|
|
|
|
|
|
The motors with integrated encoder represent a revolutionary component in the automation field offering to the OEM and to the end user new opportunities and notable economy advantages due to its user-friendly design. The new range of three-phase asynchronous motors with integrated encoder has been designed specifically to offer the end user a comprehensive choice of an already widely tested three phase motor, with superior quality. Two main choice of MGM motors with built-in are available: brake motors (BAE/BMEAV) and standard motors (SAE/SMEAV). The power range starts from 0.06 kW up to 45 kW (from 56 up to 225 frame size).
The unit consists of a three phase asynchronous motor with high efficiency and low moment of inertia and with the actual encoder located in the back (ND-side). MGM motors are suitable for inverter use. The mechanical coupling is the same of a standardized motor (special shaft and flange are available on request), wirings are very simple: power and electrical signal are separated.
MGM motors with built-in encoder can be supplied in conformity with requirements of standards UL 1004 “Electric motors” and CSA 0 22.2 No. 100-95 Motors and generators” (c CSA us approval).
|
|
Applications
Commercial and industrial pumps
Residential pumps (jacuzzis, pools, hot tubs)
Centrifugal pump motor system
Hydraulic pumps
Other
Standard Features
Three-phase, II pole, 60Hz
Voltage: Three-Phase: 208-230/460V or 575V
Squirrel cage rotor
Totally enclosed fan cooled
Ball bearings
Service factor according to NEMA standard
MG 1-18.329
Class “F” insulation (T 80ºC)
Standard: NEMA-MG 1-18.326
Rotation: - Form J: non reversible
- Form C: reversible
Form J: stainless steel shaft end
Paint: RAL 7022
Optional Features
Special voltages
Specially designed shaft
Automatic thermal overload protector
Other mounting configurations
|
|
AC Induction Motors
For Traction and Pump Applications
The FLT Series AC Motors have been developed specifically for use in forklift trucks and other heavy duty mobile equipment. These motors are designed to endure high levels of vibration and shock in tough application environments.
These motors are made by Hanning Electro-Werke, a company with over fifty years in the development and manufacturing of high quality AC motors for industrial applications.
|
|
With their high-quality products and services, ELIN EBG Motoren have established themselves as a partner for power-supply companies all over the world. Our list of references includes customers all over Europe, e.g., the most powerful brown-coal power plants in the new German provinces, but also in China, India, Australia, Canada and the U.S.A., among others.
Our high quality products are used in machines such as mills, boiler feed pumps, main-cooling-water pumps, air-intakes and induced-draught fans. The most convincing advantages are low maintenance costs, immediate availability, long warranties, flexible dimensions as well as customer-designed cooling and protection types. References from all over the world are proof of our competence. We are your partner for voltage ranges between 380 V and 18.8 kV and up to 25 MW output.
|
|
Performance:
The motor is especially designed with powerful performance for industrial sewing machines purpose.
Smooth rotation:
Vibration and noise are minimized.
Accurate clutch operation:
The size and weight of the flywheel eliminate speed reduction when it engaged with the clutch. Heavy-duty lining material prevents any slipping. Therefore the accurate clutch operation permits instant starting and stopping of the sewing machine.
Ajustable clutch operation:
The operating lever can always be kept in line with the pitman rod and foot treadle.
Belt tightener:
The motor is provided with a belt tightener of American dimensions. The tension of the belt is easily adjusted by simply loosening the adjustment nut.
Euro-base:
Dimensions for EURO-standard installation is available.
|
|
Series: K2.. 90 to 355
Output range: 0.25 kW to 500 kW
Class: 3,000; 1,500; 1,000; 750 rpm, lower speeds and pole-changeable versions on request
Features: Energy-efficient and environment-friendly, suitable for frequency converter supply, designed to DIN EN 60034 (IEC 72) and pr EN 12101-3, mounting dimensions and assignment of output ratings to DIN 42673, 42677 or progressive, robust low-vibration grey-cast iron design, versions for jet fans without shaft-mounted fan or pad-mounted, robust low-vibration grey-cast iron design, degree of protection IP 55, higher degrees up to IP 65 on request, class F insulation with thermal reserve, class H and higher possible, various modifications available
|
|
|
|
|
|
Applications
These smoke removal systems are applied in a broad range of applications including large buildings, shopping malls, factories, warehouses, enclosed parking lots, tunnels, among others. In other words, they are used where a large concentration of people in commercial and industrial facilities is present.
Standard Features
Output: 0.12 up to 355kW
Multivoltage - (220-240/380-415//440-460V or 380-415/660-690//440-460V)
Ventilation Motor, TEAO
Cast iron frames (80 up to 355M/L)
Pad Mounted (frames 80 up to 250S/M)
Mounting: B3L (frame 280S/M and above)
Degree of Protection: IP55
Flying leads 1 meter long
Squirrel cage rotor/Aluminium die cast
Stainless steel nameplate AISI 316
Class "F" insulation
Continuous duty - S1 (S2 - 200°C/2h once only)
Ambient temperature: 40°C , 1000 m.a.s.l.
Regreasing nipples from frame 225S/M and above
Thermistors (1 per phase) fitted in frame 160M and above
Paint color: Silver
Optional Features
Single voltage (other voltages)
Degree of Protection: IP56, IP65 or IP66
Other mounting configurations
Terminal Box
Self Ventilated, TEFC
Thermal protection:
Thermistors for frame 132S and below (Standard for frame 160 and above)
Thermostats
RTD-PT 100
Space heaters
Class "H" insulation
Roller bearings for frame 160M and above
|
|
Output ratings up to 50,000kW (70,000HP)
Voltages ranging from 220 to 13,800V
Speed from 3600 to 300rpm
M Line motors are manufactured in different configurations in reference to cooling methods and degree of protection. As a result, a motor configuration can be defined in such a way to better meet operating and environment conditions.
Motor supplied in frame sizes IEC 280 to 450 (NEMA 4400 to 8000) are manufactured in cast iron frames.
Those motors manufactured in frame sizes IEC 500 (NEMA 8800) and larger have their frames built in welded steel plates.
Main advantages in using WEG M Line motors include:
- High efficiency
- Degree of Protection IP23 (WP-I), IP(W)24 (WP-II) or IP(W)55 / IP(W)56 / IP(W)65
- Reduced noise level
- Low and easy maintenance
- Can be built to meet API 541 standards
- Squirrel cage rotor
Slip ring (wound rotor)
- Bearings
Oil lubricated sleeve bearings
Grease or oil lubricated ball or roller bearings
- Interchangeability with existing motors.
|
|
* Wide range of standard and special executions to specific demand
* 70% of sales are tailored to customer demand
* Special electrical and mechanical design:
- single, double and triple polarity for fan drives and lifting
- torque, speed and current on customer demand
- single-phase motors with high peak torque
- single-phase motors suitable for operation on 50 and 60 Hz
- special voltages (208V - 60 Hz ... 575V - 60 Hz)
- special sizes, flanges, bearings and shafts
- over 20,000 shaft and flange configurations
|
|
Outside of our range of motor elements (built-in motors) SycoTec is developing and manufacturing customized Drive Systems specific to your requirements. The choice of motor-technology as well as the design of the system is always a very tight, hand-in-hand effort with our customers. As a system supplier, we certainly support and research with you the right drive (inverter), if it is not presently available. SycoTec, as a inverter manufacturer, can offer you a quite good range and suitable units.
Our challenge is, to offer you the highest quality system as the single source provider, which means for you "one point of contact".
Application field:
- Motor for a leakage-searching unit up to 90,000 rpm (motor is running under vacuum)
- Motor for air cargo transportation systems (requirements: high torque and low weight)
- DC-motor element for a micro spindle up to 100,000 rpm
|
|
|
|
|
|
These motors, designed for industrial and commercial applications, range in size from one horsepower to 400 horsepower. They are available in two-pole, four-pole or six-pole configurations from stock.This product line includes open dripproof, totally enclosed fan cooled (TEFC), TEFC-severe duty, and inverter duty operation models. Our specialty product line includes washdown models for food service applications and motors designed for use with variable frequency drives.
Century® Commercial and Industrial Motors
General Purpose
• 1 - 400 Horsepower
• Rugged Century® and Century II® Industrial are the backbone of our commercial and industrial line. These integral horsepower motors come in a wide range of ratings with styles and special features that make them the leading choice in tough industrial applications.
• Century E-Plus and E-plus 3® motors offer energy-efficient designs and value-added features for industrial blower, pump, compressor, and conveyer equipment. These totally enclosed fan-cooled (TEFC) motors are designed for continuous duty and come in sizes ranging from 20 through 400 horsepower.
• Speed Engineered® inverter-duty motors are designed, built, and tested to be 100 percent corona free. These motors were developed for use with variable frequency drives and offer the special corona protection that traditional motors can't provide.
|
|
APPLICATIONS:
Pumps, fans, blowers or other inverter powered applications.
FEATURES:
Inverter Grade® Insulation System (Meets NEMA MG-1 Part 31)
Class F Thermostats (One Per Phase)
Rolled Steel Frame (140-320), Cast Iron Frame (360-440)
Aluminum End Shields 140-250, Cast Iron End Shields 280-440
40C Ambient, NEMA Design B Performance (4)
Constant Horsepower To 90 Hz
3 Year Warranty On Inverter Power
Special Balance
Regreasable Bearings 180 Frame & Up
Double Shielded Bearings 140-400, Open On 440 Frame
Double Dip & Bake With Extra Bracing
Premium Efficient Design, F1 Assembly Position
Class F Insulation
Conversion Kits: Canopy Kits (140-320 Frame)
Lifting Provisions (210 Frame & Up)
1.15 S.F. On Sine Wave / 1.0 S.F. On PWM
|
|
Series W21R 56 up to 315 efficiency determination to DIN EN 60034, WE1R 80 up to 315 efficiencies to DIN EN 60034 or C390-93, efficiency determination to IEEE112
Output range 0.06 kW to 335 kW
Speeds 3,000; 1,500; 1,000; 750 rpm
Features Energy-efficient and environment-friendly, designed to DIN EN 60034 (IEC 72), mounting dimensions and assignment of output ratings to DIN 42673, 42677 or progressive, robust low-vibration grey-cast iron design, degree of protection IP 55, higher degrees up to IP 65 on request, class F insulation with thermal reserve, class H available as an option, terminal box optionally top-mounted, RHS or LHS up to frame size 315, various modifications possible
|
|
Series: K... 56 to 315
Output range: 0.06 kW to 315kW
Speeds: 3,000; 1,500; 1,000; 750 rpm
Types of protection: "Increased safety" EEx e II 2G, "flameproof" EEx d/de II 2G, "non sparking" EEx nA II 3G, use in zone 21, II 2D, use in zone 22, II 3D
Features: Explosion protection to DIN EN 50014, 50018, 50019 or EN 50021/IEC 79-15 or EN 50281, compliant with ATEX 95 (100 a), energy-efficient and environment-friendly, designed to DIN EN 60034 (IEC 72), mounting dimensions and assignment of output ratings to DIN 42673, 42677 or progressive, robust low-vibration grey-cast iron design, degree of protection IP 55, higher degrees up to IP 65 on request, thermal class F with thermal reserve, thermal class H available as an option, various modifications possible
|
|
|
|
|
|
Applications
Environments containing flammable gases or vapour continuously, intermittently or periodically in enough amount to generate explosive or flammable mixtures arising out of repairs or maintenance services.
The most common locations of Zone 1 and 2, group IIA and IIB are those where the following gases are found present: oil, naphtha, benzene, ammonia, propane, diethylic ether, acetone, alcohol, industrial methane, natural gas.
The main applications include fans, blowers, crushers, conveyor systems, mills, cranes and other applications located in areas that require explosion proof motors
Standard Features
Output: 0.55 up to 315kW
Multivoltage – (220-240/380-415//440-460V or 380-415/660-690//440-460V)
Self Ventilated (TEFC)
EFF2 Improved Efficiency
Cast iron frame: 90S up to 355M/L
Mounting: B3T
Degree of Protection: IP55
Squirrel cage rotor/Aluminium die cast
Stainless steel nameplate AISI 316
Class of temperature T4
Class “F” insulation with T 80K
Continuous duty - S1
Ambient temperature: 40°C , 1000 m.a.s.l.
Regreasing nipples from frame 225S/M and above
Thermistors 150ºC - 1 per phase
Metric thread cable entries in terminal box
Hardened set screws
Internal DE and NDE bearing cap to prevent flame propagation
Machined metal to metal surfaces between frame and terminal box
Earth lug inside the terminal box
Suitable for Inverter Duty applications
Epoxy based paint plan: RAL 5010
|
|
Design EEx e II ignition protection "Increased Safety%u201D type EEx de II ignition protection "Pressure-resistant sealing type, in accordance with ATEX 100a
Main applications areas subject to the danger of explosion such as the chemical and petrochemicals industry, process engineering, drive systems
Special applications environmental technology
Performance range 0,09 - 165 kW
Size 56 - 355
Asynchronous ATB FLEXIDRIVE
Design modular squirrel cage rotor motor as a standard, three-phase motor for low voltages, explosion protected motor, brake motor, single-phase motor
Main applications all types of industrial operations
Special applications -
Performance range -
Size 63 - 90
|
|
Motors and electrical equipment
BARTEC develops and manufactures electric motors and electrical equipment for safe and reliable solutions in power, lighting, control and monitoring applications.
Our production program includes:
Electric motors
Special motors and special solutions
Switches and controllers
Lighting systems
All products can be supplied for potentially explosive atmospheres, wet environments or tailored to our customers' requirements.
|
|
• Our original moisture-shedding “Duck” motor
• Durable RUST-OLEUM® white epoxy coating
• Stainless steel shaft, conduit box cover, nameplate, fan
guard
• Special gaskets, slingers and seals
• Four endshield drains
• Moisture-resistant interior components
• Inverter rated IRIS™ insulation system
• Single-phase, three-phase and DC SCR models
• NEMA Sub-FHP and IEC metric frames in stock
|
|
Type Code: AEEAXU (NEMA)
AEEDXU (IEC)
Explosion-Proof Horizontal Foot-Mounted
Low Voltage Squirrel Cage Motors
TEFC, T-frame, NEMA Design B
Output 3/4~150 HP
Pole (Speed) 2 ~ 8
Voltage 230/460V
Frequency (Hz) 60
Frame Size 143T ~ 445T / 90S ~ 280MC
Protection Enclosure IP 54
UL Approved No. E84757 (CSA Approved No. LR64671)
Suitable for Class I, Class II, Division I, Group D, E, F, G
Design Standards: UL 674; NEMA MG-1, MG-13; CSA 22.2 No. 145
Stator Insulation: Class F insulation, 1.15 SF.
Rugged Cast Iron Construction.
Performance Data per ANSI-IEEE standard 112 Method B
Non-sparking external fans, non-sparking brass flingers on both ends
Oversized Cast Iron conduit box
Non-hygroscopic insulation system.
|
|
Within special motors for minig industry EMIT manufactures two serie sof motors: dSKgw and dSKgwp.
Squirrel cage induction motors series dSKgw are designer for driving mining organ of combined cutter-loaders.
Squirrel cage induction motors series dSKgwp are designer for driving other minig equipment especially conveyors.
motors of both series can operate in headings of coal mines endangered with methane (class 'a', 'b' and 'c') and coal dust (class 'A' and 'B') explosion.
|
|
With our explosion-proof low voltage motors, we offer you a complete programme of safe, reliable, durable and economically viable motors with degrees of protection IP 54 to IP 65, and EEx e and EEx de. All motors are also available as special versions - designed to suit your individual requirements.
We also offer you more than just innovative design and engineering.
In more than 80 countries around the globe, our international service network with authorized service centres offer you a complete range of services: These services include intensive consulatation and engineering design as well as on-site training.
Our quality control system which is certified to DIN/ISO 9000, guarantees a consistent high level of quality. But there''s even more: As an environmentally friendly company, Moeller Antriebstechnik GmbH is also certified according to the EU-Enviornmental Audit (EEC 1836/93).
|
|
Durable fractional horsepower motors are available in sizes ranging from 1/20th to five horsepower and include split-phase, permanent split capacitor, capacitor start, and polyphase models. We offer fractional horsepower motors for a wide range of residential and commercial applications:
Heating And Cooling Equipment
Universal lectricä Blowers: A.O. Smith shaded pole, permanent split capacitor and split phase induction motors are used in residential and commercial furnace blowers. Our 5 and 51/2 inch diameter motors are designed for direct-drive and belt-driven applications and come in a wide variety of mounting configurations.
|
|
Series: SEE315-355; Sh355-500s
Output: 160kW up to 1500kW
Speeds: 3000, 1500, 1000, 750, 600, 500 rpm
SEE series motors with insulated bearing chamber and whole Sh...s series is suitable for converter operation.
Protection degree IP55, insulation class F. Cast-iron frames with terminal boxes placed on top.
On clients request motors can be fitted with external ventilation system, impulse encoder for precise speed of rotation control, heaters and SPM's.
|
|
FRAME SIZE:
80 to 160 – aluminium design
180 to 315 – cast iron design
OUTPUT:
0.75 to 200 kW
POLARITY:
single - 2, 4 poles
RATED FREQUENCY:
50 - 60 Hz
MOUNTING:
IM B3, IM B5, IM B35, IM B14, IM B34
DEGREE OF PROTECTION:
IP55 or higher
MAIN FEATURES:
motors comply with IEC requirements
TEFC construction
temperature rise to class B
high efficiency IE2 motors, efficiency values to IEC 60034-30;2008; efficiency testing method IEC 60034-2-1;2007
high efficiency EFF1 motors, values to CEMEP Voluntary Agreement; efficiency testing method IEC 60034-2;1996
high efficiency EPAct motors, verified by UL Underwriters Laboratories Inc. (Department of Energy n° CC046A)
OPTIONS:
cURus certification
CSA certification
from frame size 90 operate on static frequency converters
encoder
forced ventilation
mechanical and electrical design on specific demand
|
|
SM motors Series consist of three-phase asynchronous electric motors with power range between 0,09 kW and 45,0 kW while the motor frame is from 56 up to 225.
The basic construction is closed, fan cooled and IP 55 enclosure rating.
SM series motor is able to properly run under overload conditions thanks to a high thermal reserve; the insulating materials are class F as standard (Class H on request).
|
|
MSBCC series -enclosed construction externally ventilated -sizes 63~160
The motors under this series result from coupling an asynchronous three-phase motor with an electromagnetic brake unit. Due to their safety and precision as well as their quick stop with a connection and disconnection time of a matter of 5~80 msec (milliseconds) they are suitable for a variety of applications such as:
- Braking of loads or torques on the driving shaft.
- Braking of rotary masses in order to avoid any down-times.
- Braking to increase the set-up precision.
- Braking of machine parts in case of danger, in compliance with accident prevention rules.
|
|
High Efficiency motors eff1
The three-phase motors of 3MA and 1M-1 series can be delivered in High Efficiency version eff 1,according to the CEMEP voluntary agreement , in the power range from 1,1 kW up to 90 kW , in 2 and 4 pole.
They come from the 3MA and 1M-1 standard series, on which suitable measures on the active components and on the material quality have been taken, in order to achieve significant increases in the efficiency.
|
|
Type Code: AEEANE TOP
Standard 3-Phase Low Voltage Induction Motors
TEFC, NEMA, T-Frame, Design B
Output 1 ~ 200HP
Pole (Speed) 2 ~ 6
Voltage 230/460V (208V De-Rating Operation), 460V, 575V
Frequency (Hz) 60
Frame Size 143T ~ 449
Protection Enclosure IP 44
Design Standard: NEMA MG-1, MG-13
Environment: non-hazardous
Stator Insulation: Class F Insulation.
ANSI/IEEE-112 Method B Test
|
|
Three-phase squirrel-cage high voltage motors in finned frame are characterized mainly by very high degree of energetic efficiency.
Thanks to compact and stiff frame construction motors have very low vibration degree and low noise level.
Sh series motors are of general industrial use. They are used for driving various machines and devices which work is of continuous duty without frequent starting and reversing.
Motors can work in fast-switching automatic standby power systems. They can be restarted at 100% residual voltage and at full opposition of phases.
|
|
|
|
|
|
Output rating from 100 to 3150kW (135 to 4000HP)
Voltages from 220 to 6900V
Speed from 3600 to 600rpm
With simple and compact construction, H Line motors are widely used due to their high reliability making them suitable for the majority of the driven machines found in industries.
The frame construction consists of a high resistance solid block and it is fitted with external cooling fins. The whole cooling system, which consists of an internal and an external air flow, provides an homogeneous blow of cooling air inside the frame for maximum performance of such motors.
Main advantages in using WEG H Line motors include:
- High efficiency
- Degree of Protection IP(W)55 / IP(W)56 / IP(W)65 (TEFC, TEBV)
- Reduced noise level
- Low and easy maintenance
- Robust solid high strength cast iron construction
Can be built to meet IEEE841 (2001) mill and chemical duty Can be built to meet API541 standards
- Bearings
Oil lubricated sleeve bearings
Grease or oil lubricated ball or roller bearings
- Cooling
Self cooling
Forced cooling, usually required for VFD applications.
- Interchangeability with existing motors
- Internal air flow
- Heat exchanger not required.
|
|
|
|