|
|
K1BL
High-speed hole EDM by Sodick for micro-holes of 0.08 mm diameter
The K1BL is an easy-to-use micro-hole EDM machine for hole diameters up to 0.08 mm.
Its strengths lie in the machining of steels, nonferrous metals, and other difficult materials. With a linear drive for the z axis, it operates with vibration-free precision and high dynamic response in the drilling of holes between 0.08 and 0.25 mm in diameter.
Highly responsive linear motors secure continuous and high precision drilling of very small holes down to the use of 80 micron electrodes. The machinining scope of K1BL, equipped with a Sodick linear motor on the main (Z axis) completes the range. In addition the high response of the linear motor increases the machining speed and reduces the electrode wear significantly.
|
|
|
The Drill 11 is a production machine designed for the drilling of parts in hard materials such as hardened steel or carbide. Its drilling capability ranges from 0.3 to 3.0 mm diameter through a depth of 200 mm. Particularly simple and easy to use, the 3 axes (X, Y, Z) numerical control makes it possible to program a series of holes for fully automatic machining.
|
|
|
|
|
|
* NEW 3D and Multi-Axis-µEDM CNC controller SX-CU offers new possibilities on the Micro-Machining with new dedicated SARIX Technologies of 3D Micro-Milling. Its combination with a continuous automatic wear compensation spindle and a "built in "Micro Wire-EDM electrode grinding device opens up new perspectives on the micro machining of ;
* 3D Micro Milling of complexes forms with radius corner down to 3 microns
* perfect fins walls and microstructures
* high precision of smaller, deeper and more precise perfect round holes
* high surface finishing of Micro Sinking cavities
* NEW SX-MMI, "On-board", easy and user friendly unlimited programming and editing software.
* NEW SX-µEDM-CAM SARIX Modul compatible to ESPRIT CAD-CAM software, integrates the new Micro-EDMing process "Multi-Axis-Multi-Step" for the machining down to 10 microns with Ra up to 0.05.
* High precision machining and accuracy up to ±1 micron.
* High performance Micro Fine Pulse Shape generator SX-MFPS for 3D Micro EDMing machining using tubes and solid electrodes from 5 microns to 3.0 mm.
* High Speed Micro EDM Drilling Technology with automatic breakthrough detection device.
* "High production capability concept" upto 8 axis for complex work pieces with X-Y-Z, back slide W-axis (Z2), C and A/B indexing axi
|
|
Best-seller machine for drilling small holes
Drilling hardened hard materials to non-metal materials such as aluminum within seconds
Using Sodick’s original water-soluble dielectric fluid VITOL-KS developed for high-speed drilling, K1C drills holes with pipe electrodes Φ0.25 to 3.0 mmwithin a matter of seconds. The machine is capable of drilling a wide variety of materials from difficult-to-cut materials to aluminum and other non-metal materials (material: SKD11, thickness: 20 mm, electrode diameter: Φ0.8 mm, drilling time: 20 sec.).
|
|
| ... products without technical information |
| |
|
|
|
|
The AF_10 is a machining centre designed to cut to the utmost the time you have to dedicate to reinforcement fastening operations.
Because it features a loading roller conveyor and an unloading magazine, the bars are stored at exit. Once the profile has been inserted, movement, machining and unloading are all automatic. This way, the operator in charge of welding can take up the bars four at a time, thus cutting times down to the minimum. Or else the operator can dedicate him/herself with greater continuity to other operations required for the preparation of the welding bar.
The AF_10 offers various machining options: it permits having two screw pitch values and two distance values for the first screw from the outer point of the profile (tip of corner in case of 45° cuts, or outer point in case of 90° cuts for the crosspieces). What is more, it also carries out another operation of primary importance (selectable): because it has a lower motor, it drills frames for wall mounting preparation (or other jobs to be verified).
Finally, this is a machining centre which we recommend if you wish to increase the productivity of both a medium-sized workshop or an industrial workshop (in this latter case together with other machining centre and/or cutting/machining units)
|
|
The I.4F is an electro-pneumatic milling machinewith a vertical axis, fitted with a revolving head, equipped with four cutter-holding shafts.
This model allows you to fit four different cutting units with the relevant stops, and to use each time the required unit simply by turning the cutter-support head.
It is also supplied with orienting gripper to obtain cutting at 45° or intermediate angles.
The wide range of extra fittings allows very quick changes in working, saving time wastage caused by errors in setting up, by avoiding disassembly and assembly, with considerable increase in productivity.
|
|
R25 Bit diameter 33 mm, 1 1/3 inch
Robit Rocktools Ltd, established 1985, is a Scandinavian manufacturer of high quality rock and ground drilling tools for construction, mining and quarrying
|
|
The STAF®, the System of Casing Car-Borer, are a method of
pressure measuring drilling of type TFEM (Tube Split open with
Simultaneous removal of Materials) in accordance with standards NF P
94-110-1 and IN ISO 22476-4.
It is particularly recommended for the installation of the tube
split in the grounds known as of cover or not very homogeneous.
|
|
|
RHINO reaming shells sold at Fordia are manufactured with high-quality diamonds set into a high-strenght matrix, therby providing an excellent lifetime. The diamond-coated sections of the tool are cast directly onto the matrix and the reinforcement of the tool ensures maximum performance as the shell will maintain a full gauge hole in all types of ground.
|
|
Pilot adapters and reamers
Robit Rocktools Ltd, established 1985, is a Scandinavian manufacturer of high quality rock and ground drilling tools for construction, mining and quarrying.
|
|
|
HXY—2BT Core Drill is developed to meet the needs of users and the development of geological works, it is a new type vertical shaft core drill. It is applicated for engineering geological exploration drilling, hydrogeology well drilling and big—hole basic engineering drilling including core drilling with tungalloy—carbid—tipped and diamond bit mainly.
|
|
Highlights:
- Versatile through our distance plate up to Ø 500 mm and 5.2 kW power
- Precise working made easy thanks to our easy adjustable, low-wear steel-bronze guides
- Use the extension tracks if you need more penetration. Available from 230 mm up to 910 mm
- High-quality steel toothed rack paired with precise, integrated steel guides
- Wire Saw SK-B may be mounted on this drill stand
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
