|
|
HSP Handheld Screwdriver
with automatic feed system for screws and headless pins
- Compact and ergonomic design
- Automatic bit stroke
- Short changeover times
- Maximum flexibility
|
|
Designed for the Electronic industry and General Industry, the DOGA electric screwdrivers provide you with a wide range of torque (from 0,08 to 4,41 Nm) and rotation speed selection.
Dependng on your needs, models with or without controller are available.
|
|
The revolutionary ergonomic design along with the soft grip handle minimises grip force to provide maximum operator comfort and increase productivity
CP Industrial screwdrivers:
These tools are suitable for high production rates such as those on production/ assembly lines, where high durability is required and the tools are used frequently. Our industrial tools combine the best of quality, durability and ergonomics for your most demanding applications.
CP RediPower screwdrivers:
RediPower tools are suitable where the tool is used intermittently for industrial maintenance or non-intensive production.
|
|
|
|
|
|
EC-Screwdriver Spindles Micromat™-E/Minimat™-E
The brushless Electric Screwdriver Spindles with
torque ranges between 0.03 - 4.2 Nm
The EC Screwdriver Spindles allow free programming of the screw tightening process. Within the power range of the selected spindle, the torque value, speed, stand-by and direction of rotation can be adjusted individually to the assembly requirement.
When using these spindles in Robot applications, i.e. in our assembly cell "DCAM", different screwdriving sequences on different screw locations may be achieved within one assembly cycle.
The brushless electric motors provide nearly maintenance-free operation. They are ideally suited for the tightening of screws due to their outstanding dynamics and an achievement of high peak torque values.
Integrated monitoring of torque and angle values allow the exact control of the screw tightening process, as well as the documentation of all important process parameters.
The operation of the screwdriver spindle requires a programmable sequence controller (AST10) with integrated amplifier and a motor cable (available in different lengths).
|
|
|
|
|
|
The electrical screwdrivers from Weidmüller are ideal one-handed tools due to their ergonomic design. They ensure fatigue-proof working in any direction of installation. They feature automatic torque limits and high repeating accuracy.
DMS 3 Rechargeable torque screwdriver
One-hand operation under all working conditions
Switchable to clockwise and counter-clockwise rotation
Two speeds: 200 and 400 rpm
Torque settings approx. 0.2...3 Nm in 6 steps
Consistent performance until complete discharge of battery
Handle swings easily from pistol to rod form
Takes 1/4" bits held by ball-bearing clamping mechanism
Safety lock prevents accidental switch-on
Easy to change from battery drive to hand-operation up to 15Nm
DMS 2 Electrical screwdriver
Torque can be adjusted in four steps, assigned for standard screws M2.5 to 4
Selectable electric switch-off on reaching the preset torque
High repeating accuracy
Start-up with search mode and/or switch to working torque is controlled via the contact pressure on to the screw head
Switchable to clockwise and counter-clockwise rotation
Fatigue-free working due to ergonomic design and low weight
Ideal design allows one-handed operation in all working conditions and at different working locations
Low noise
Low energy consumption
|
|
Model: BSS 18 Li
• Compact, well balanced impact driver
• Long stack motor for extra durability
• 155 Nm maximum torque
• Industrial magnesium gearbox for extended life
• Delivers up to 3100 impacts per minute for increased productivity
• ¼” Hex bit reception
• Built in LED illuminates work surface
• Powerful fade free lithium-ion 18 volt power pack
|
|
The SSB range has been developed to meet the needs for a high quality cordless screwdriver specifically for the industrial user.
Reliable, Quality, industrial screwdrivers:
- More than 200,000 operating cycles service interval
- Machined planetary gearbox components and quality needle roller bearings for full industrial use
- Accurate and fast clutch operation guarantees torque consistency and lower reaction forces, even at lower battery power levels
- Full UL certification on entire range
|
|
Model: S 4000 E
• Powerful 720 watt motor for increased productivity
• Compact high speed screwdriver for drywall applications
• Full metal gearbox for durability
• Easily adjustable depth-setting nosepiece for consistent fastener depth
• Forward and reverse mechanism
• Ergonomic design and Soft-grip for comfortable handling
• ¼” hex bit reception
• Belt clip
|
|
|
The new L, LT and LTX-class cordless range are masters of their trade. There are many reasons for this: They are high-performance machines and extraordinarily light and compact. The new gear concept with its innovative torque clutch makes a wider range of applications possible, as the adjustable torque range has been virtually doubled. Thanks to our new motor & battery concept we have been able to make the machines more compact and even more powerful. We have also managed to protect your investment and increase service life through our new electronic single cell protection (ESCP) system which protects the battery pack and the machine from overloading. Our tried-and-tested AIR COOLED charging technology means the battery packs are, as usual, charged gently and quickly. Born through design to give you tools you can trust. For added piece of mind we now provide a three-year warranty on all machines, batteries, chucks and chargers.
|
|
- Lightweight for fatigue-free work
- Variospeed (V) electronics for infinitely variable speed change
- 20-level adjustable torque, plus drilling level
- Motor with integrated air cooling
- Quick stop for rapid fastening of screws
- Spindle stop for manual turning and loosening of screws
- Spindle with hexagon recess for screwdriver bits
- Integrated working light for good vision even in dark corners
- Pistol grip for optimum power transmission in direction of drilling
- Sturdy die cast gearbox housing for long service life
|
|
NITTO KOHKI "Delvo" Electric Screwdrivers are high quality tools for professional use, with special emphasis on precise control of torque and long life.
They apply just the correct amount of torque - with sure, positive control always at your fingertips. They are also smooth and shockless in operation, reducing the risk of operator RSI (Repetitive Strain Injuries).
Various types are available to provide controlled torque screwing in ranges from 0.02 Nm to 10 Nm. These drivers are fully supported with accessories for calibrating or setting torques, screw pick-up, and screw counting.
With BalTec’s customer-orientated service and support system we ensure that you are able to use "Delvo" electric screwdrivers with confidence.
|
|
For a faster productive process: this is the new feeding system NCA, completely designed by Fiam.
The tightening system NCA is particularly suitable for large and mediumbatch of equal screws; it offers the following important benefits:
- the screw is automatically sent from the bowl to the screwdriver head;
- the screw is automatically positioned on the workpiece at the same time as the screwdriver is operating.
The work cycle is simple, fast and safe:
- the screws are loaded in the bowl
- the screwdriver is operated
- the screw automatically arrives at the screwdriver head
- the screw is drawn in
- another screw arrives at the screwdriver head, is drawn in and sothe cycle continues
|
|
Lighter, Faster, More Powerful
- Torque range: 0.6 to 18 Nm (0.4 to 13 ft-lb)
- All models are under 2 lbs. and less than 12" long
- Push-to-Start Models include headlights
- Long life, lightweight cable has quick disconnect
QPM Threaded Fastening Systems Deliver Value Over Their Entire Lifecycle
- Any Stanley QPM Controller can operate tools from the entire range from < 1 to 2000 Nm
- Ethernet, DeviceNet, Profibus, 24V I/O and software options fit your plant interface requirements
- Stanley “Adaptive Tightening Control” technology improves quality by automatically adjusting for joint variability
- Programmable buttons provide process control options at the tool
- Fastening status LEDs, visible from either side of the tool, and a programmable buzzer signals the operator about assembly quality
|
|
|
|
|
|
Loose bolts, leaks and defect components stand for a large part of recall and rework costs in the manufacturing industry today. Many of these can easily be avoided by choosing the correct tightening solution. Atlas Copco offers a full range of DC controlled tools that support ‘Right first time’ to enable the first step to a cost efficient and lean assembly process with zero defects.
The Tensor nutrunners and screwdrivers have been used in the automotive, offroad, aerospace and appliance industries since the mid 1980's. They are known for their unbeaten productivity and reliability as well as built-in error proofing capabilities.
The latest generation of controlled tools is the Tensor ST/SL that offers market leading productivity, process integration and complete traceability back to each and every tightened bolt. For quality critical applications that do not require documented torque results, Tensor DS/DL offers highest productivity based on the patented DigiTork control method.
The Tensor ranges span from 0,3 Nm to 4000 Nm in pistol-grip, inline or right angle configurations, to cover all customer needs.
The increasing quality demands in the electronics industry also require more tightening intelligence to achieve stable product quality. Atlas Copco offers a dedicated range of screwdrivers, MicroTorque™, from 0,5Ncm to 800Ncm. MicroTorque™ screwdrivers are available in different functionality levels and configuration to meet all customer needs.
|
|
Performance
The power-to-speed and power-to-weight ratio exceed every other direct drive power tool manufacutured today
Precision
The magneto-elastic transducers are ten times more responsive than typical strain gauges
Speed
Remains efficient even when your application calls for multiple fasteners
Lightweight
20 - 40% lighter than the competition, size for size
Versatile
A wide range of DC fastening tools is available in pistol grip, in-line, angle, and tubenut configurations
|
|
The Plug and Tighten tool is an electric brushless tightening tool directly plugged on the 110/230 Volt power supply.
Torque Range:
- Angle Head tools: 3 to 65Nm
- In line tools: 3 to 43Nm
The control is performed with a built-in digital torque transducer: Tested to ISO5393.
Quality of tightening and Traceability
- Torque shut off
- Torque shut off with angle monitoring
Easy to set up and tamper proof programming, either directly on tool with the display and keypad or from a pocket pcGroup picture P&T angle head
Very low Life Cycle Cost (LCC):
- Maximum energy consumption: 50 watts/hour
- Maintenance free brushless motor
- Gear box tested at more than 2 million cycles
Ergonomics:
- Low weight, low noise, low torque reaction
|
|
Stall-type nutrunners consist of an air motor
connected to the output spindle by planetary gearing
and angle heads. In operation, the tool runs down
the fastener until the torque resistance in the
fastener causes the tool to stall. When the tool stalls,
the throttle is released by the operator and the tool is
removed. Stall-type tools can produce accurate
torques, especially on applications with varying
torque rates
|
|
| ... products without technical information |
| |
|
|
see the results for the following category :