|
|
EMC Lab Low Loss Armored Test Cables - EM Series
MegaPhase’s EM series is a test cable specifically for the needs of EMC lab technicians. These cables feature exceptionally low insertion loss, excellent RF shielding properties and crush resistant armoring.
|
|
PUR Weld Cable
PUR Control Cable
Regulated Voltage / Medium Frequency Cable
Regulated Voltage Cable
Proportional Valve Cable
PUR Hybrid Cable
Interbus Hybrid Cable
IBS Cable Rugged Line
Special PUR Cable
PUR Hybrid Cable (Cable for Welding Control)
PUR Multi Bus Cable
|
|
|
|
|
|
MAN-MADE MACHINES
LAPP MULLER is the partner of robots, gantries, machine tools manufacturer for the design and the production of power lines, power/control, servomotors and safety control systems.
Bending
Bending/Torsion combined
Oils
Paint, Solvents
- ROBOCABLESÒ F3
Miniaturized cable for drag chain
- ROBOCABLESÒ F1X
Miniaturized cable for very long and high speed drag chain
- ROBOCABLESÒ F1
Cables for robots in bending and torsion combined up to +/-360°/m
- ROBOCABLESÒ F1 GOLD
Cables for robots in bending and torsion combined up to +/-720°/m
- ROBOCABLESÒ UL
All our range of ROBOCABLESÒ with UL homologation
- ROBOCABLESÒ BUS
Cables answering to all existing bus protocols
- ROBOCABLESÒ CLEAN ROOM
Complete range of ROBOCABLESÒ for use in Clean Rooms, with DIN ISO 14644-1 certificate
- HYBRID UMBILICALS
Composite robotics cables interface with electric hydraulic pneumatic and optic
- HARNESS CABLES
- ROBOTS EQUIPMENTS AND SERVICES
These companies trust us :
STAUBLI, COMAU, KUKA, ABB, PEUGEOT CITROEN, NELSON, SAMSUNG, FIAT, DURR, MICHELIN, ROBOTEC….
|
|
MAN-MADE MACHINES
LAPP MULLER is the partner of robots, gantries, machine tools manufacturer for the design and the production of power lines, power/control, servomotors and safety control systems.
- ROBOCABLES F1
Cables for robots in bending and torsion combined up to +/-360°/m
- ROBOCABLES F1 GOLD
Cables for robots in bending and torsion combined up to +/-720°/m
- ROBOCABLES UL
All our range of ROBOCABLES with UL homologation
- ROBOCABLES BUS
Cables answering to all existing bus protocols
- ROBOCABLES CLEAN ROOM
Complete range of ROBOCABLESÒ for use in Clean Rooms, with DIN ISO 14644-1 certificate
- HYBRID UMBILICALS
Composite robotics cables interface with electric hydraulic pneumatic and optic
- HARNESS CABLES
- ROBOTS EQUIPMENTS AND SERVICES
These companies trust us :
STAUBLI, COMAU, KUKA, ABB, PEUGEOT CITROEN, NELSON, SAMSUNG, FIAT, DURR, MICHELIN, ROBOTEC….
|
|
Robotic cables 300 volt ~ 300/500 volt ~ 600volt ~ 0.6/1 kV
PVC Control and Power Cables
Low capacitance zero halogen PUR Electronics Cables
PVC/PUR Control Cables
PE/PUR power and servo single conductors 0,6/1 kV
TPE-E/PUR Electronics and Control Cables
TPE-E/PUR servo single conductors 0,6/1 kV
|
|
|
Point of Load / Regulators are generally used in Intermediate Bus Architectures to step down a bus voltage to payload voltage levels. These products are available in various industry standard configurations offering through-hole and surface-mount options and a wide range of input and output voltages.
|
|
|
DIN bar controller with incorporated SSR and heatsink for 25, 40, 60, 75, 90, 120 Ampere currents
|
|
|
three-phase assembly with 6 thyristors in bridge of graetz or three-phase contactor to control a load by an order 4-20mA or 0-10V through a chart of electronic order with piloting in phase or by wave trains, for networks juqu' with 690V AC and for currents of a few tens of amps to several thousands of amps.
|
|
|
GE offers a complete product range combining high operational safety with high technical characteristics.
|
|
|
three-phase assembly with 6 thyristors in bridge of graetz or three-phase contactor to control a load by an order 4-20mA or 0-10V through a chart of electronic order with piloting in phase or by wave trains, for networks juqu' with 690V AC and for currents of a few tens of amps to several thousands of amps.
|
|
Regulated switch mode power supplies from 0.3 to 40 A for industrial applications
Description
Modular and optimum power supplies for networks single-phase 100-240 V
Output voltage: 5, 12, 24, 48 V -7 W-145 W
Highly compact sizev
Wide voltage range
Fixing by screw or on omega rail
Universal power supplies, for networks single/3-phase 100-500 V
Output voltage: 24 V and 5 to 15 V by converter modules 48 V/72 W-960 W
Integrated energy reserve
6 product references from 3 A to 40 A
Fixing on omega rail
Advanced diagnostics by LED and relay contact
Integrated anti-harmonics filter
Function modules to respond to problems of network cuts, 24 VDC circuit overloads and availability
|
|
Small size. Big Control. Offering a diverse line of power relays to amplify, signal transfer, signal conversion, noise protect, calculate, detect, alarm, and more. Designed with an attention to detail, Honeywell power relays are often ideal for sequence control and power switching capabilities.
Along with producing reliable solutions for industrial control, Honeywell brings engineering expertise and application knowledge no other company can offer.
|
|
Yaskawa's Bestact high capacity 3 and 5 amp reed relays (RI & RZDR- series) offer industry DIP standard mounting format.
They have UL/cUL recognition for gaseous Class I, Division 2 hazardous locations or corrosive environments and have been shown to significantly reduce downtime and/or maintenance costs.
These relays have pilot duty inductive switch ratings of 360VA (AC), 69VA (DC) and horsepower ratings of 0.5 and 1/8 HP respectively. For low-level loads, they exhibit a wiping action that keeps contact resistance very low and stable.
2 and 4-pole configurations of normally open and normally closed contacts are available.
|
|
A family of RF power detector integrated in loop controllers for PA power control applications in cellular handsets.
|
|
Control Power Transformer
Our wide range of control power transformers is designed to provide control power in medium voltage switchgear. Units are available in both single and three phase configurations with some models capable of vertical mounting to conserve space.
Features and Benefits:
Manufactured to meet the requirements of IEEE C57.12.01
Primary windings are vacuum cast for high dielectric strength and ruggedness. Vacuum cast secondary coils are available in some models.
Constructed with high quality grain-oriented core steel and copper conductor
Units are partial discharge tested in accordance with Canadian Standard C9-M1981 (reaffirmed 1997)
Standard voltages are 120/240 for single phase units and 208Y/120 for three phase units with other voltages available.
Product Scope:
Voltage Class: 5 to 34.5 kV
BIL ratings: 60 to 150 kV
Thermal Ratings: 0.5 to 150 kVA
|
|
|
The 977CM - Current Monitoring Pulsed DC Controller, brings together powerful long-range ionisation; closed-loop feedback; self-monitoring and remote reporting. A complete package, unique to Meech. Self-monitoring and adjustment of performance allows optimum control of static for much longer periods than previously possible. Local display and output signals alert operators to the need to clean the equipment.
|
|
|
The Model 233v3 Pulsed DC Controller has been designed to operate with the Series 200 range of ionisers for ESD applications. The 233v3 is light, compact and features lockable plug and socket connectors for quick release. It also provides the option of Steady State DC (SSDC) output.
|
|
|
The Model 977v3 Pulsed DC Controller has been designed to operate with the full industrial range of Meech Pulsed DC static elimination equipment. It is light and compact but able to cope with the most technically demanding industrial applications. In addition to the ability to control power output, frequency and polarity, the 977v3 also offers alarm and remote monitoring and control functionality. A new feature of the 977v3 is an 8- way DIN for connection of an ion balance sensor and feedback system. Patent No. ZL200530000278.0
|
|
POWER FACTOR CONTROLLER
- No need to use extra energy analyzer/multimeter in your compensation panel.
- Indice synchronization with electric meters.
- Built-in temperature sensor.
- Dynamic compensation mode, detects failed capacitors which are least than 20 % of its initial value. Automatic withdrawal of failed capacitor from compensation.
- Transmission error < 0, 1 %
- Real time clock
- Indicating voltage and current harmonics up to 21st harmonics over harmonics spectrum and harmonics tables.
- Indicating connection time for each of the banks.
- Learning connection configurations and capacitor stages.
|
|
The network analyzer MCA Plus is an instrument that measures, calculates and shows the main electrical parameters in industrial 3 phases networks (either well-balanced or non-well balanced).
Reactive energy controllers MCE and MCX are designed for measuring the needs of reactive power in an installation and carry the necessary instructions for switching on/off the capacitors in order to maintain the right power factor cos.
|
|
|
|
|
|
|
The REOTRON RP-Controller is used for control/regulation of reactive power compensation units. The standard RP-Controller is designed for a 400 VAC to 415 VAC (L-L) operation voltage and has a switchable current-measurement input 5A/1A. From the 24 V switching outputs for the compensation stages, it is possible to directly control 24 VDC relays or the REOTRON THYQC50 thyristor modules. The control principle enables minimum number of switching operations in order to ensure optimum capacitor life time. The 4-quadrant operation enables to feed back into the own power systems. In case of interruption in the voltage circuit, the zero voltage release isolates the compensation unit from mains and inhibits the equipment for a while. The 4-line-display in LCD design includes a bar-graph display for the relevant capacity/efficiency and also shows the switching condition of the individual stages. Error messages and events in general are displayed in plain text and stored in the logbook. The controller can also be monitored from an RS 232 interface as an option (remote enquiry).
|
|
Key exchange boxes are used to release one or several keys by introducing one or more keys which are then trapped inside the box.
For example, all keys from earthing switches are trapped inside the box in order to release keys giving access to the transformer.
The minimum number of cylinders is 2. The maximum depends on the space available to install the lock. In some cases, depending on the number of keys to be used and the space available, several boxes have to be used as a “chain”. The last key of the preceding box becomes the first key of the following box and so on.
The switch at either end of the box to give an electrical signal showing whether the key is inside the lock or not.
|
|
Ratings 25 - 125A three and four pole
Comply with IEC 947-3 AC23 utilisation category
Disconnecting electrical equipment from the main
Visible indication of contacts status (when operation handle is in the 'OFF' position all contacts are open)
Red/Yellow emergency stop operating handle
Handles padlockable in the 'OFF' position
Front and rear mounting options
Special emergency stop switches with undervoltage release available
Enclosed versions available
Wide choice of accessories : terminal shrouds, black/grey operating handles, auxiliary contact blocks, fixed and switched neutral add-on contact poles, shaft extensions for greater panel depth operation
|
|
Key exchange boxes are used to release one or several keys by introducing one or more keys which are then trapped inside the box.
For example, all keys from earthing switches are trapped inside the box in order to release keys giving access to the transformer.
The minimum number of cylinders is 2. The maximum depends on the space available to install the lock. In some cases, depending on the number of keys to be used and the space available, several boxes have to be used as a “chain”. The last key of the preceding box becomes the first key of the following box and so on.
The switch at either end of the box to give an electrical signal showing whether the key is inside the lock or not.
|
|
Ratings 25 - 125A three and four pole
Comply with IEC 947-3 AC23 utilisation category
Disconnecting electrical equipment from the main
Visible indication of contacts status (when operation handle is in the 'OFF' position all contacts are open)
Red/Yellow emergency stop operating handle
Handles padlockable in the 'OFF' position
Front and rear mounting options
Special emergency stop switches with undervoltage release available
Enclosed versions available
Wide choice of accessories : terminal shrouds, black/grey operating handles, auxiliary contact blocks, fixed and switched neutral add-on contact poles, shaft extensions for greater panel depth operation
|
|
|
|
|
|
The power steering controllers are designed to enable and to control the speed of hydraulic (series wound and permanent magnet ) motors used for power steering in industrial vehicles. These controls are used in conjunction hall effect pulse encoders that supply movement inputs from the steering wheel of the vehicle to the controller. The control will start the motor when steering wheel is moved and ramp up the speed of the motor proportionally to the speed which the steering wheel is rotated. If no movement of the steering wheel is sensed after a pre-set time, the control will shut off the motor, to save energy, reduce noise and extend battery life.
- Voltage Range : 24-48VDC and 72-80VDC
- Armature Current Limit : 60 Amps
- One Hour Rating (In Air) : 15 Amps
- One Minute Rating : 35 Amps
- Frequency : Constant 15KHZ
Features and Benefits:
- Variable idle speed available to protect pump
- Variable steer compensation allows the use of custom sensors
- Variable relief enable allows operation without steer sensors
- A stop timer extends battery life
|
|
|
The device that maintains continuous power supply even on the absence of mains power supply is called UPS or Uninterrupted power supply. This is usually connected between the main source and the working system. It switches from the mains power supply to the battery power instantaneously whenever there is a fault in the mains power supply or the power supply is not there at all. It is generally used to protect typically computers, telecommunications equipment, and other electrical equipment where there is a chance of power failure. UPS are available from 200VA onwards to large systems which can support the power supply of multistoried buildings. It is typically the need of all data centers, and computer network systems. Sometimes in large systems it is used in conjunction with generators but it is not to be confused with standby generators. UPS are used for short and instantaneous power supply needs though for longer terms it may be used with a generator.
|
|
... see all the products in the category
UPSs
|
|
Motor control centers provide a convenient, centralized means of protecting and controlling all of a facility's motor loads.
|
|
Variable Speed Drives
GE Consumer & Industrial introduces a complete new line of feature packed drives.
|
|
|
... see all the products in the category
AC drives
|
|
|
see the results for the following category : 
