|
|
MSK Series
This series offers complete scalability, with performance options for standard and more challenging applications. The compact construction with increased torque density provides a costomer-orriented range of size and performance.
|
|
|
These low-pole AC servo motors of the ECOSPEED series stand out due to extremely low torque ripple at low speed. Torque from 1 - 26 Nm. Flange dimensions 60 mm, 80 mm, 110 mm, 130 mm. Rated speed depending on series between 1500 and 5000 rpm. Available with incremental encoder or absolute value encoder. Holding brakes from 0.5 - 10 Nm (optional). Certified version according to ATEX directive 94/9/EG for use in hazardous locations. Also available as hollow-shaft built-in motor. Approvals: UL/CSA, CE.
|
|
|
Our AC synchronous servomotors have a very high power density and enable highly dynamic positioning drives with an excellent price/performance ratio. For maximum flexibility, the servomotors are compatible with the standard servo connection dimensions. The AC synchronous servomotors are equipped with an absolute sensor system: SinCos® Singleturn (SRS, SKS) or SinCos® Multiturn (SRM, SKM). The encoder system with the Hiperface® interface enables auto-initialisation of the motor and current controller parameters. This greatly simplifies the commissioning procedure of the drive system.
|
|
Technical Data: FMD motors
- Nominal torque: 0.5 Nm to 68 Nm
- Rated speed range: 2000 to 6000U/min
- Flange dimensions: 58, 70, 92, 115, 142 and 190mm
- Protection class: IP65
|
|
Brushless three-phase synchronous servo motors with permanent magnets.
- Static torque 0.1 to 115 Nm.
- Particularly high power density
- Large rotational speed control range
- High dynamics and precision
- Maintenance-free
- Optionally with brake
Customer-specific solutions: high rotational speeds, special flanges, special shafts etc.
|
|
|
|
|
|
DSD - the servo motors for highly dynamic applications
The six installation sizes for the DSD-range of Baumüller offer a suitable solutions for almost every application in the automation.
The servo motors for highly dynamic applications with the highest requirements of acceleration capacity and the best start-stop qualities, such as for:
packaging machines
textile machines
plastic machines
handling machines
special machines
small robots
DSD 28-100 - Dynamic Motors
high torque accuracy
high speed
almost no cogging effect
compact frame size with high power density
maximum dynamic response due to excellent torque - inertia ratio
smooth housing surface – not easily soiled
sleek, uniform housing
permanent field synchronous servo motors
main connection via terminal box or connector (DSD 28 - 45 only via connector)
IP44, other protection type on request (DSD 28 - 36)
IP65 non-ventilated, IP54 surface-ventilated with fan (DSD 45 - 100)
encoders: resolver 2-pole, SinCos-encoder (optional)
more encoders available on request
all types optionally with brake
|
|
While smaller in size, gives highest dynamics and output power.
The servomotors presented here are only a small part of the wide Groschopp product range.
|
|
Meeting stringent requirements in terms of response, precision and excellent power-to-size ratio.
The motor sizes have been carefully graded and offer rated torques from 0.8 to 64 Nm (0.25 to 10.0 kW) and peak torques of up to 191 Nm. As a result, finding the optimum motor for any drive task is easy.
|
|
The LSH Servomotor - the power pack
Nominal torque 0,2 Nm up to 20 Nm
Based on the new winding technology, the so-called concentrated winding, the new LSH generation of motors improves power density by between 30% and 70% relative to conventional technologies. For the user that means as much as a 100% improvement in dynamics, and more compact installation combined with smooth running.
The LST-Servomotor - the versatile one
Nominal torque 0,1 Nm up to 24 Nm
Featuring conventional winding technology, the LST motor combines all the advantages of a 6-pole synchronous servomotor.
* Well suited to speeds up to 9000 rpm. Special windings are possible on request.
* High overload capacity even at standstill based on efficient heat distribution in the stator packet.
* Increased rotor moment of inertia for torque adaptation.
|
|
MSK Series
This series offers complete scalability, with performance options for standard and more challenging applications. The compact construction with increased torque density provides a costomer-orriented range of size and performance.
|
|
| ... products without technical information |
| |
AC ASTRO synchronous geared motor with worm gear
ASM SSG
|
|
ASTRO synchronous motor with Stirnradgeriebe ASM SG
- starting and direction of rotation-stably
- synchronous, load-independent number of revolutions
- blockierfest briefly
- 1-polig reversable
- high efficiency
- noiseless run
- high self retaining moment
- maintenance-free
Overall lengths
ASM 24/26 SG = 89,5mm
ASM 44/46 SG = 109,5mm
ASM 84/86 SG = 149,5mm
Terminal box execution = 33mm longer
Engine system
4-polig with 1.500Upm (50Hz), 1800Upm (60Hz)
with 6 pins with 1.000Upm (50Hz), 1200Upm (60Hz)
Rated voltages = 1~24V to 3~500V
Continuous operation S1 (special modes of operation possible)
Self retaining moment in the dead condition
Wärmeklasse B
Coil windings = to 130°C
Ambient temperatures = -15C to 40°C
Enclosure = IP40, IP54, IP55
Basic parts = plastic or aluminum pressure pouring
Kind of connection = cable, braid or terminal box connection
|
|
ASTRO gear motor with flat transmission ASM SG01
|
|
ASTRO a phase synchronous geared motor AS 80-6
Ex engine after guideline 94/9/EG (ATEX)
Compact building method
Area of application:
Gases, steams or fog "G"
Types of dust "D"
z.B. Automotive, printing, food, regulation industry
1~24V for 50 or 60 cycles per second
Speed range 0.75 - 1200 Upm
High stable torque process
GROUP OF EQUIPMENT II
Category 1
very high measure of security
Zone 0 and 20 = no permission
Category 2 = permissions
high measure of security
Zone 1 = G (gas)
Zone 21 = D (dust)
Category 3
normal measure of security
Zone 2 = G (gas)
Zone 22 = D (dust)
Ignition enclosure:
G = gas/zone 1
Engine: Ex II 2 G ex e II T4
Gear motor: Ex II 2 G ex ec II T4
D = dust/zone 21
Engine: Ex II 2 D ex tD A21 IP65 T 90°C
Gear motor: Ex II 2 D ex tD C A21 IP65 T 90°C
LARVA IN GERMANY
|
|
AC synchronous geared motor with flat transmission ASM fG 05 or 20
|
|
ASTRO synchronous geared motor with planetary gear ASM PG
|
|
DC-Motors (3-phase synchronous)
available sizes: 24 mm up to 300 mm
- Power: 5 W up to 70 kW
- Rotors: NeFeB, Steel/CFK-Armouring
- Air gap winding, built-in hall sensors or sensor less
- Speed: max. 180,000 rpm
|
|
|
|
