|
|
K1BL
High-speed hole EDM by Sodick for micro-holes of 0.08 mm diameter
The K1BL is an easy-to-use micro-hole EDM machine for hole diameters up to 0.08 mm.
Its strengths lie in the machining of steels, nonferrous metals, and other difficult materials. With a linear drive for the z axis, it operates with vibration-free precision and high dynamic response in the drilling of holes between 0.08 and 0.25 mm in diameter.
Highly responsive linear motors secure continuous and high precision drilling of very small holes down to the use of 80 micron electrodes. The machinining scope of K1BL, equipped with a Sodick linear motor on the main (Z axis) completes the range. In addition the high response of the linear motor increases the machining speed and reduces the electrode wear significantly.
|
|
|
The Drill 11 is a production machine designed for the drilling of parts in hard materials such as hardened steel or carbide. Its drilling capability ranges from 0.3 to 3.0 mm diameter through a depth of 200 mm. Particularly simple and easy to use, the 3 axes (X, Y, Z) numerical control makes it possible to program a series of holes for fully automatic machining.
|
|
|
|
|
|
* NEW 3D and Multi-Axis-µEDM CNC controller SX-CU offers new possibilities on the Micro-Machining with new dedicated SARIX Technologies of 3D Micro-Milling. Its combination with a continuous automatic wear compensation spindle and a "built in "Micro Wire-EDM electrode grinding device opens up new perspectives on the micro machining of ;
* 3D Micro Milling of complexes forms with radius corner down to 3 microns
* perfect fins walls and microstructures
* high precision of smaller, deeper and more precise perfect round holes
* high surface finishing of Micro Sinking cavities
* NEW SX-MMI, "On-board", easy and user friendly unlimited programming and editing software.
* NEW SX-µEDM-CAM SARIX Modul compatible to ESPRIT CAD-CAM software, integrates the new Micro-EDMing process "Multi-Axis-Multi-Step" for the machining down to 10 microns with Ra up to 0.05.
* High precision machining and accuracy up to ±1 micron.
* High performance Micro Fine Pulse Shape generator SX-MFPS for 3D Micro EDMing machining using tubes and solid electrodes from 5 microns to 3.0 mm.
* High Speed Micro EDM Drilling Technology with automatic breakthrough detection device.
* "High production capability concept" upto 8 axis for complex work pieces with X-Y-Z, back slide W-axis (Z2), C and A/B indexing axi
|
|
Best-seller machine for drilling small holes
Drilling hardened hard materials to non-metal materials such as aluminum within seconds
Using Sodick’s original water-soluble dielectric fluid VITOL-KS developed for high-speed drilling, K1C drills holes with pipe electrodes Φ0.25 to 3.0 mmwithin a matter of seconds. The machine is capable of drilling a wide variety of materials from difficult-to-cut materials to aluminum and other non-metal materials (material: SKD11, thickness: 20 mm, electrode diameter: Φ0.8 mm, drilling time: 20 sec.).
|
|
| ... products without technical information |
| |
|
|
|
|
PORTABLE DRILL RE-SHARPENER, VARIABLE ANGLES, FOR HSS AND HARD METAL. THREE MODELS: 2mm-13mm, 3mm-20mm, 12mm-30mm.
SAE 1300
Features:
Drill diameter: 2-13mm
Variable angle: 90º -144º
Speed: 5300 rpm
Engine: AC 220V
Weight: 10Kg
CBN grinding wheel for HSS: CBN-200
Diamond grinding wheel for Hard Metal: DIA-400-1300
Collets: ER-20
Dimensions: 30 x 20 x 1.8 cm
SERIES OF EQUIPMENT
Sharpening model SAE-1300
CBN grinding wheel for high speed steel.
Collets ER-20, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 and 13.
Allen wrench
OPTIONAL EQUIPMENT
Diamond wheel DIA-400-1300 for hard metal.
SAE 2000
Features:
Drill diameter: 3-20mm
Variable angle: 90º -144º
Speed: 5300 rpm
Engine: AC 220V
Weight: 17Kg
CBN grinding wheel for HSS: CBN-200-2000
Diamond grinding wheel for Hard Metal: DIA-400-2000
Collets: ER-25
Dimensions: 40 x 22 x 20 cm
SERIAL EQUIPMENT
Sharpening model SAE-2000
CBN grinding wheel for high speed steel.
Collets ER-25: 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 and 20.
Allen wrench
OPTIONAL EQUIPMENT
Diamond wheel DIA-400-2000, for hard metal.
SAE 2500
Features:
Drill diameter: 12-26mm (optional 27, 28, 29, 30)
Variable angle: 90º -144º
Speed: 5300 rpm
Engine: AC 220V
Weight: 27Kg
CBN grinding wheel for HSS: CBN-140-2500
Diamond grinding wheel for Hard Metal: DIA-400-2500
Collets: ER-40
Dimensions: 45 x 24 x 22 cm
SERIAL EQUIPMENT
Sharpening model SAE-2500
CBN grinding wheel for high speed steel.
Collets ER-40: 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25 and 26.
Allen wrench
OPTIONAL EQUIPMENT
Diamond wheel DIA-400-2500 for hard metal.
Collets ER-40: 27, 28, 29, 30.
|
|
|
Even very small shops can now sharpen their own drills, and keep on working. For the cost of less than 100 drills, you can accurately sharpen your most common drills in under a minute. The Darex V390 incorporates some of the same technology in our more advanced machines and is the perfect choice for shops that need a sharpener for intermittent use. Its simple, intuitive design give everyone access to sharp drills when you need them.
|
|
|
If you want the right point for the job, but don't want to become a tool and cutter grinding expert, the Darex XT3000 is for you. It sharpens a wide variety of sizes and styles of drills and other tools with ease and accuracy. Imagine, for the price of a couple hundred drills, you can sharpen in house for only pennies a drill. Using our patented chuck/cam design allows anyone to be a sharpening expert with a few minutes of instruction. A rock solid heavy duty machine capable of sharpening all day, everyday. Attachments can be interchanged in seconds and all adjustments can be made without tools.
|
|
AUTOMATIC DRILL RE-GRINDING MACHINE
The easy-to-operate RDG-13 can resharpen "R thinning" and "X Split" points with different point
angle (118 to 140 deg) and can resharpen "X" thinning points; with or without a gash.
Features
1. This machine can resharpen R thinning, X thinning with a gash or without a gash from 3mm to 13mm diameter, max 200mm OAL.
2. The special sensors enable the machine to adjust the tool to the proper grinding position, and then grind automatically.
3. Standard accessories include special collets for drill diameters 3, 4, 5 and 6 mm.
More information on this product (including dimensions and list prices) can be found by contacting OSG Europe or visiting http://www.osg.co.jp/eng/products/index.html for download the PDF.
|
|
S11 speed
The specialist for any standard and special tools
- T-shaped design for easy one-side operation
- Motor-driven height adjustment
- Infinitely variable spindle drive from 2,000 to 12,000 rpm
- Schort work distance
- Axial infeed grinding spindle
- Measuring and checking on the machine: with the aid of a microscope, a projector or of ultra-modern video equipment
- Ideal for the maintenance of any standard and special tools such as step drills, rounding cutters, form drills and hobs
|
|
|
|
|
|
The Haro Starline NC machine basically is designed for producing or/and sharpening different types of tools as milling cutters, drills, step drills, reamers, …
Historically introduced as an evolution of the Baseline, the Starline develops more power at grinding level and therefore is equipped with substantial water cooling (120l/min) while being housed in a fully watertight cover.
The Haro Starline range is made of several models depending on:
* the required dimension:
o longitudinal X-axis grinding length with 550, 700.
o cross travel Y-axis varying from 190 to 265 mm
o vertical Z-axis from 210 to 300 mm
* the NC capability to handle complex tools: 3 to 6 axis movements could be controlled by the NC automation system based on SINUMERIK technology able to manage 2 to 5 interpolated axis (Siemens 357 or 810D).
* the power delivered to the grinding wheel: from 3,8 to 20 KW, speeding from 6000 to 28000 RPM
* the customized software application as developed in line with the customer requirements.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
