|
|
C-FRAME PRESS WITH ELECTRIC CYLINDER
From 30 to 500 kN
Suitable for precision control
this press embedded with an absolute encorder and an efforts controller. A display allows the visualization and the management of the press parameters, authorizing a diversity of controls.
Reserved to centered load works, specifically tailored to operations requiring controls of positioning and efforts extremely precise for, mould closing, crimping, assembly, cutting, stamping, forming ans so on....
|
|
The press includes a force sensor and a motion sensor that allows to check those
two parameters all along the stroke.
A pretty interface allows to add or modify programs.
It is also easy to manage differents product families.
|
|
TOX-Presses with servo-drive TOX-ElectricDrive
Tailored drives from 0,5 – 400 kN.
The modular concept of our presses: from the standard press up to the individual plant – everything is possible. Rugged and economic, long-lived and versatile, CE-conform and in line with UVV (German Accident Prevention Regulations), including comprehensive accessories. Type-tested safety controls and process monitoring systems – everything is available.
When work processes require high flexibility and precision, then conventional drives are often no longer sufficient. This calls for the use of electromechanical servo drives.
The drive variant TOX-ElectricDrive has a most-precise mechanics and user-friendly software
From the standard drive up to the complex special machine.
|
|
SOCOPRESSES is with same, in partnership with you, to write the schedule of conditions related to a problem arising.
The selected technical solutions will be validated either by tests, or by preproductions on prototype tools.
|
|
The electric press with the advantage from its design of obtaining instructions of precise stop.
On request the instructions will be treated in "closed loop of control" for a highher degree of accuracy.
|
|
The electric press with the advantage from its design of integrating out of standard of the instructions of effort or displacement.
On request, the instructions will be treated in "closed loop of control" for a highher degree of accuracy.
|
|
Use:
This electric press carries out assembly (40 kN)
Control efforts of hafting.
Practical:
Drawer 2 positions.
|
|
| ... products without technical information |
| |
The SAFAN E-Brake produces the most accurate and constant bending angles along the entire working length of the press-brake without the need for crowning. The unique, patented roller drive system in the upper beam ensures a uniform and direct distribution of forces. The servo-electronic drive with fast start and stop times allows for bending speeds of up to 20 mm/sec. The integration of this drive, combined with the SAFAN Touch Screen control panel and the safety light screen, cycle times are typically cut by 30%. In addition, the machine consumes up to 50% less energy.
Environmentally friendly technology without oil, low-noise operation and maximum ergonomics are the SAFAN E-Brake's other strengths. The machine comes with a unique, innovative backgauge system as a standard, which can be very accurately controlled and used on the entire working width.
|
|
TOX-Presses with servo-drive TOX-ElectricDrive
Tailored drives from 0,5 – 400 kN.
The modular concept of our presses: from the standard press up to the individual plant – everything is possible. Rugged and economic, long-lived and versatile, CE-conform and in line with UVV (German Accident Prevention Regulations), including comprehensive accessories. Type-tested safety controls and process monitoring systems – everything is available.
When work processes require high flexibility and precision, then conventional drives are often no longer sufficient. This calls for the use of electromechanical servo drives.
The drive variant TOX-ElectricDrive has a most-precise mechanics and user-friendly software
From the standard drive up to the complex special machine.
|
|
|
|
|
|
ERmet : Modular Pressfit Tools: For Male Connectors
ERmet connectors can be end to end mounted in modular layout. To be able to pressfit the selected connector layout for your application in a rationalized way, we have designed the necessary pressfit tools to be modular too. This is true of the tools both for male connectors and for female connectors. The tool bases, also termed anvils, are fixed in a tool holder. Each connector module requires an appropriately sized tool module.
The standard tool holders are designed for two 50 mm modules (modules A, B, L and M), pressfitting a total module length of 100 mm. Due to the modular tool configuration, pressfitting can be carried out in any order. Using filler elements, it is also possible to pressfit just individual modules.
ERmet : Modular Pressfit Tools: For Female Connectors
ERmet connectors can be end to end mounted in modular layout. To be able to pressfit the selected connector layout for your application in a rationalized way, we have designed the necessary pressfit tools to be modular too. This is true of the tools both for male connectors and for female connectors. The tool bases, also termed anvils, are fixed in a tool holder. Each connector module requires an appropriately sized tool module.
The standard tool holders are designed for two 50 mm modules (modules A, B, L and M), pressfitting a total module length of 100 mm. Due to the modular tool configuration, pressfitting can be carried out in any order. Using filler elements, it is also possible to pressfit just individual modules.
|
|
|
|
|
|
ERmet : Modular Pressfit Tools: For Male Connectors
ERmet connectors can be end to end mounted in modular layout. To be able to pressfit the selected connector layout for your application in a rationalized way, we have designed the necessary pressfit tools to be modular too. This is true of the tools both for male connectors and for female connectors. The tool bases, also termed anvils, are fixed in a tool holder. Each connector module requires an appropriately sized tool module.
The standard tool holders are designed for two 50 mm modules (modules A, B, L and M), pressfitting a total module length of 100 mm. Due to the modular tool configuration, pressfitting can be carried out in any order. Using filler elements, it is also possible to pressfit just individual modules.
ERmet : Modular Pressfit Tools: For Female Connectors
ERmet connectors can be end to end mounted in modular layout. To be able to pressfit the selected connector layout for your application in a rationalized way, we have designed the necessary pressfit tools to be modular too. This is true of the tools both for male connectors and for female connectors. The tool bases, also termed anvils, are fixed in a tool holder. Each connector module requires an appropriately sized tool module.
The standard tool holders are designed for two 50 mm modules (modules A, B, L and M), pressfitting a total module length of 100 mm. Due to the modular tool configuration, pressfitting can be carried out in any order. Using filler elements, it is also possible to pressfit just individual modules.
|
|
The GPO-Trucks are heavy-load lifting carts with the added capabilities of a rigid chain system for horizontal transfer positioning. They are available in a variety of standard models and can be custom designed to fit individual application needs.
* die Xchange time 15 mn
* many options ans accessories
* accurate, repeatable positioning
* built-in safety mechanism, movements are monitored via optical sensors
|
|
This specially designed die change lift-truck can be used for multipurpose applications in press shops. It serves as a die change facility directly in front of the press table. It is designed as an electric motor-driven transporter for dies and is used effectively as a floor vehicle in the die stores.
By lowering in a coupling, the front of the carrying forks is docked with the press bed for the purpose of transferring dies in loading and unloading operations. The integrated rollway is activated automatically for the purpose of safe and reliable transfer of the dies.
|
|
Pressure capacity: from 500N (50Kg) up to 120KN
(12,000Kg)
Position repeatability: +-0.005mm
Sensor function: Set position stop, Set load stop, Set
distance stop,
Const. Load / Set Timed Stop
Const. Load / Set Stop Position
External input/output: 17 input, 16 output
|
|
|
|
