft or IEC flange at the input side suitable for motors to IEC 72; output torques of up to 9,000 Nm; finely stepped output speeds
Detailed information
Geared motors - mechanical belt adjustment
Popular industrial geared motors combined with mechanical adjustment via Simplabelt compact units; power range 0.25 to 45.0 kW; adjustment range 1:6
Detailed information
Geared motors - mechanical adjustment Disco
Popular industrial geared motors combined with mechanical adjustment via Disco variable speed drive; power range 0.25 to 7.5 kW; adjustment range 1:6
Detailed information
Disco variable speed drives
Mechanical adjustment with Disco variable speed drive; power range 0.25 to 7.5 kW; adjustment range 1:6
Detailed information
Standard three-phase AC motors
Standard three-phase AC motors; 0.25 to 22.0 kW 3 x 230/400 V; enclosure IP 54; mountings B3, B5 or B14; these motors are optimised for operation with a frequency inverter
|
|
|
MS series Aluminum housing three-phase asynchronous motors have good performance, safety and reliable operation, nice appearance , and can be maintained very conveniently, while with low noise, little vibration and at the same time light weight and simple construction. thhis series motors can be usder for general drive.
|
|
|
|
|
|
Applications
Pumps
Fans
Crushers
Conveyors
Machine tools
Milling applications
Centrifugal machines
Presses
Elevators
Looms
Grinders
Woodworking
Cooling
Packaging equipment
Other severe duty applications
Standard Features
Output: 0.12 up to 355kW
Multivoltage - (220-240/380-415//440-460V or 380-415/660-690//440-460V)
Self Ventilated (TEFC)
EFF2 Improved Efficiency
Cast iron frames (63 up to 355M/L)
Mounting B3T
Degree of Protection: IP55
Terminal block
Squirrel cage rotor/Aluminium die cast
V'Ring on both endshields
Stainless steel nameplate AISI 316
Class "F" insulation
Continuous duty - S1
Ambient temperature: 40°C , 1000 m.a.s.l.
Regreasing nipples from frame 225S/M and above
Thermistors (1 per phase) fitted in frame 160M and above
Metric thread cable entries in terminal box
Suitable for Inverter Duty applications*
Paint color: RAL 5007
*For additional details about Inverter operation, please contact our technical support.
*Special Insulation for voltage above 575V
Optional Features
Single voltage (other voltages)
Degree of Protection: IP56, IP65 or IP66
Other mounting configurations
Ventilation Motor, TEAO
Forced Ventilation, TEBC
Thermal protection:
Thermistors for frame 132S and below (Standard for frame 160 and above)
Thermostats
RTD-PT 100
Space heaters
Class "H" insulation
Roller bearings for frame 160M and above
|
|
T-T Electric proposes a series of square frame ac motors for variable speed applications with flux vector control types.
This asynchronous motor has been developped and designed to achieve the same high performance and dimensions as dc motors of similar power.
The AC Square motor complies with IEC 60034 standards and responds to the requirements for most industrial applications. The compact and flexible square frame design facilitates its integration into all types of machinery.
AMP
• 3 phase 230V-400V
• 4 poles
• Output: 1-300 kW
• Torque uo to 2050 Nm
• Speed up to 8000 rpm
• Center heights: 90,100,112,160,180,225 mm
|
|
The electric motor is the heart of the drive. ABM electric motors are induction motors of a squirrel-cage design. This design of motor has become the most important type of industrial drive units.
An ABM electric motor offers you:
complete maintenance-free operation
energy-saving with approx. 90 % efficiency
an environmentally friendly type of drive (compared with internal combustion engine hydraulics, pneumatics)
extremely reasonable cost/performance ratio
ABM motors are available as a standard motors or as drive motors for geared units.
ABM Rotary Current Motors
construction size 56-180
output up to 30 kW
system of protection up to IP 66
rated speed up to 3000 min-1
constant speed : 2-, 4-, 6-, 8-, 12-, 16-pole
pole-switching: 4/2-, 6/2-, 8/2-, 12/2-, 16/2-, 8/4- or 8/6-pole
standard mounting arrangements: B3, B5, B14
ABM Single-Phase Motors
frame sizes 56-90
ratings up to 3 kW
split phase: start and run capacitor, auxiliary windings etc.
standard mounting arrangements: B3, B5, B14
|
|
Good heat dissipation
through ribbed aluminium cast housing and integrated fan
Versatile compatibility
Well-graduated gear series, parking brakes, optional incremental encoders
|
|
Applications
Professional Floor Care
Low Speed Scrubbers
120 & 240 VAC, 50 or 60 hz
2 and 3 planet gearboxes
7.1:1, 10:1 and 11:1 Ratios
Class F insulation
Conduit Box for easy connection
High Torque/Low Running Amps
1 HP or 1.5 HP
7" diameter
UL and CUL listed
Rugged Construction
Start/Run Capacitors
Aluminum Frames
Various Motor wraps and colors including chrome and brushed aluminum
|
|
• All exterior components of 300 series stainless steel,
including motor frame, endshield and conduit box
castings
• Endshields o-ring sealed to frame
• IEEE 841 severe-duty features standard
• Meets demanding pharmaceutical requirements; also
excellent for chemical-processing applications
involving nitric acid and caustic lye
• Incorporates all WASHGUARD mechanical and
electrical features, plus IRIS™ insulation system
• BISSC certified
• Viton seals, gaskets, and o-rings
• Hydrophobic breathers
• NEMA, DC, JM Pump and Brakemotors available
from stock
|
|
|
The asynchronous motors of the series 13.710 are compact and space-saving. Available in a power range from 12 to 90 W, these motors are naturally ventilated. Since they do not have a fan they have low noise emissions and can be applied in production areas with fluff or dust. The motors are available with solid shaft and keyway, with flange mounting and can be fitted with a brake.
|
|
Induction Motors
Capacitor-run, single-phase and three-phase motors are available. Lead wire type, terminal box type and conduit box type motors are available depending upon how the power source and the motor are connected.
For unidirectional or bidirectional (after coming to a stop) continuous operation.
|
|
Type
4IK40A-BW2J
Series
Induction motors (High Speed Type)
Technical data
Type
4IK40A-BW2J
Frame size [mm]
80
Output power [W]
40
Shaft type
round
Rated speed for 50 Hz/60Hz [r/min]
2400/2900
Max. permissible torque for 50 Hz/60 Hz [Nm]
0.16/0.135
Power supply
single-phase 100 VAC
RoHS-compliant
yes
|
|
|
|
|
|
FRAME SIZE:
63 ... 160 - aluminium frame
OUTPUT:
0.12 ... 22 Kw
POLES:
2, 4, 6, 8 (pole changing on request)
INSULATION CLASS:
F
MOUNTING:
IM B3, IM B5 and IM B14 standard and special
DEGREE OF PROTECTION:
IP54 (IP55 on request)
MOTOR FEATURES:
output power on S1 duty
motors conforming to IE1 code; 2 and 4 poles motors conforming to IE2 code efficiency values according to IEC 60034-30;2008; efficiency testing method IEC 60034-2-1;2007
external fan (IC411)
- VERY HIGH- TORQUE A.C. BRAKE - series AMF
very high braking torque (Mb > 2 MN)
continuous braking torque adjustment in the range 30% ... 100% Mb max
standard braking torque setted at 70% Mb max (on request 30% ... 100% Mb max )
double braking surface
high braking capacity, powerful and precise
standard brake supply: 230/400V-50 Hz with separate terminal block
axial hand release always supplied loose
TYPICAL APPLICATIONS: heavy duty, lifting, cranes/bridge cranes, ceramic machines and wherever a very high intervention frequency and a powerful and precise braking is required
- HIGH TORQUE A.C. BRAKE – series AMBZ
very high braking torque (Mb > 1.5 MN)
double braking surface
TYPICAL APPLICATIONS: automation with high intervention frequency, gear motors, lifting, handling machineries
SPECIAL EXECUTIONS:
efficiency values conforming to EPAct; flywheel, anti-sticking brake disk; degree of protection IP56
|
|
|
|
|
|
BM series are asynchronous, three phase, self-braking. BM series power range is from 0.06 kW up to 11 kW. The motor brakes in case of power supply failure. The brake supply is DC as standard with the rectifier built in the terminal box. On request is possible to have a separate brake supply. The rectifier is supplied with an over-voltage and radio frequency emission protection.
BM series is projected to withstand high overheating guaranteeing high reliability, also under severe operating conditions.
BM series is suitable to be controlled by inverters. The winding insulation class is F. Class H available on request.
Motor enclosure is TEFC, IP54 protection degree (IP55/IP56 available on request). An hexagonal hole is present on the shaft end to allow manual rotation (up to 132 frame size). All the BM series motors can be provided with the brake hand release.
Shields and flanges are aluminium made for motors up to 90 frame size, and cast iron for motor frame size from 100 up to 132. On request 132 frame size motors can be supplied with cast iron frame.
BM series main features are a robust construction, an extremely silent running and braking, the gradual braking action and motor starting, and a notable compactness in dimensions. All MGM motors are CSA approved.
|
|
|
|
|
|
FRAME SIZE:
63 ... 160 - aluminium frame
OUTPUT:
0.12 ... 22 kW
POLES:
2, 4, 6, 8 (pole changing on request)
INSULATION CLASS:
F
MOUNTING:
IM B3 ,IM B5 and IM B14 standard or special
DEGREE OF PROTECTION:
IP54 (IP55 on request)
MOTOR FEATURES:
output power on S1 duty
motors conforming to IE1 code as standard; 2 and 4 poles motors conforming to IE2 code efficiency values according to IEC 60034-30;2008; efficiency testing method IEC 60034-2-1;2007
external fan (IC411)
- HIGH TORQUE DC BRAKE - series AMBY
high braking torque (Mb > = 1.5 MN)
step adjustment braking torque (~33%; 67%; 100% Mb max)
double braking surface
progressive and noiseless braking
a.c. brake on request (series AMBZ)
Typical applications: gearmotors, lifting, packing machineries, transfer machineries, automation requiring a smooth intervention
- LOW TORQUE DC BRAKE AND REDUCED OVERALL DIMENSIONS - series AMS
non adjustable braking torque (Mb < = MN)
increased braking torque (+50% of the Mb catalogue value)
single braking surface
progressive (cast iron fan) and noiseless braking
Typical applications: woodworking/cutting machineries, automation requiring progressive braking, wherever a long braking periods and high braking duties are required
SPECIAL EXECUTIONS:
certification cURus; hand release lever; encoder; axial independent cooling fan; double shaft
|
|
|
|
|
|
BA series motors are asynchronous, three phase, self-braking. BA series power range is from 0.25 kW up to 45 kW. The motor brakes in case of power supply failure.
The brake supply is AC as standard. On request is available a DC brake (the rectifier is enclosed in the conduit box) and or a separate brake supply.
BA series is projected to withstand high overheating guaranteeing high reliability, also under severe operating conditions.
BA series is suitable to be controlled by inverters. The winding insulation class is F. Class H available on request.
Motor enclosure is TEFC, IP54 protection degree (IP55/IP56 available on request). An hexagonal hole is present on the shaft end to allow manual rotation (up to 132 frame size). All the BA series motors are provided with the brake hand release.
Shields and flanges are aluminium made for motors up to 90 frame size, and cast iron for motor frame size from 100 up to 132 mm. On request 132 frame size motors can be supplied with cast iron frame.
Frame, shields and flanges are cast iron made from 160 up to 225 frame size.
BA series main features are the robust construction, a very short braking time, an high and constant braking torque, frequent and heavy braking cycles, rare and easy maintenance. All MGM motors are CSA approve
|
|
MSBCCL series -enclosed construction externally ventilated -sizes 63 ~ 160
The brake-motors of the MSBCCL series result from coupling an asynchronous three-phase motor and an electromagnetic D.C. brake unit. Due to their reliability and operating safety, as well as their quick braking time (connection & disconnection time = 5~80 milliseconds) they are suitable for a great variety of applications, as:
- Braking of loads or torques on the driving shaft.
- Braking of rotating masses to reduce any lost-time.
- Braking operations to increase the set-up precision.
- Braking of machine parts, according to safety rules.
|
|
Clutch & Brake Motors
This compact precision motor is equipped with an internal clutch and brake mechanism. This combination makes it ideal for applications involving frequent START/STOP operation, positioning, indexing, jogging and incremental feeding.
Suitable for high-frequency operation
Compact design
Highly reliable gearheads
|
|
|
SEW-Eurodrive's squirrel-cage motors and brakemotors deliver exceptional performance and reliability combined with low maintenance. Designed for continuous duty under tough service conditions, these low-noise brakemotors are used wherever fast, safe braking is a major application requirement.
|
|
GE ASD Inverter Duty:
Designed for use in blowers, fans, pumps, conveyors, material handling, compressors, and other inverter duty appliccations.
Features and Benefits:
- Standard Features
- Infinity:1 CT Speed Range CH to 90 Hz
- IGBT Compatible
- N/C thermostat
- Opp DE mounting face & stub shaft for tach mounting
- C-Face foot mount thru 30 HP
- Cast Iron Frame & Brackets
- Class F Insulation
- 440 Fr have insulated ODE brg/Grd brush
|
|
Appliance Motors
Applications
Semiautomatic washing machines of unique speed, automatic washing machines top load and automatic washing machines front load.
Characteristics Standard
Single-phase motors
Unique speed (4 poles) or double (2/12, 2/16, or 2/18 poles)
Permanent Capacitor
Thermal protector
Level of protection IP00
Isolation class "B"
Tension 110V or 220V
Frequencies: 50 or 60Hz
Rests with bearings or bushings according to application
Optional Main
Axis with pulleys
Fixation by spear
Fixation by the legs
|
|
Brushless permanent magnet motors from Iskra Avtoelektrika combine high performance and high reliability with a simple and therefore the best price-performance motor design. The motors offer high efficiency over a wide speed range and high torque at low speeds.
The motor construction with no commutator and brushes, no slots and windings on the rotor provides very low acoustic noise and torque-ripple.
With the addition of an efficient electronic controller already incorporated in the motor construction, the motor and electronics represent a single compact drive unit, and this type of motor becomes acceptable for many applications.
|
|
|
|
