|
|
Chip auger or optional conveyor for chip removal
Huge fully ground machine table with 5 T-Slots
Automatic lubrication
Spindle cartridge cooling system
35HP closed loop spindle motor with two-speed gearbox
AC Yaskawa Digital Servos
110mm O.D. 5 bearing spindle with air-purge seal
Inverted rail design in X axis means table support is always centered under the spindle
1000 IPM rapid traverse
Fully ground double anchored ballscrews
High speed Centurion PC based conversational control
Networking capable
|
|
Description
MAKINO's V-series which has been developed especially for the mold construction offers an extensive performance spectrum and a multitude of constructive solutions. These guarantee permanent process stability and accuracy and the best quality surface finish.
The machining centres of the V-series are distinguished in particular by the rigidity and stability of the components, its outstanding damping properties and the uncompromising design of the machine structure. MAKINO sets new standards for the modern mold construction.
Constant developments in technologies are the basis for fulfilling the requirements of the mold construction with the highest quality of production.
|
|
Our company is specialized in design and construction of NUMERICAL CONTROL MACHINING CENTRES 3, 4, 5 axis for cutting and machining soft materials (aluminium, composites, plastic, wood).
Ranges of application are extremely different (aeronautics, automobil and plastic industries, appearance cover, houseold furniture, naval construction, shaping, molds and patterns...).
Our range represents single and multispindle machines with and without automatic tool changers.
Standard capacities from 2000 mm x 1000 mm to 40 metres x 6 metres.
Machines are designed with :
- moving gantry and fixed table for long products,
- fixed gantry and one moving table for smaller components and two moving tables for higher productivity.
- overhead moving gantry.
High velocity movements due to brushless or linear motors combined with high speed spindles allow increased productivity. The installation of an automatic Tool Changer or multi-spindles also allows the regrouping of different operations within the same machining area.
The efficiency increases by a connection between your CAD system and CRENO CAD CAM softwares :
- complexe 5 axes machine(mould or triming)
- nesting software for optimizing the use of material.
We trust our product range is of interest to you, please do not hesitate to contact us for any further information.
|
|
Chip auger or optional conveyor for chip removal
Huge fully ground machine table with 5 T -Slots
Automatic lubrication
Spindle cartridge cooling system
15HP closed loop WYE/Delta spindle motor with options to 30 HP
Spindle options to 15,000 RPM
AC Yaskawa Digital Servos
110mm O.D. 5 bearing spindle with air-purge seal
Inverted rail design in X axis means table support is always centered under the spindle
1000 IPM X, Y, Z rapid traverse, Optional 1600 IPM
Fully ground double anchored ballscrews
High speed Centurion PC based conversational control
Networking capable
|
|
PHANTOMATIC T3 A
CNC machining centre with three controlled axes, designed for machining operations on bars or workpieces made of aluminium, PVC, light alloys in general and steel up to 3 mm thick. It is provided with a 4-place tool magazine, with provision for containing 2 angle machining heads and a side milling cutter, for machining operations on the 5 faces of the workpiece. It also has a traversing work table which facilitates workpiece loading/unloading as well as considerably increasing the machinable section.
|
|
•Full guard, manual door opening
•Console on board LH side machine complete with PC FOMCAM software
•CNC controlled interpolating X, Y, and Z
•Axis sliding X,Y,Z on linear guides with high precision
•X axis movement with DC motor and high pressure reducer
•Y and Z axis movement with DC motors and drive with ground recirculating ball-screw
•Pneumatic rotation of the worktable -90° to 0 to 90°
•Worktable height 850 mm
•Pneumatic vices (n° 4) that translate along the worktable with quick positioning (without use of keys or accessories) (PATENTED)
•Dual working pressure with safety valves for profile stop
•Vices positioning readout on the workable by CN
•Automatic/manual tool change ISO 30 cone with cone tool-holder (6 tools)
•Software automatically corrects tool diameter and length
•Milling capacity: X=3.000, Y=250, Z=120.
•Electrospindle speed: 1000/12000 rpm, 2.2 kW
•Microdrop lubrication
•Set-up for central greasing for recirculating ball-screws and linear guides
•LH and RH profile pneumatic stop
•The profile being machined can be greater than the X milling depth (3.000 mm) alternatively using the pneumatic stops on the left and the right of the machine.
•Air working pressure required 7 bar
•Work cycle air consumption 24 Nl
•Chip bin
|
|
Description
The S33APC vertical machining center utilizes a 40 taper, 13,000-rpm spindle with the stiffness and rigidity required for hard cutting applications and the speed necessary to provide high surface quality for demanding die and mold applications. Heavy cast construction and an axis configuration with no overhangs ensures high machine rigidity, resulting in outstanding accuracy over the full range of travel. It is capable of maintaining positioning accuracies to within ±.0001 inch (.003 mm) and repeatability of ±.00008 inch (.002 mm).
|
|
|
Okuma's powerful ACE Center is the foundation for vertical machining centers that meet the most exacting production needs. Okuma's solid bridge casting, based on our proven Double Column Machining Center Design, results in improved accuracy. Higher spindle speeds, increased thermal stability and improved tolerance control make Okuma Vertical Machining Centers the right choice. Our custom designed linear guideway system and precision-built way system assure optimal performance during high-speed machining or heavy-duty cutting. Our industry leading THINC - OSP Control allows for greater versatility and minimal downtime.
|
|
Main Features :
High-Precision Spindle with Low Thermal Distortion
- Stable & high-performance spindle
- Direct-driven spindle
- Jacket cooling
Loading Capacity
- Axis travels(X/Y/Z) : 1,150/550/550mm(45.3¡±/21.7¡±/21.7¡±)
- Table load capacity : 800kgf(1,764lb)
High-Efficiency & High-Productivity
- Rapid traverse : 40/40/30m/min
High-Efficiency Machining Control
- HAI(Hwacheon Artificial Intelligence)
- HECC(Hwacheon Efficient Contour Control)
- Tool overload protector
|
|
Optionally with Fanuc Control 0i-MB
Siemens 802D control
optionally with Fanuc OMD control
easy and comfortable operation
high-quality components for maximum reliability
linear guideways
rapid feed up to 950”/min.
16-station pneumatic tool changer
|
|
|
Okuma's powerful ACE Center is the foundation for vertical machining centers that meet the most exacting production needs. Okuma's solid bridge casting, based on our proven Double Column Machining Center Design, results in improved accuracy. Higher spindle speeds, increased thermal stability and improved tolerance control make Okuma Vertical Machining Centers the right choice. Our custom designed linear guideway system and precision-built way system assure optimal performance during high-speed machining or heavy-duty cutting. Our industry leading THINC - OSP Control allows for greater versatility and minimal downtime.
|
|
|
The structure is made of a machine bed with a sliding carriage in its rear section. Both are in electrowelded steel duly stabilized after each work phase to ensure that there is no interior tension; they are sized to guarantee stability and precision during machining operations.
|
|
|
Okuma's powerful ACE Center is the foundation for vertical machining centers that meet the most exacting production needs. Okuma's solid bridge casting, based on our proven Double Column Machining Center Design, results in improved accuracy. Higher spindle speeds, increased thermal stability and improved tolerance control make Okuma Vertical Machining Centers the right choice. Our custom designed linear guideway system and precision-built way system assure optimal performance during high-speed machining or heavy-duty cutting. Our industry leading THINC - OSP Control allows for greater versatility and minimal downtime.
|
|
|
The AZ150L rs a high-accuracy and high-efficiency vertical machining center that machines small-sized-parts wrth nano level accuracy, ft is equipped with counter balance axes to eliminate machine vibration. The AZt 50L can perform excellent and high accuracy machining tor both surface finish and profiles.
|
|
» 3-AXIS MILLING MACHINES
Slotted table, high Z travel
» Accurate 3D milling and engraving equipment optimized for the machining of the following materials :
. Aluminium
. Brass and alloy
. Synthetic resins
. Plastics and composites
. Wood and by-products
. Soft stones and marble
» Technology :
. Transmission by ballscrews on all axes with double ballscrew on X axis
» Solid and accurate equipment
|
|
This state-of-the-art CNC milling machine features
easy to use Siemens 802C CNC control and powerful axis servo-drives.
Linear guides on a solid cast-iron frame ensure optimum axis acceleration and high stability.
servo-drives on all 3 axes
pneumatic tool clamping
fully enclosed workspace
|
|
Heavy duty cutting & High speed machining
- Cartridge type of spindle : ISO 50 8,000rpm (Opt. 12,000rpm)
- High power spindle motor : 30/25kW(40/34HP)
- Jet lubrication : Hi-YUN (Sepcial lubrication oil]
- High dignity machining for large die & mold
- Large and wide stroke : 2,500x1.050x850mm(98.4*x41.3"x33.5")
- The widest table size in this class : 2,800x1.050mm(110.2*x41.3")
- HWACHEON's own software to control machining efficiency
- HAI (Hwacheon Artificial lntelligence)-Std.
- HECC (wacheon Efficient Contour Control)-Std. J) (Hwacheon Tool Load Detect)-Opt.
- NANO smoothing interpolation [with RISC Board)-Opt.
- OPTIMA HTLD-Opt.
- HATS (Hwacheon Auto Tuning SystenvOpt.
|
|
Machine specs
- axis travel: 17" x 14" x 8"
- rapid transverse speed: 1,400"/min
- axis acceleration: 1G
- spindle speed: 5,000 - 40,000rpm
Key Featured
- 16 position tool changer
- 40,000 rpm spindle
- glass scale feedback
- linear motor drives
Sodick's linear motor technology provides instantaneous servo time, which maximizes cutting efficiency. Since there are no ball screws or couplings, backlash is totally eliminated. This provides several advantages, including improved positioning and cutting accuracy, while providing smooth and vibration free table movement.
|
|
R1, the new vertical machining center, equipped with a cross table, is the expression of the Serrmac evolution could reach applying the latest and most advanced technologies, in order to improve the performances of the machine and to satisfy the requirements of a production which has to be particularly effi cient for precision and reliability.
X axis 460 mm-Y axis 370 mm-Z axis 420 mm with a Working surface 600 x 350 mm; Max spindle power 5.5 kW, Max spindle speed 10.000 rpm and Rapid feed 30 m/min.
R1 model is aveileble in two version: Tool storage with nr. 12 tool positions and Wheel tool storage with nr. 16 tool positions, RANDOM type selection and with double-grip.
The control board is installed on the right side of the machine and there
are located all the elements of control: alphanumeric keyboard, CNC 10,4”
video color with graphic to visualize the different machining programs, alarms and machine messages, all the manual controls.
|
|
With its ranges WINNER and NORMAPROFIL, MECANUMERIC offers to you various solutions for the applications of machining 5 axes.
Range NORMAPROFIL is intended for the machining of large thermoformées parts, rotomoulées, injected, and the manufacture of moulds and large-sized models.
The range WINNER which uses the architecture of the fixed gantry with a mobile table will be used for the applications of machining 3D of precision.
Many formats useful (X, there, Z) since 1000 X 700 X 600 mm for 3750 X 2250 X 1380 Misters.
|
|
|
Charlyrobot is the leader in the field with more than 8000 equipment sold in the training centres. These establishments are equipped with digitized axes, of electronic controls, mini-milling machines, numerical milling machines with control or stations of prototyping. You have the formation in line E-Formation.
|
|
|
MITSUI SEIKI High Production Machining Center Model VU65A with a 1500 mm by 600 mm Pallet. Numerically controlled with all standard equipment and features including: Automatic Tool Changer, and high production capability for drilling, boring, tapping and reaming. Integrated circuit logic, closed loop, complete electrical equipment for operation on: 3-phases, 50/60Hz, 200/220 Volts AC.
|
|
= MV-1003L =
With a highly rigid body and wide machining area, excellent operability is now possible.
The MV-1003 machining center aims for excellent operability. It has a rigid base suitable for large workpieces, as well as a smooth feed, a wide machining area, and high-speed, high-torque spindles. All of these allow effi cient work with no waste.
The MV-1003 produces fi ne, detailed workpiece shapes. This is a heavy-duty machine that combines fl exibility with strength.
* X-axis travel 3,500 mm (137.8 in.)
* Working surface 3,900 mm×1,020 mm (153.5 in.×40.2 in.)
* Table loading capacity 3,500 kg (7,700 lb.)
* Rapid traverse rate X-/Y-/Z-axis: 20 m/min (65.6 fpm)
* Hybrid type external chip conveyor (hinge type + scraper type with drum
filter)
(disposal to left) equipped as standard
|
|
= DuraVertical 5060 =
Dura means new value in machine tools
With its "strength through simplicity" and "high flexibility and versatility,"the Dura Series offers the "confidence of stable operation" and "high-precision, high-quality machining," with excellent cost performance.
In order to meet all the requirements demanded of a machine tool, we thoroughly refined the basic functions to create a completely new machine.
This new concept machine, which takes basic performance and reliability to the highest level, will provide powerful support for our customers' machining.
Both the width and depth are smaller than conventional machines, dramatically increasing productivity per unit area.
With a basic design which completely eliminates waste and maximizes travel on all axes, we have secured a large work envelope.
This greater travel makes it suitable for a wide range of workpieces.
|
|
Product Lines:
Vertical Center Nexus Series:
High Performance vertical machining center designed to provide the maximum value.
VTC Series:
Fixed table, travelling column vertical machining center available with either #50 or #40 spindle taper. Fast tool changes and high speed positioning.
Moldmaker & Super Moldmaker:
Double column Machining Centers for high precision dies and molds.
FJV Series:
High accuracy and high rigidity vertical machining centre featuring double column construction.
Mazatech V Series:
Column feed vertical machining centers.
Versatech V Series:
Large double column vertical machining centers which can machine all 5 faces in the same workpiece setup by automatically mounting a right angel head to the main spindle.
|
|
The Univers 4000, at the entry level of the Unisign range of vertical machining centres, is a very flexible and reliable vertical machining centre which offers powerful and accurate machining at a very competitive price. Typical features are the extended Y- and Z-axis of respectively 600 and 500 mm and the upgraded spindle of 26 kW (S1-100%) and 12.000 rpm.
The Univers 6 has gained the reputation of an extremely flexible and reliable machining platform that, due to its flexible design, has found numerous applications throughout the metalworking industry. The vertical clamping front, which has become a trademark for the UNIVERS machines, enables the integration of very specific features such as customer specific fixtures, horizontal and/or vertical rotary tables as A-, B- or C-axis, etc. The right angular head with automatic tool change offers multi-sided machining capabilities.
The Univers 6 C-1 is based on the very successful Univers 6 and is equipped with carousel turning station for components up to approximately Ø 1.000 mm x 400 mm.
The Univers 6 C-2 is similar to the Univers 6 C-1 but with two work zones to enable pendulum machining. Each work zone can be equipped with a carousel turning station.
|
|
A huge machining space allows for multiple-part machining and machining of large parts. The massive steel frame filled with vibration absorbing concrete serves as mounting surface for many different spindles. Designed for aluminium and massive steel machining.
Typical application examples
. Oil pans
. Converter housings
. Crank cases and cylinder heads
. Rear-axle housings
. Valve bodies
. Engine and cylinder head covers
. Differential cases
. Camshaft and crankshafts
. Wheel carriers
. Transmission cases
. Oil- and water pump housings
. Cross beams
Specification HCX 2000
. Travel X/Y/Z/a/B: 550/2000/550 (mm) /±200°/360°
. Work piece size: max. 550 x 550 x 550 (mm)
. Work piece weight:max. 450kg
. Repeatability X/Y/Z/a: ± 1,5 µm
. Feed rate A/B axis: max. 24.000°/min
. Feed rate X/Y/Z axis: max. 90m/min
. Spindles: up to 120 (on basis of MFK)
. Chip-to-chip-time: from 0,3 sek
. Spindle power : 1,5 kW bis 50 kW per spindle
. Spindle rpm : 100 - 36.000 U/min
(depends on project) optional up to 200.000 U/min
. Control: Siemens, Fanuc
. Length/width/height: 7.750/3.500/3.500 (mm)
. Weight: ca. 25 t (depends on project)
|
|
|
