|
|
|
OMNIA Series, in surface mounting and flush mounting versions without protective devices, is designed for industrial use could also be used commercially with its attractive appearance and reduced size.
|
|
SCAME have further improved the performance and design of their wide range of industrial plugs and sockets that comply with IEC309 standard. special attention has been pait to the use of isolating materials and the treatment of metal components.
The outstanding mechanical characteristics of IEC309 Series plugs and sockets and their ability to withstand weathering and chemicals make them safe and reliable even in the most severe environmental conditions.
|
|
* Plugs and socket-outlets with an integral switching device
* Separated by simply pressing the latch
* 16 A - 63 A
* Up to 690 V AC and 250 V DC
* 1000V (no on-load disconnection)
* Automatic IP66/67 watertightness when connected without additional manipulation being necessary
* Silver butt contacts for optimum current transmission
* Socket-outlet safety shutter, no access to live parts
* Housing made of glass-fibre reinforced polyester, highly resistant to chemical agents, UV radiation, shocks, ...
* Extremely compact design
* Versions with auxiliary contacts
* 24 different keying positions
* IEC/EN 60309-1
* Load breaking capacity according to IEC/EN 60947-3, AC22/AC23
* In compliance with the European Low-Voltage Directive
|
|
* DECONTACTOR for motors, can be connected and disconnected under load
* 40 A - 125 A
* 3 to 30 kW
* Up to 690 V AC and 250 V DC
* Protection degree IP67 achieved when ring is turned (protection against dust penetration and temporary immersion in water)
* Can be locked in the ON and OFF position
* Silver butt contacts for optimum current transmission
* No access to live parts
* Housing made of anti-corrosion treated metal
providing high-temperature resistance and excellent mechanical resistance
* Versions with auxiliary contacts
* 24 different keying positions
* IEC/EN 60309-1
* Load-breaking capacity according to IEC/EN-60947-3, AC3 and AC23
* Conformity to the Machine Directive in terms of power supply isolator device
* American standard UL 98/508
* European Low-Voltage Directive
|
|
| ... products without technical information |
| |
|
a portable TRANSMITTING UNIT which communicates to the receiving unit, the sequence of digital data that is necessary for carrying out the command selected by the operator using the command devices (pushbuttons, selectors, joysticks).
|
|
|
The system consists of transmitter, receiver and battery charger and also includes the Listen Before Transmit feature allowing the Mito to automatically scan, find, and lock onto a clear and available frequency upon pressing of start button.
|
|
|
Control Chief has established a new standard in the wireless industrial control market. This radio is an outstanding value, featuring a compact, 8-button transmitter and a full compliment of safety features. The pre-wired receiver makes installation and setup simple.
|
|
We are manufacturer of radio modules and wireless remote controls. Our custom-made solutions fit perfectly for many applications in house and industry.
Our products feature a very high operating distance and a simple but powerful and very flexible concept for the control of up to 32 channels.
We can also deal with your special requests in order to solve your unique problem.
|
|
| ... products without technical information |
| |
High-pressure vulcanised polyethylene tubing - approved for contact with food products. Special material formula withstands even highly aggressive cleaning agents. The black variant is UV stabilised as well.
Variants and functions:
- Highly resistant to chemicals
- Approved for use in food processing
- Outstanding UV stability (black variants)
- Free of paint-wetting impairment substances
- Highly resistant to hydrolysis
- Temperature resistant from - 35 to + 80°C
|
|
This product is not suitable for CN and PK push-in fittings.
Polyurethane tubing is highly resistant to abrasion, pressure and wear, offers outstanding resistance to kinks, excellent tensile and tear propagation strength, very good cushioning capacity and temperature flexibility. It is also highly resistant to oil, grease, oxygen and ozone. Deformation is kept to a minimum even under long-term stress. Each of the different polyurethane types has different specific characteristics.
- Outside diameter per CETOP RP 54 P
- FDA food industry approval
- German Technical Control Board (TÜV) tested
- Halogen-free
- Hydrolysis resistant
- Microbe resistant
- Suitable connectors: QS, QS-F, CRQS, CK, CN
- Media: Compressed air and vacuum, Water (except potable water)
|
|
Type PFAN temperature and chemical resistant tubing. The high-end tubing which stands up to practically all ambient influences.
Variants and functions:
- Highly resistant to chemicals (even extremely pure acids)
- Temperature resistance: 20 to +150° C (unpressurised from 70 to 260° C)
- FDA approval §177.1550 for use in food processing, approved for contact with food products
- Excellent UV stability
- Flame retardant per UL 94 V0
- Colourless
- Free of paint wetting impairment substances
- No tendency to develop tears in the longitudinal direction (as opposed to Teflon)
|
|
| ... products without technical information |
| |
... see all the products in the category
Hoses
|
|
With well-established Bi-CMOS high frequency and CMOS analog module technology, Renesas Application Specific Standard Products (ASSP) has gained a high reputation from customers worldwide. Its mechanical-electronics and power management technology is also regarded essential for designing more compact and lightweight mobile devices. Renesas’s ASSP covers a broad range of applications such as audio, automotive, display, mobile communication, PC peripherals, USB and a lot more.
|
|
|
Fujitsu MB86628 KeyWave™ II Quad AFE incorporates four complete analog front ends, optimised for Central Office (CO) ADSL modems. The device integrates high resolution analog to digital converters (ADC) and digital to analog converters (DAC), which combined with active filtering significantly reduces the requirements placed on external components. The MB86628 KeyWave™ II Quad AFE is ideal for cost, power and board area sensitive CO equipment.
|
|
|
DirectCore and CompanionCore IP products with free evaluations complement the nonvolatile, secure, and low-power characteristics of Actel FPGAs while offering simple implementation with Actel's development tools. Design Services are available through Actel's Solution Partners.
|
|
today’s networks are evolving to keep pace with them. Now, thanks to Freescale’s MSC8144 quad-core digital signal processor, networks can start making greater strides into the future.
The movement to connect everything over Internet Protocol (IP) shifts the landscape for service providers, network-equipment makers and semiconductor suppliers. To enable converged services at carrier-class quality, IP networks require high-performance digital signal processors (DSPs) that can manage user traffic while reaching higher voice and video channel densities at an economical price.
|
|
|
RT - 100 optional Package that can be used for the calibration of Rotary Tables and the Rotary aces of blots some to 5 or 6 Aces. The operating field is of 360° with increments until 10 degrees. Precision 0,2 second of degree arc (0,06 millesimi). Automatic compensation for the assembly eccentricity. Portable Versione.economica and to motorized manual or automatic drive with servocontrol.
|
|
|
|
|
|
Features:
MarForm MFU 100 offers performance and possibilities in the reference class which in the past were only possible with much larger investments.
Thanks to its active air-conditioned cabin, the machine can also be used on the shop floor. Shorter distances and a faster intervention into the production process control reduce your costs and optimize the quality of your products.
A high degree of automation is achieved through themotorized centering and leveling table, which is a component of Formtesters, and the use of the motorized T7W probe.
Because of the complete separation of machine control and profile evaluation, the MFU 100 is easily expandable and ready for the future. The addition of other languages or special
evaluations is possible, as well as the implementation of new standards. The MFU 100 is already prepared for the use of new sensor technologies.
The MarWin software package offers all the features of a modern measurement and evaluation software. As a matter of course, impressive records and the electronic documentation on company networks are also available.
- Maximum measuring accuracy
- Software package MarWin
- Future-proof
|
|
| ... products without technical information |
| |
Who calibrated? What? When? What were the results? Plan, manage and document all your calibrations efficiently and safely by using Beamex's calibration software. In a Beamex calibration system the calibrator communicates seamlessly with calibration software.
Benefit from using Beamex calibration software:
* Easy-to-use, modern software
* Traceable and auditable calibration documents
* Paperless documentation
* Seamless communication with documenting calibrators
* Wide customization possibilities
* Extensive installation, training and after-sales services
|
|
Recently Scandura has widened its range of products, developing a solution that enables the customer to develop its customised calibration & test bench: SMCS, “Scandura Modular Calibration Solution”, its a bundle of solutions for the calibration of pneumatic, electro-pneumatic and electronic process instrumentation.
Customers can build up their solutions according to their requirements, choosing among more than forty modules developed to:
measure and generate pressure, vacuum, temperature and electrical signals,
provide power supplies and auxiliary services.
Build up your customised calibration & test bench directly on our website!
|
|
| ... products without technical information |
| |
|
|
|
|
Features:
- Lifetime Guarantee
- Compliant with the latest Brinell revisions for ASTM E10
- Brinell Test block surface is lapped and polished providing superior testing accuracy
- Special heat treat process insures maximum consistency and repeatability
- Brinell test blocks certified in our ISO/IEC 17025 accredited laboratory
- Easy to read grain free surface
- Highest quality de-carb free tool steel and aluminum
- In stock for immediate delivery
- ISO 6506 Accredited
- Test measurement equipment is calibrated and traceable to NIST
- Free long form test block certificate with NIST traceability
WESTport Brinell Master Test Blocks are used to calibrate portable, bench and production Brinell hardness testers. Each Brinell test block is heat treated in a computer-controlled vacuum heat treat furnace to insure maximum consistency and repeatability. They are then blanched; ground, hand lapped and diamond polished providing you with impressions that are easy to read with precision accuracy.
Brinell test blocks are calibrated with five impressions and certified in accordance to ASTM E-10 and ISO 6506 on hardness testers calibrated and traceable to NIST. The arithmetic mean of the five impressions is inscribed on the block both in BHN Hardness and diameter in millimeters. Each Brinell block is calibrated with Tungsten carbide indenters. HB30 designates 3000 kg / 10 mm ball - the most common Brinell scale, HB5 designates 500 kg /10 mm ball and HB15 designates 1500 kg / 10 mm ball.
|
|
| ... products without technical information |
| |
 see the results for the following category : Keyboards |
|
|
