|
|
Chainflex® are the special cables for Energy Chain Systems® – tested, tested, tested and tested.
As a manufacturer of Energy Chains® and special Energy Chain® cables, igus® uses the possibility of testing many different types of chains and cables on a practice-oriented basis At the company-own technical training center in Cologne, numerous series of tests are carried out on a parallel basis under the most difficult conditions. At the present time, there are more than 35 test setups with their test results being summarized in databases. This extensive, current data pool provides precise, reliable information on the actual service life and is also the basis of new product developments at the company. The test data for Energy Chains® and cables, but also for ready-made systems, are, however, described in such detailed form that igus® confirms a functional guarantee for its Energy Chain Systems®.
|
|
|
Wire+Cable for the railway industry
|
|
ÖLFLEX® Connection and control cables
The flexible, oilproof connection and control cables, for universal use with the most demanding requirements.
For the mechanical engineering, machine tools, system and apparatus engineering.
Measuring, control, heating and air conditioning technology. For permanent connection or highly flexible for ground cables. Halogen-free or with international approbations.
For the most demanding requirements for electrical and mechanical properties.
ÖLFLEX® is a registered trademark of the Lapp Group in many countries, and the genuine product is therefore only available from Lapp.
|
|
Application:
- especially designed for shipbuilding and electric systems
- control panels
- signal systems
- sensor leads, solenoid valves, electromagnets
|
|
HUBER+SUHNER offers some standard cable systems which can be specifically modified for industry and installation applications. But mostly, systems are designed and produced according to the customer's specifications.
We offer:
- lighting systems for tunnels
- airfield lighting
- customer specific cable systems for machine building, apparatus engineering, sensor wiring, measurement devices, door systems, robotics, air conditioning
- other special applications
|
|
Reinforced cables with wires for low voltage power distribution.
Recommended for use in rooms with the risk of fire or explosion thanks to its explosionproof characteristics (ITC-BT-29) and in all places requiring mechanical cable protection or special tensile strength during laying.
The entire range of ARMIGRON-M UNFIRE cables are Non Flame-Propagating as per EN 50266 (corresponding to the international IEC60332-3). Their hydrocarbon resistance property makes them essential in environments in which the cable may undergo chemical attack from this type of compound.
As the 70 mm2 section inclusive, the SECTORFLEX configuration is offered with a flexible sectorial conductor that, with the same electrical properties and the same conventional terminals and accessories as circular cable, provides a lower cable diameter and weight that significantly increases its ease of handling and installation.
Maximum permanently-operating conductor temperature 90 ºC
|
|
Cables for power distribution for medium voltage outdoor, cased or underground installations.
Abrasion and tear-resistant jacket. Easier slide
Cable with lengthways shutter against water penetrating the shielding and conductor. Furthermore, radial shutter against accidental breakage of the jacket using aluminium-copolymer tape attached to it
|
|
Cables for power distribution for medium voltage outdoor, cased or underground installations.
Abrasion and tear-resistant jacket. Easier slide.
Reticulating process: The three extruded layers (semi-conductors and insulation) are extruded at the same time in a triple head. The tube is kept under controlled inert gas (N2) pressure to prevent the formation of vacuoles. The temperature profile of the tube is carefully controlled to ensure the correct level of reticulation in the cable core.
|
|
|
The Power Cables division covers all commonly used low- and medium voltage cables and the relevant accessories for energy supply networks, up to and including easy-to-install, environment-friendly cabling for cutting systems.
|
|
Characteristics: insulated cables in silicon, Teflon, FEP, MFA, PFA, PTFE, Tefzel, ETFE, XLPE, XLPO, glass fibre, mineral fibre, Kapton.
Applications : Electromechanical construction (cables and braided sleevings – classes B, F and H), wind power (Profilwind range), electrotechnical applications (zero-halogen cables), rail construction (Y 3000 S, Z 3000 SS, NY 500 SO), heavy industry, lighting. Reference standards: IEC 60332-1, IEC 60332-2, IEC 60332-3, IEC 60331, IEC 60754-1, IEC 60754-2, IEC 61034-1, IEC 61034-2, EN 50200, EN 50264, EN 50265, EN 50266, EN 50267, EN 50268, EN 50382, NFF 63827, NFC 32070
Brands: SILICABLE, SILIFLON, SILICOUL, SILIFLAM, PYRISOL, COUPLIX, SILIGAINE, SILITUBE, VARPREN, SILISOL, VEROX
|
|
The conductors in Ceander cable are made of copper or aluminium. Round conductors are normally used: single-wire up to 10 mm2 and multi-wire from 16 mm2 upwards. For larger cross-sections (150 + 240 mm2), single-wire sector-form aluminium conductors are also used. The conductor insulation is mainly made of cross-linked EPR.
Protection for people is provided by the concentric outer conductor (PEN conductor), applied in the form of a sinusoidal line. The electrical cross-connection is ensured by a copper band. Protection against corrosion is provided by a halogen-free black outer casing with two lengthwise yellow strips.
|
|
|
Combined energy and control cables for the machinery and construction industries as well as high-quality polyurethane cables for mining and tunneling applications - these are the key features in the range of products from our Industry division. The range also includes cables for salmon farms.
|
|
Features:
Flexible and tough jacket. Offers -50°C to 105°C temperature extremes. Seoprene offers excellent abrasion, ozone, sunlight, chemical and oil resistance as well as water and mold resistant non-wicking lightweight polypropylene fillers. Water resistant with high dielectric insulation. Lightweight, long lasting, easy to carry and easy to handle. All components are recyclable and non-hazardous for environmental landfill disposal. Color coded conductors for easy identification.
Applications:
Special uses requiring flexibility and mechanical toughness, high environmental resistance and flame retardance. Push button remote controls. Motor control, stage equipment and lighting. Industrial control and robotic systems. Outdoor applications. Suitable and approved for submersion in water.
|
|
|
Specifically designed for use in EMC-protected areas. EMC means Electro-Magnetic Compatibility. The optimal screening effect is achieved when these PURWIL® EMC cables (which include a special sheath) are used together with our EMC screwed joints.
|
|
|
|
|
|
Inter-8® Weave Cable has applications to many interference problems. Current-carrying conductors generating interference fields can be replaced with INTER-8 WEAVE cable to substantially reduce radiation. In low impedance circuits where external interference results in disturbing signals, Inter-8® Weave Cable will reduce the circuit sensitivity to the external fields. Among typical applications are cable connections to strain gages, thermocouples, photoelectric detectors, audio coils and transformers, piezoelectric transducers and preamplifiers.
SPIRA-SHIELD is flexible conduit that provides high permeability magnetic shielding for sensitive cables and conductors. Constructed of .010" thick CO-NETIC AA Alloy, SPIRA-SHIELD provides greater attenuation than braided sleeving and also furnishes physical protection. Among typical applications are ground support and communication equipment, shipboard control systems, audio-level interconnections, sensitive instrumentation and aerospace apparatus.
Co-Netic® Braided Sleeving, constructed of 36 or 34 AWG CO-NETIC AA high permeability wire, provides superior flexibility compared to foil that is spiral or channel wrapped around cable.
CO-NETIC AA wire in .005" diameter is widely used in magnetic shielding braid applied over cables. All gauges have applications where high permeability, low coercive force and ferromagnetic properties are required. CO-NETIC AA wire is corrosion resistant and has an affinity for solder. Meets MIL-N-14411, Composition I.
|
|
- Safe choice of cables -
understanding the needs of our customers´ applications, we offer the safety of the right cable matched to specific requirements.
- System compatibility -
the cable design can significantly influence the performance of the energy
and/or data supply system - we ensure the proper alignment of the cable to the system for optimum energy and data transfer.
- Producer independence -
only the performance of the cable is important to us, not its origin - we neutrally choose only the best cables available on the market.
- System guarantee -
each complete Conductix-Wampfler System is provided with a comprehensive guarantee - needless to say, including the cable.
- Conductix-Wampfler cable service -
the graded Conductix-Wampfler Services ensure the reliability of our systems and the availability of our customers’ equipment.
|
|
Characteristics: Flexible cables designed for immersion or submersion in all types of liquids.
Applications: Electrical power supplies for immersed pumps (soft water, wastewater, raw sewage, saltwater, chlorinated water, liquids and foodstuffs).
Brands: PROFIPLAST
|
|
Burglar Alarm Wire (Station Wire)
22/2 solid BC
22/4 solid BC
22/2 stranded (7/30) BC
22/4 stranded (7/30) BC
|
|
Supreme Twisted Premium Pump Cable Polar/Solar®
Features: Polar/Solar Compound
Put-Up: 1000' (06)
500' (05)
Color Code: Multi (30)
|
|
We offer you an extensive range of flexible power transmission components. Our diverse manufacturing processes facilitate the production of highly flexible braided cables matched to suit your specific application, ready-assembled connecting components or welded high-current connectors. From the smallest ground or earthing tapes up to high-current cables with 6000 mm² conductor cross-section – almost all conceivable applications are covered. Whether in air-cooled or water-cooled designs, we can offer you the right components and solutions.
Please contact us directly for technical support.
|
|
|
|
|
|
Even nowadays, conductors for MV cables to Swiss standards are made of braided round copper wires. The inner and outer cross-linked semiconductor is welded permanently with the XLPE insulation. For EPR insulation, on the other hand, the outer semiconductor is glued.
The screening is formed by the outer semiconductor layer, together with a layer of round copper wires. A suitable screening cross-section is assigned to each conductor cross-section. The copper wire screening is held together by a copper band, also ensuring the electrical cross-connection between the copper wires. Lengthwise water-tightness is guaranteed by embedding the copper sheath in expansion strips.
Protection against corrosion is provided by a halogen-free black outer casing with two lengthwise red stripes.
Three single conductor cables can be braided together to make a triple-conductor or triple-casing cable. If cable laying conditions are difficult, it is also possible to lap the cables with tensile and protective armouring which consists of a layer of galvanised flat steel wires.
|
|
Outstanding features:
halogen-free
no flame propagation
flame retardant and self-extinguishing
easy stripping
flexible
|
|
|
|
|
|
Cord Sets Custom Made in Germany Meet Demand for Low to Medium Quantities
More and more OEM manufacturers are finding difficulties sourcing certain components for custom applications due to the lack of producers who are willing to make small runs at a reasonable price.
With Engelking's cord set offering, it is now possible to source small to medium runs of cord sets in a wide variety of international connector combinations and cable types with the relevant approvals. As manufacture is located in Germany the short lead times and reduced transport and transaction costs can often compete well with products from the far east.
Additionally, renowned German quality means that customers can rely on complete testing and genuine approved products. For EU companies, this means a considerable risk reduction as there is no importer's liability risk to be carried by the buyer and no problems with foreign payments.
A full range of mains plugs to cover virtually any international type as well as cold and warm connectors are available. A range of extension cables is also available in colors to suit customer requirements.
Ansprechpartner:
Herr Thimo Hamma
Marketing & Sales
E-Mail: thimo.hamma@engelking.de
Telefon: +49 (7464) 9865-21
Fax: +49 (7464) 9865-71
|
|
|
|
|
|
More information can be seen by choosing in the menu on the left. If you would like to receive more specific information regarding our products, please contact us. If your company is in need of the highest quality of current conducting cables, Brouwer Metaal will be able to offer you the products you need. We offer many different current conducting cables, all with different qualities and characteristics, to ensure that you can find the righ cable for your purposes at Brouwer Metaal.
Our current conducting cables are extremely flexible, to make sure that you can use them for all the purposes that your business requires. Whether you are looking for cables for smaller electrical appliances or for large industrial machines, Brouwer Metaal will offer a great variety of superior current conducting cables.
As a major supplier of these products, Brouwer Metaal has years of experience in working with products made out of copper alloys and aluminium bronzes. Combining the experience of our employees with the newest technologies results in the production of current conducting cables that lives up to the highest standards necessary. In addition to current conducting cables, Brouwer Metaal makes air and water-cooled cables, welding weels, electrode caps, injection plungers, and much more.
|
|
Medium Voltage Power Cables up to 30 kV with XLPE-insulation
The XLPE-insulation possesses very good electrical, mechanical and thermal characteristics in medium voltage networks. This type of insulation is excellent chemical resistant and also resistant to cold. Due to various advantages, the XLPEinsulated type has vastly displaced the traditional classical paper insulated types in many sectors.
The XLPE-insulated medium voltage cables are designed with longitudinally water-proof. In comparison to PVC and paper-insulated cables, the advantages of XLPE-insulated medium voltage power cables are possessing a low dielectric factor.
The good properties of XLPE-insulated cables remain constant at a long temperature range. These cables can be laid in earth, in air or in tubes.
|
|
PUR Weld Cable
PUR Control Cable
Regulated Voltage / Medium Frequency Cable
Regulated Voltage Cable
Proportional Valve Cable
PUR Hybrid Cable
Interbus Hybrid Cable
IBS Cable Rugged Line
Special PUR Cable
PUR Hybrid Cable (Cable for Welding Control)
PUR Multi Bus Cable
|
|
|
|
