|
|
Our new LV Series charging connectors represent the
consistent further development of our well-established
connectors of the LB and LB-L series.
LV Series connectors exceed the requirements of standard
EN 1175-1 and meet all current demands of manufacturers
and users of modern battery-powered machines and
systems, such as materials handling and lifting vehicles,
vehicle batteries, battery chargers, and backup systems
of uninterruptible power supplies.
The charging connectors are also available with the
option, as patented by Schaltbau, for batteries featuring a
commercial electrolyte circulation system.
Used with your products, our charging connectors ensure
the highest reliability and safety in any application under
harsh environmental conditions. Resistant to shock and
vibration as well as to the effects of dust, most acids,
alkalis and vapours, our charging connectors are designed
for daily use and have stood the test millionfold. A wide
range of accessories is available
|
|
From September 2008 Cabur products include a new family, CaburSolarLine, a full set of solutions for connections in photovoltaic systems. This product line has been designed to optimize connections between photovoltaic modules and some of the most common inverters on the market.
The product line includes connectors, cables, crimping tools and two practical "first installation kits", packaged in a professional toolbox.
|
|
The Han® K 3/0, Han® K 3/2 and Han® HC Modular series are designed as connectors for high-voltage and high-current applications.
The connector rating extended from 200 A to 650 A and 2000 V or 4000 V.
|
|
The Han Hv E® / Han® HvES series is designed for industrial applications up to 830 V.
Terminations offered are either crimp or screw types for Han Hv E® versions, or cage-clamp terminals in the Han® HvES inserts.
All inserts have a PE contact and also 2 additional last mate first break relay contacts.
|
|
FEATURES
* Streamlined design
* 3 hexagonal voltage coding pins for wet, dry/gel and air supply
* 2 main contacts, 4 auxiliary contacts, voltage key and air supply
BENEFITS
* Low mating forces and optional latching available
* Coding pins marked for 24V, 36V, 48V, 72V, 80V, and 96V provide additional safety and prevent cross voltage mating
* "A" series for American wire gauge cable
* "E" series for metric cable - intermatable with European competitive products
|
|
Wiring solutions for photovoltaic power systems, IP 65/IP 68
Pre-assembled, tested and ready-to-plug solutions, connecting cables with overmolded connectors with protection degree IP 68, module connection boxes in IP 65. For direct current up to 35 A.
|
|
The components of the MC-Plug connector system for photovoltaics are designed to permit time-saving, dependable series and parallel cabling of solar modules which are integrated into buildings and free-standing.
MC-PV Plug connector system permits pre-assembly of the PV modules at the factory or in a site workshop. The equipment from the inverter to the module can be installed quickly by skilled construction workers.
Benefit: Installation costs for these modules are cut sharply.
|
|
We manufacture earthing tapes and braided connectors in large and small quantities in standard designs as well as according to our
customers wishes. Different materials are at your disposal:
braided copper tapes
round stranded copper cables
PVC-insulated-copper cables
PVC-insulated braided copper tapes
silicone insulated copper cables
TPE-U insulated copper cables
welding cables and earthing ropes
braided stainless steel ropes
braided aluminium tapes
|
|
High quality and competitive price:
KINTO is one of the leading suppliers in China specialized in manufacture of copper parts for electrical applications.
Product range:
- copper flexible connectors made out of copper strips
- copper flexible connectors made out of baided tapes or stranded ropes
- flexible insulated busbars
- primary copper contacts (contact fingers, contact blades, tulip type contacts, bell type contacts, sleeve type contacts,...)
- primary copper connectors
- copper clamps and other customer copper parts
We use technologies such as press-/diffusion welding, braze welding, cold-pressing, stamping, deep-drawing and high precision machining.
The contact areas can be zinned or silver-coated according to customers' requirements.
We are a ISO9001 certificated company with strict quality assurance system, and we have advanced production and testing equipments to assure the quality of each product.
|
|
|
|
|
|
The Ex plug-and-socket connector "mini CLIX" from R. STAHL is especially uncomplicated and can be used in a multitude of applications. It's possible to carry installation and maintenance tasks in Zones 1 & 2, 21 & 22 without first obtaining "hot works" permissions. Hot Swap - plug-in and plug-out while energized - is now even possible for non-intrinsically-safe circuits. Can be used even for fieldbus installation because of the high transmission rate of 100 MBit/s.
Handling:
safe, fast disconnection under load
no specialist personnel required
no hot work permission required
coded to prevent confusion
Cable terminal:
crimp terminal or spring clamp terminal
direct connection via led-out single conductors
option for connection of armoured cables
Data transmission:
up to 100 MBit/s
perfectly shielded
option for additional power supply
Advantages:
suitable for high data rates
can be installed and maintained conveniently
no need to switch off the entire fieldbus system in the case of repair
easy modification and conversion
y-adapter for looping through data and power supply lines
Flexibility:
clear, fast installation
modifications to the connections or terminals can be made at any time
option for extension of electrical installations during operation
easy disconnection of individual areas
Installation:
simply screw into existing openings and wire
|
|
FEATURES
* High 300A current rating
* Mates with .125" flat bus bar blade
* Hot pluggable contact
* UL and CUR recognized
BENEFITS
* Small size provides dense power packaging
* Simplifies construction and lowers cost
* Supports hot swapping on 48 volt DC bus
* Product safety and electrical performance has been verified to the highest standards
|
|
|
Fischer high voltage connectors are available in various body styles and sizes. To avoid unintentional disconnection, plugs can be engineered with an integral safety locking ring.
|
|
|
The single-pin High Voltage Connectors of Series-100 enable improved application-flexibility by providing different metric cable-glands. The cylindrical wedging results in a crucial improvement for screen connections. Series-100 is designed for operating voltages up to 100 kV DC and is available in 25 A or 50 A versions.
|
|
|
Series-VarioPro is based on an entirely variable assembly concept of fully compatible elements. All versions of this miniature High Voltage Connector share the same POM or PTFE insulation sleeve-design enabling combinations of up to 3 contacts per connection. Series-VarioPro resists operating voltages up to 11 kV DC / 13 A and provides excellent performance and flexibility at minimal space requirements, easy maintenance and a high safety standard.
|
|
|
The multi-pin High Voltage Connectors of Series-M are anchored in a firm screw-housing, designed for operating voltages up to 15 kV DC / 30 A and can be equipped with up to 9 coded contacts. Both sides of the connection can be configured as plug or socket while cable-sockets can be angled and equipped with an EMC-gland bushing. One or more leading contacts can be assigned to execute a starting sequence, an earth connection or confirm a safety loop.
|
|
|
The single-pin High Voltage Connectors of Series-S are designed for operating voltages up to 40 kV DC / 25 A. Some types contain mounting plates in order to facilitate installation and structuring. Furthermore the connection of a shield is possible.
|
|
Series-MC represents our latest generation of multi-pin High Voltage Connectors. Substantially reduced in size and weight these HV-Connectors withstand operating voltages up to 10 kV DC / 13 A. They can be equipped with up to 5 contacts. Contacts can be crimped or soldered and are suitable for diverse cable diameters. Both sides of the connection can be configured as plug or socket while cable side is equipped with an EMC-gland bushing for sealing and screen-connection.
Type SB MC 520 has extended and heat resistant PTFE insulation sleeves and is the latest design of this series. The connection can handle an operating voltage of up to 20 kV DC / 13 A and is also suitable for applications with pulsed high voltage.
|
|
• Ratings to 16A, 250V ac
• IEC60320 style inlets/outlets
• Fused versions
• Illuminated and non-illuminated switch options
• Flange or snap to panel fixing
• Wide choice of terminals
• RoHS compliant
|
|
With over 26,000 combinations Bulgin’s Polysnap mains power inlet modules offer a very adaptable and flexible solution to panel design.
Polysnap allow combinations of mains inlets and outlets, filtered inlets, switches, fuseholders, voltage selectors, indicators and circuit breakers mounted in either horizontal or vertical format bezels ready for quick snap-fit assembly. The compact design occupies the minimum of panel area and a single rectangular mounting hole, offering easy installation for this mains power entry module.
To complement Polysnap the Polyflange range offers a flange fixing alternative for designers who prefer the security of screw fixing.
All types and variations are available through Bulgin’s extensive distribution network.
|
|
A full range of quality mains rated inlets, outlets and connectors conforming to IEC and EN 60320 specifications carrying UL, CSA, VDE and other approvals. With electrical ratings up to 20A, 250V (UL) these connector ranges offer solutions to most mains powered equipment and cable applications. The combinations of mounting styles and terminations include: flange fixing, snap to panel and PCB mounting versions together with 2.8/solder tabs, 4.8 and 6.3 faston tabs, screw terminal and PC spill versions. Completing the range are insulating boots, retaining clips and safety covers.
In addition to the standard black moulding, most styles are also available in either white or grey and special colours to match OEM equipment can also be supplied.
|
|
EN60320 inlets range from Bulgin Components is specified for use in all types of electrical equipments, and has an impressive list of international approvals.
The standard range offers one of the most comprehensive range of the market.
Variants offered include: flange and snap-in type, PCB mounting, fused inlets, with or without filters, hot condition types, and inlets with integral suppression and capacitors.
To complement the range, appliance outlets to IEC320.2.2 are available with various mounting options and termination styles.
Mating connectors in rewirable and cordset form complete the range.
|
|
|
Power supply connectors e.g. according to DIN 45323 and JEITA RC-5320A. Wide range of parts, 1.7- 7.0 mm diameter. For low load currents up to 3 A at 34 V DC.
|
|
The HiPro HV-Module presents a major improvement to high voltage modular connection systems. Crimp contacts provide the possibility of connecting conductors with different wire gauges, increasing the modules applicability. The Module is designed to withsatnd voltages up to 18 kV DC and a 30 A current load and increases the variety of possibilities for custom-application industrial connectors.
Find more information on the datasheet and on www.ges-electronic.de
|
|
Marechal Electric multicontact plugs and socket-outlets are used to signal and control purposes. They convey information (power) and signals (low voltage). Automatically watertight IP66/IP67, their metal casings guarantee an excellente resistance to shocks, corrosion and high temperatures: from -25 °C to +40 °C.
With the same butt-contact technology, the complete range of connectors from 6 to 37 contacts is compact and provides a high eletrical performance.
They are specially designed to combine low currents and high current contacts: telephone line connections, wastewater treatment, town equipment, emergency vehicles...
|
|
The new SPeX connector, is an EX power connector (1000 V, 680 A) with ‘e’ increased safety enables the user to connect and disconnect heavy duty equipment simply and safely.
Designed for use in hazardous areas the SPeX is ATEX 94/9/CE approved for zones 1 & 2 (gas) and zones 21 & 22 (dust). It offers automatic IP66/IP67 ingress protection rating as soon as the plug is inserted into the socket. Electromechanical interlocking is provided via a microswitch (which opens and closes all phases simultaneously) to protect the user and to prevent electrical destabilisation of equipment.
The casing is manufactured in glassfibre-reinforced polyester which affords excellent mechanical protection (IK08) and resistance to UV and chemical agents.
Typical applications include mobile gensets, ship-to-shore supplies, mines, offshore platforms etc.
The incorrect mating of phases is mechanically impossible. Furthermore colour-coding enables a visual check.
|
|
BradPower is a robust, scalable and easy-to-install power distribution system that does not require the specialized tools and labor typically associated with traditional conduit or raceway installations.
BradPower wiring systems modular components make installation faster, easier, and more reliable. BradPower products deliver the same unsurpassed performance and innovation the industry has come to expect.
The BradPower product line includes:
Cordsets and Connectors
Tees and Reducers
Receptacles
Disconnect Switches
Accessories
BradPower Solutions for food and beverage processors: To meet the unique needs of the food and beverage industry, we offer a complete range of specialized BradPower modular power components designed for use in food and beverage processing machines and automated cleaning systems.
|
|
FEATURES
* High performance #16 contact
* Mechanical polarized housings
* PCB, panel or cable mounting
* Optional positive latches and back shells
* Optional sequential contact mating
BENEFITS
* Rated to 30 amps per IEC512-3 test 5a
* Housings only mate one-way, ensuring proper circuit mating
* Product flexibility for a wide variety of system packaging
* Provides additional safety and security
* Up to 4 pin contact lengths can be specified to create Make First / Break Last and Make Last / Break First circuits
|
|
|
|
|
|
Lucy Switchgear has in depth knowledge in providing substation connectors up to 145kV and accessories.
Designed to interface with all associated products including circuit breakers, disconnectors, voltage transformers and sealing ends, our connectors are ideal for new build and refurbishment projects.
Connectors Key Features
Connections up to 145kV
Copper connections to ENA TS 41-16
Aluminium connections to ENA TS 41-11
Rigid to palm connector ref. RD-PALM
Rigid Connector to suit Copper/Aluminium Conductor to Flat Palm.
Number of clamps per connector dependant on current rating or mechanical requirements. Triple clamps only used for aluminium stranded conductor.
Angle of entry and splay to be advised at time of quotation or order.
Conductor clamps
- C14 to C75 clamps are electro tinned CZ122 brass
- A40 to A90 clamps are LM6 aluminium
- UC25 universal clamps are to suit copper or aluminium stranded conductor.
CZ122 brass/HE30T aluminium
- Transition washers will be used if aluminium clamps to copper support plate or brass/gunmetal clamps to aluminium support plate are required
|
|
|
|
|
|
FEATURES
* 210 to 450 amps UL rating
* Positive latching
* Available in straight, right angle, panel mount, blind mate and bus bar styles
* Touch safe female connectors
* Polarized dual pole connectors with optional hex key
* Strain relief option
* Low connector mating forces
* Silver plated, high conductivity contacts
* Ease of assembly
BENEFITS
* Integral latches with ergonomic release provide over 50 lbs retention
* The flexibility of the PowerMod HP system serves a broad range of electronics applications
* Provide IP20 protection for safe, energized use outside the electronics cabinet
* Dual pole housings prevent shorting from reverse mating and the optional hex key allows the user to create unique mating schemes
* Reduces risk of wire insulation creep and reduces transmission of wire loads to contacts improving service life
* Connectors are easily mated and unmated
* Offers greater longevity for high-power, elevated temperature applications
* Intuitive design allows for simplicity of assembly
|
|
FEATURES
* Flat wiping contact system
* Interchangeable Genderless design
* Colored, Modular housings
* Polarized housings
* Wide product range - From 10 amps through 180 amps
* UL94 V-0 housing material
|
|
|
|
