|
|
The new series of servo motors SM2A with integrated motor can be easily programmed through EVER's windows PC based user friendly development environment called ATOMIC.
The SM2A series are constructed with a high protection degree of IP65 and are equipped with reliable connectors. Other features are: AC power supply, fieldbus CANbus or serial RS232/485, optoisolated inputs and outputs, an encoder for the closed loop control of torque, velocity and position (optional), The motor section is made of magnetic Low Loss material and has a holding torque from 3,4 to 12,5 Nm.
|
|
No cogging or preferred rotor position
No iron losses
Extremely low current consumption
Low audible and electrical noise
Extremely light and compact
Smooth and accurate speed, position, and torque control
Low vibration
Speeds up to 100,000 rpm
Electronic commutation for extremely long operational lifetime
High precision gearboxes available in all sizes
Feedback components available in all sizes
Control electronics available for all motor series
Custom systems available from design to production
|
|
Compared to a solution with servo amplifiers located in a central cabinet, decentral compact servo drives offer some advantages:
* Lower cabeling effort
* Smaller cabinet
* Minimizing of error sources
* Commissioning is faster and more simple
* Lower price because of integration
ECOMPACT is based on our well-proven ECOSTEP motors series 23S. ECOMPACT features digital current, speed, and position control. Comprehensive motion control functionality is integrated. Parameterization and setpoint setting via CANopen.
|
|
# Peripheral operation, minimized installation needs
# Versions for operation at 24VDC and 48VDC
# Compact and powerful design
# Versions with CANopen interface acc. to CiA DSP 402 V2.0
# Versions with incremental output 1024/rev. RS422 A-,B-,Z-signal
# Dynamic speed control and positioning
# To combine with planetary gear GPK45/55 (1-, 2-stages; up to i=49:1)
# Parking brake available
# High protection class IP54 (IP65 as an option)
# Maintenance free and robust
# Customer specific design
|
|
|
|
|
|
Integral, high torque density servo drive with Canopen interface and absolute multiturn positioning.
Universal 350 and 550 Vdc bus supply
2.5-9 Nm torque, 5000 rpm max
Multi axes machines
Direct drive without gearbox
Intrinsic multiple electric gear
Built in single turn and multi turn 4096 turn + 16 bit absolute encoder, 1 arcmin accuracy
No zeroing cycles
CanOpen DS301, DSP402v2.0 compatible
Double insulation
Built in RFI filter, Class B
IP 68 protection
The new TorqueWire series of integral servo systems creates a different approach to complex automatic machinery architecture. Torquewire motors are complete, self sufficient servo axis building blocks which allow the design, integration and operation of large multi axis systems with minimum hardware and surprising ease.
The TorqueWire motor systems consist of an advanced, high performance rare earth brushless servo motor, a DSP based, high voltage interpolating servo drive and a single or multi turn absolute encoder, all assembled in a very compact IP 68 protected frame.
|
|
PANdrive PD-163-42
Description
42mm BLDC motor with integrated controller/driver
The PD-163-42 is a full mechatronic solution including a 42mm brushless DC motor (NEMA17). It combines a convenient BLDC controller/driver electronic (TMCM-163-42) with a range of different motor types with internal HALL sensors. The PD-163-42 offers two motor torque options and can be controlled via RS232 or RS485 interface. The power supply is connected via flat connectors and the interface and the multi-purpose I/Os can be connected via high density JST connectors. It integrates a position regulator and a ramp generator. The integrated ramp generator provides for parameterized smooth positioning and supports an external switch as an absolute position reference.
|
|
|
The family with success of the drives of FlexiDrive positioning was lately supplemented by a new compact alternative MSIA. This alternative delivers, in discontinuous service, up to 238 W for a depth of assembly of only 245 mm reducing included/understood, and can be equipped with radial or axial connectors of exit.
|
|
|
|
|
|
Three-phase geared motors
Popular geared motors with constant speed and high functionality; power range 0.06 to 45 kW; output torques of up to 9,000 Nm
Detailed information
Geared motors - inverter variable speed drives
Popular industrial geared motors combined with electrical adjustment via 8200 motec frequency inverter; power range 0.25 to 7.5 kW; the distributed drive solution
Detailed information
Geared motors - electronic starter
Popular industrial geared motors combined with the electronic starter starttec; power range 0.25 to 4.0 kW; the distributed drive solution
Detailed information
Geared servo motors
Highly dynamic geared servo motors with synchronous and asynchronous servo motors; max. torque: 7 - 9,000 Nm; low backlash
Detailed information
Gearboxes - with shaft or flange input
Speed reduction gearboxes with free shaft or IEC flange at the input side suitable for motors to IEC 72; output torques of up to 9,000 Nm; finely stepped output speeds
Detailed information
Geared motors - mechanical belt adjustment
Popular industrial geared motors combined with mechanical adjustment via Simplabelt compact units; power range 0.25 to 45.0 kW; adjustment range 1:6
Detailed information
Geared motors - mechanical adjustment Disco
Popular industrial geared motors combined with mechanical adjustment via Disco variable speed drive; power range 0.25 to 7.5 kW; adjustment range 1:6
Detailed information
Disco variable speed drives
Mechanical adjustment with Disco variable speed drive; power range 0.25 to 7.5 kW; adjustment range 1:6
Detailed information
Standard three-phase AC motors
Standard three-phase AC motors; 0.25 to 22.0 kW 3 x 230/400 V; enclosure IP 54; mountings B3, B5 or B14; these motors are optimised for operation with a frequency inverter
|
|
|
Integrated drives ILA consist of a motor and control electronics. The drives are controlled via a fieldbus or a pulse interface. ILA are used as decentralised drives in machine and automation applications. In connection with a motion controller or a PLC, complex automation tasks can be performed in a simple and cost-effective way. Complete function modules are available for easy motion programming with a Schneider Electric motion controller.
|
|
|
These Servo drives can be installed outside the control cabinets and directly next to the machine processes. This leads to new possibilities for decentralised plant concepts. Thus, costs can be reduced considerably. The Servo Drives 930 fluxxtorque operate very precisely in the power range from 140 to 650 W. Their design is compact, they can easily be cleaned and quickly installed.
|
|
|
|
|
|
Decentralised Motion Solutions - Integrated Drives for motion control with stepper, servo or brushless DC motor
Description
Lexium Integrated Drive ILA
With AC synchronous servo motor
Superior dynamics and high torque
Closed-loop drive system with high-resolution encoder
Lexium Integrated Drive ILE
With brushless DC motor
High detent torque
Absolute position feedback
Lexium Integrated Drive ILS
With stepper motor
High torque at low speeds
Superior constant velocity characteristics
Compact design
Everything integrated in a single device
50% of space reduction in the control cabinet
40% decrease in wiring
Open Communication
All important fieldbus interfaces are available (CANopen, DeviceNet, RS 485, PROFIBUS DP, Ethernet Powerlink, EtherCAT, ModbusTCP)
Integrated safety
"Safe Torque Off" functionality prevents unintended machine starts as per IEC/EN 61800-5-2 for operator safety
Easy Installation and Commissioning
25% reduction in installation time with Lexium Commissioning tool
Two different connection technologies: printed circuit board or industrial connectors
|
|
|
|
|
|
Distributed Drive Technology
Modern machine construction concepts require intelligent automation systems. Control tasks need no longer be carried out by a central control system, but can also be handled locally. Distributed configurations in automation technology contribute greatly towards improving installation and service efficiency. With SIMODRIVE POSMO A, SIMODRIVE POSMO SI and SIMODRIVE POSMO CD/CA, control and drive tasks can now be implemented as independent modular functional units directly on site.
Consistent use of distributed systems transfers the drive technology from the control cabinet directly to the machines. The user benefits from a consequent reduction in infrastructure requirements and from lower system costs.
Distributed drives offer the following features:
- Complete solutions "without control cabinet" through "local" installation of the drives.
- Fast machine installation through the assembly of a complete functional unit.
- Low installation costs through a universal power and signal bus
|
|
|
|
|
|
Unimotor fm
055 to 250 Frames
0.72 Nm to 136 Nm(408 Nm Peak)
Unimotor fm
Unimotor fm is a high performance brushless AC servo motor range matched for use with Control Techniques drives. ‘fm’ stands for flexible motor, designed to accommodate a wide range of applications. The motors are available is seven frame sizes with various mounting arrangements and motor lengths.
Reliability and innovation
Unimotor fm is designed using a proven development process that prioritises innovation and reliability. This process has resulted in Control Techniques’ market leading reputation for both performance and quality.
Matched motor and drive combinations
Control Techniques motors and drives are designed to function as an optimised system. Unimotor fm is the perfect partner for Unidrive SP, Digitax ST and Epsilon EP drives.
Features
Unimotor fm is suitable for a wide range of industrial applications, due to its extensive range of features:
Torque range: from 0.72 Nm to 136 Nm
Standard and high energy parking brakes
Numerous connector variants, e.g. vertical, 90° low profile, 90° rotatable and hybrid box on frame size 250
Variety of flange possibilities (IEC/NEMA)
Various shaft diameters; keyed or plain
IP65 conformance; sealed against water spray and dust when mounted and connected
Low inertia for high dynamic performance; high inertia option available
World class performance
Supported by rigorous testing for performance and reliability
Optional high peak torque motors; up to 5 times stall torque
Winding voltages of 400V and 220V
Rated speeds include 1500 rpm, 2000 rpm, 3000 rpm, 4000 rpm, 6000 rpm and others available
|
|
IndraDyn A is the new generation of asynchronous motors in the 1 to 100 KW power range, available in four axis heights (100, 130, 160 and 180), with options like high-resolution, single-turn or multi-turn absolute encoders and a brake. The air and liquid-cooled motors provide significant advantages for service and preventive maintenance due to their integrated modular construction. For example, exchanging a cooling fan is possible in a few minutes with the appropriate safety measures, even when the motor is running. This provides substantial advantages when used in decentrally-powered printing machinery, machine tools, plastics machinery and general automation.
MAD Series – Air-Cooled Asynchronous Servo Motors
With modern development and production processes, a significant performance increase can be achieved in contrast to previous models. Unparalleled performance: Drive and fan motors offer an IP65 protection rating
|
|
Rexroth IndraDyn S
Synchronous servo motors (MSK) for all requirements, from 1 to 260 Nm and synchronous servo motors for explosive environments (MKE), from 1 to 100 Nm
Rexroth IndraDyn A
Air-cooled asynchronous servo motors (MAD) and liquid-cooled asynchronous servo motors (MAF) for power levels from 10 to 100 kW
Rexroth IndraDyn L
Synchronous linear motors for feed forces from 200 to 22,000 N
Rexroth IndraDyn T
Synchronous torque motors with torque ratings up to 13,800 Nm and rotary speeds up to 2,000 rpm
Rexroth IndraDyn H
Synchronous high-speed motors for maximum torque up to 6,500 Nm and speeds up to 30,000 rpm
Gearboxes
Standard (GTE) and high-performance (GTM) planetary gearboxes for servo motors
Standard and geard boxes
Wirtschaftliche und zuverlässige Technik bekannter Hersteller mit optimaler Anbindung an Rexroth-Antriebssysteme
|
|
MSK Series
This series offers complete scalability, with performance options for standard and more challenging applications. The compact construction with increased torque density provides a costomer-orriented range of size and performance.
|
|
Servo Motors
AC Brushless Servo Motors
Use our Servo Motor Virtual Ship program and have your Servo Motor order shipped within 5 days ARO!
- MDM-5000 Brushless Servo Motor
- Stainless Steel Brushless Servo Motor
- Food Grade Brushless Servo Motor
- N-Series Servo Motors
- H-Series Servo Motors
|
|
DC Brush Servo Motors
DC Brush Servo Motor Platform 2100
- 2105 Servomotor
- 2110 Servomotor
- 2115 Servomotor
- 2120 Servomotor
- 2130 Servomotor
DC Brush Servo Motor Platform 2600
- 2605 Servomotor
- 2610 Servomotor
- 2615 Servomotor
- 2620 Servomotor
- 2630 Servomotor
- 2640 Servomotor
DC Brush Servo Motor Platform 3500
- 3505 Servomotor
- 3509 Servomotor
- 3515 Servomotor
- 3528 Servomotor
DC Brush Servo Motor Platform 4100
- 4101 Servomotor
- 4102 Servomotor
- 4104 Servomotor
- 4106 Servomotor
DC Brush Servo Motor Platform 40TT
- Drop in replacement for the discontinued Kollmorgen* TT Servo Motors
- Matched Windings, Connections, and Mechanical Interface
- Heavy Duty Steel Housing for Demanding Service
- Full Performance Testing Included
- Resonably Priced, Excellent Value
- Reliable Operation in Sever Service
|
|
|
|
|
|
The new, revolutionary Torque range of rare earth, brushless servo motors is base on a novel, multi polar magnetic design, resulting in a high torque, ultra short servo motor particularly suitable for direct drive applications.
The Ultract T motor is mechanically compatible (flange and shaft) with equivalent torque servo motors but the overall lenght and mass is about 1/3rd of that required with a conventional design.
The shaft and front flange are particularly accurate and robust for direct load coupling. The motors are IP 65 protected (except the shaft) and are supplied with MS connectors.
The lamination free winding is shielded and double isolated fot EMC control; the winding capacitance is not coupled to the frame.
Built-in feedback sensor choice:
Multiturn, absolute magnetic encoder with 17 bit resolution + 4096 turns with serial ENDAT interface
resolver for low cost and basic performance applications.
ENDAT based units are supplied with electronic nameplate for auto setting with all Phase Motion Control drives. The thermal sensing system
|
|
|
|
|
|
Standard shaft technology. To avoid the traditional dichotomy between key- smooth shaft applications, Phase Motion Control releases the new standard shaft in which a key seat is filled with an insert (photo below) and the whole set is ground to shaft tolerance. The shaft is therefore round and ready for clamping with conical hubs (recommended). If a key is required (and the corresponding reduced servo performance is accepted) the insert can be removed and a standard key inserted. All shafts are balanced with the insert so that simple rotating parts (e.g. pulleys, gears) need not to be balanced.
Safety brake: All motors except UL 071040 have an internal cavity where the PM safety brake can be mounted. The brakes are all rare earth permanent magnet type. This new high power density brake operates without brake pads. As a consequence, the problem of pollution of the motor cavity when the brake is operated incorrectly is avoided.
Additional inertia: an extra flywheel can be introduced in the brake cavity to compensate for poor mechanical linkages between the motor and the load.
Single piece extruded frame, smooth, with O-rings on all couplings and IP 65 protection to allow flushing and sterilization in food and chemical applications
Standard circular connectors, turnable 270 degrees, standard high flexibility cables available;
Oversized front bearings improves bearing life by 70%; 28 mm shaft available on request
Peak speed 4000 rpm on standard type
|
|
|
|
|
|
TPM+ power
Rotary Servo Actuators
For more torque and power. The TPM+ power is the new strong member of the TPN+ product family.
TPM+ power overview
* Superior dynamics thanks to the latest motor technology
* Superior running thanks to the helical teeth
* Superior power density and reduced length thanks to the unification of the motor and the gearhead
* Reduced sensitivity to dirt thanks to the functional design
More features at a glance
* Possible to reduce gearhead backlash to less than 1 arcmin Direct attachment of drive components (pinion, belt pulley, indexing table) to standard output flange
* An additional bearing is not required due to the stability of the output bearing
* Ready-assembled cables and operating instructions available for more than 20 servo controllers
* Easy operation in minutes
* UL model as standard
* Electrical connections with convenient bayonet connectors
Technical Data
* TPM sizes: 004, 010, 025, 050, 110
* ratio: 4, 5, 7, 10, 16, 20, 25, 28, 35, 40, 50, 70, 100
* Bus voltage: 320*, 560 V DC *(sizes 004-025)
* max. output torque: 50 - 1600 Nm
* max. speed: 40 - 1500 rpm
* Current at standstill: 0,9 - 27,8A at 560V DC
* weight: 4 - 50kg
* max. tilting moment: 110 - 3280 Nm
* ambient temperature: 0 - 40°C
* protection class: IP65
* Insulation class: F
Options for TPM+ power
* Permanet-magnet brake
* Resolver (standard), EnDat single- and multiturn, Hiperface single-and multiturn
* reduced backlash
* Temperature sensor as PTC or KTYPermanent-magnet brake
|
|
|
|
|
|
TPM+ dynamic
Rotary Servo Actuators
The TPM+ dynamic is the logical successor to the successful TPM servo actuator.
TPM+ dynamic overview
* Superior dynamics thanks to the latest motor technology
* Superior running thanks to the helical teeth
* Superior power density and reduced length thanks to the unification of the motor and the gearhead
* Reduced sensitivity to dirt thanks to the functional design
More features at a glance
* Possible to reduce gearhead backlash to less than 1 arcmin Direct attachment of drive components (pinion, belt pulley, indexing table) to standard output flange
* An additional bearing is not required due to the stability of the output bearing
* Ready-assembled cables and operating instructions available for more than 20 servo controllers
* Easy operation in minutes
* UL model as standard
* Electrical connections with convenient bayonet connectors
Technical Data
* TPM sizes: 004, 010, 025, 050, 110
* ratio: 16, 21, 31, 61, 64, 91
* Bus voltage: 320, 560 V DC
* max. output torque: 40 - 1300 Nm
* max. speed: 50 - 380 rpm
* Current at standstill: 0,5 - 16A at 560V DC
* weight: 2,4 - 37kg
* max. tilting moment: 91 - 3064 Nm
* ambient temperature: 0 - 40°C
* protection class: IP65
* Insulation class: F
Options for TPM+ dynamic
* Permanet-magnet brake
* Resolver (standard), EnDat single- and multiturn, Hiperface single-and multiturn
* reduced backlash
* Temperature sensor as PTC or KTYPermanent-magnet brake
|
|
MAD Series – Air-Cooled Asynchronous Servo Motors
With modern development and production processes, a significant performance increase can be achieved in contrast to previous models. Unparalleled performance: Drive and fan motors offer an IP65 protection rating
MAF Series – Liquid-Cooled Asynchronous Servo Motors
The MAF series with liquid cooling provides high sustained performance in a compact package. Robust and maintainable. The quick-release coupler with integrated leakage protection can be disconnected under full coolant pressure. The encoder systems are accessible from the outside and simplify on-site service.
|
|
|
|
|
|
All advantages of IndraDrive Mi at one glance:
* Significant reduction of the cabinet size by up to 70 %
* Drastic reduction of wiring work by up to 85 %
* Significant increase of flexibility and modularity of machines and plants
highest performance, smallest space requirements
* With IndraDrive Mi, Rexroth introduces another milestone in drive technology – electronic control system and servo motor combined in one ultra-compact unit. This makes IndraDrive Mi the ideal solution for all applications where maximum flexibility and economic efficiency should come along with minimum space requirements.
the ultra-compact drive system
* The compact control electronics of the IndraDrive Mi uses the lateral surface of the servo motor as a cooling element. This reduces the total unit size by more than 50 % compared to classical servo drive solutions and by up to 30 % compared to other integrated solutions.
* Another advantage of the IndraDrive Mi is the significantly reduced installation work – a single cable is sufficient for power supply and communcation via SERCOS interface.
|
|
MSK Series
This series offers complete scalability, with performance options for standard and more challenging applications. The compact construction with increased torque density provides a costomer-orriented range of size and performance.
|
|
The R256 is a compact step motor driver and controller which is designed as a stand-alone option to the integrated motor/controller. This product offers the user the option to daisy-chain up to 16 of these units to meet multi-axis application demand. In addition, the R256 offers the user the ability to query various existing parameters such as the microstepping resolution, current position as well as the various speed settings. Visit www.LinEngineering.com today!
Features:
2.0 Amp Chopper (PWM) Driver with Controls
Operates from 12 to 40 VDC
Microstep resolution from ½ to 256 microsteps
Two digital I/O's and two fixed inputs
Stand alone operation with no PC
Single 4 wire bus linking up to 16 units
Fully programmable speeds, current, and acceleration
Stores up to 16 different programs (4kbytes of memory)
|
|
|
|
|
|
AB425S: universal control unit machine drives for 1 servo motor and 2 stepping motors
- Control unit for Efka DC1500 or DC1550 motor
- and 2 stepping motors Efka SM200 and SM 250
- or 3. party products up to 60V and 5A phase current
- User customized programming of individual and even complex functional sequences in a higher programming language for specially designed sewing workplaces and sewing automats using Efka C200 compiler
- Synchronous operation of all drives
- X/Y function
- USB port for data storage uploading and downloading
- Updates via USB with email possible
- Flash technology, no EPROM
- Digital parameter setting directly on the control unit
- Programmable light barrier functions
- Integrated tread monitor function
- A range of HMI: Variocontrol V850 und VarioTouch V900
- 29 short-circuit proof outputs
- 28 digital inputs freely programmable
- 2 analog inputs
- 2 digital / analog converter output (0-10V)
- Operating hours counter
- Machine operating time monitoring with optical or acoustic signal for maintenance
- Expandable to other Efka drives via CANefka
|
|
Linear Actuators
MORE SOLUTIONS FROM US EQUALS MORE SUCCESS FOR YOU!
At Cleveland Motion Controls, we have always believed in giving you more choices. After all, your application is unique, so the servomotor you choose for it should be unique, too.
While the competition stacks their shelves with motors and hardware, we pack ours with engineered solutions. The truth is, our shelf contains just about any type of solution you could require, from simple integration components such as brakes, encoders and tachometers, to elaborate breakthrough designs.
In addition to our high power density selection of clean operating, low maintenance servomotors, we also provide you with a range of standard integration and custom engineered options to round out your solution.
|
|
|
|
|
|
High performance integral linear actuators for "all electric" plastic injection molding machines
Thrust range 2,000 to 200,000 N
Speed up to 1 m/sec
High energy brushless permanent magnet servo motor
Integral high load ball lead screw, up to 80,000 N
Integral lead screw, high duty satellite roller type above 80,000 N
Built in absolute multiturn encoder
The range of integral linear actuators developed by Phase Motion Control for various linear positioning applications, and specifically to ease the replacement of hydraulic cylinders in plastic injection molding machines, delivers a complete functionality packaged in a single engineered unit.
The actuator consists of: A high performance, rare earth PM servo motor derived from the Ultract range, with a hollow shaft, which can take the fully retracted lead screw; A special front end with a high axial load bearing system (oblique contact ball bearing fin small units, barrel type conical roller bearings in the larger units) which houses the rotary nut of the lead screw, and which is driven by the motor part; In the back of the actuator, a multiturn absolute encoder which is used for electronic control of the electric piston across the stroke.
The actuators thus realized are endowed with exceptional stiffness and accuracy, travel speed up to 1 m/sec, can be controlled both in thrust and position, with repeatability better than 1/100 mm. All issues of screw lubrication, assembly, alignment, as well as the related drive train, are optimized and designed inside the unit.
|
|
ternary®
Linear and rotary actuators
For positioning applications where pneumatic exceeds the capabilities regarding:
* Flexibility/programmability
* Repeatability
* Integration with Motion Control systems
* Soft touch
* Force control
* Set up & installation time
* IP-protection
Highlights at a glance
* all in one: motor, controller, actuator/gearbox, fieldbus interface
* Force up to 1000 N
* Repeatability +/- 0,009mm (0.00035")
* Stroke up to 300 mm with ballscrew
* Ratios from 5 to 25 with planetary gearbox
* Speed up to 900 mm/sec
* Maintenance free
* Flange size 32 +46 mm available
* IP protection 65 (linear) / 64 (rotary)
Applications
High speed format changes in packaging & woodworking machines, assembly & dosing systems, semiconductor handling, robots, and many more.
Products
* via PC software
* with Teach pendant
* PLC controlled (parallel I/O)
* Serial field bus
* CANopen
* DeviceNet
* PROFIBUS
|
|
|
|
see the results for the following category : 
