|
|
The RH35 is a massive rigid way frame available with 40 taper spindle or available as an RH35XP with 50 taper spindle. With 120" x 35" travels and weighing over 36,000 lbs, this massive machine is our largest toolroom machine.
Powerful 24HP Closed loop spindle motor with optional Wye/Delta, 35hp Wye/Delta and two speed gear box on RH35XP
Extra heavy duty machining Center type spindle with 5 bearings. 40 taper on RH35, 50 taper on RH35XP
Spindle speeds up to 15,000 RPM, RH35XP 8,000 RPM
Rigid fixed head design
Table chip guard option
24 tool ATC option.
Coolant drip pan and rear splash guards optional
Heavy duty steel way covers
Extra long saddle offers excellent table support
AC Yaskawa digital AC servos
Graphic program verification
Rigid tapping
Rigid way construction
|
|
The Milltronics BR series machines are manufactured in the US and are very unique machines. They were designed for fabrication, pattern, and job shops that machine large light parts or patterns.
MACHINE FEATURES
- Economical Combination of Travels and Performance
- Ideal for Light & Moderate Milling of Metals
- 45 mm Linear Ball Way
Construction from
- Five Bearing (60 mm dia.) 8000 RPM Spindle with Air Purge & Labyrinth Seal
- Steel Way Covers
- Digital AC Servo Motors from Yaskawa
- HUGE Travels and Table Surfaces Designed to Fit Between the Lightweight Routers and Heavyweight Cast Bridge
Machines
- Large Diameter High Speed Precision Ground Ball Screws
- 24 HP High Torque Closed Loop Vector Spindle Drive
MACHINE OPTIONS
- 24 Pocket Carousel ATC
- Flood Coolant System
- High Speed Spindles 15K, 20K, or 24K
- Two Speed 24 or 35 HP Closed Loop Spindle Drive
- Digitizing
- 4th Axis
- Riser Blocks
- Auto Lubrication
CONTROL FEATURES
- High Speed 1200 Blocks/sec Centurion 7 CNC with Dual 32 Bit Processors
- Conversational and ISO Programming
- High Resolution Large Color LCD Display
- Feed Forward and Look-Ahead Option for Smooth and Accurate Machining
- Networking & Flash Memory Reader Options
- 12 Mb Motionless Disk Parts Storage Memory
- 8 Mb Extended Program Execution Memory with Large Program Editing/Execution
Capabilities
- Concurrent Programming
|
|
Electronic :
- Charlyrobot CNR3 micro-step digital control.
- 3 to 5 interpolated electronic axes.
- Communication: serial RS232
- Power supply 240 volts or option 110 volts single phase + earth
- Installed power: 2KW with HF spindle 1.1 KW.
Drive :
- Stepped motor, micro-step management.
- Ball screw diameter 12 mm with a thread of 5 mm on X, Y and Z.
- Guides by prismatic rails with ball recirculation shoes on X and Y.
- Protection of axes by lip seals on X, Y and Z.
- Greaser on guide shoe and drive ball screw bushing.
Options :
- Microlubrification
- Floating suction sensor in Z, for 2D application only.
- Standard 600 W spindle with speed converter by mecanical potentiometer on the spindle. Rotation of 8000 to 24000 rpm. Maximum tightening diameter of 8 mm.
- High frequency spindle 1.1 KW without tool changer with electronic frequency converter controlled by potentiometer on the front panel. Rotation of 6000 to 24000 rpm, EX20 collet with maximum tightening diameter of 13 mm.
- 4th axis (brushless).
- Bushless servo motors with CNR3 digital control, 3 axes extensible to 5.
- Vaccum table.
|
|
Electronic :
- Charlyrobot CNR3 micro-step digital control.
- 3 to 5 interpolated electronic axes.
- Communication: serial RS232
- Power supply 240 volts or option 110 volts single phase + earth
- Installed power: 2KW with HF spindle 1.1 KW.
Drive :
- Stepped motor, micro-step management.
- Ball screw diameter 12 mm with a thread of 5 mm on X, Y and Z.
- Guides by prismatic rails with ball recirculation shoes on X and Y.
- Protection of axes by lip seals on X, Y and Z.
- Greaser on guide shoe and drive ball screw bushing.
Options :
- Microlubrification
- Floating suction sensor in Z, for 2D application only.
- Standard 600 W spindle with speed converter by mecanical potentiometer on the spindle. Rotation of 8000 to 24000 rpm. Maximum tightening diameter of 8 mm.
- High frequency spindle 1.1 KW without tool changer with electronic frequency converter controlled by potentiometer on the front panel. Rotation of 6000 to 24000 rpm, EX20 collet with maximum tightening diameter of 13 mm.
Safety :
- Integral cover with 180° vision, very bright.
- Compliant with the European Directive "machine n° 98/37/CE".
- "Punch button" type emergency stop.
- Cover opening detection.
- Electromagnetic cover locking, controlled by the spindle.
|
|
CnCut C3 is a mill and engraving machine designed to make accurate cutting out of stone for sinks and cooking tops easy. The entire process is run from the integrated PC Windows® control panel. The user-friendly interface in the modern computer makes it possible to draw, change and save thousands of drawings and figures at the machine without any knowledge of CNC-technique.
The machine includes CnCutCam, a user-friendly software to make CNC programs of any sink or cooking top. The unique open gantry combined with a compact space-saving design allows for any size workpiece without having to take into account the machine tool envelope.
|
|
DATRON M7 :
The new DATRON machining system M7 will substantially increase your machining speed and quality. With a floor space of only 1300 mm x 1300 mm this compact machine offers a machining area of 500 mm x 500 mm x 240 mm. The solid Granite construction ensures very dynamic CNC milling and at the same time high surface quality. Robust high-torque machining spindles or precisions spindles up to 60.000 rpm are available, tailored to your application requirements. With this compact and low-priced "power house" the precise ma-
chining of Aluminium and Plastics in 2D or 3D can now be carried out much more effectively and economically.
|
|
Equipped with the most modern of drive and control engineering, the HAMUEL portal milling machines make it possible to maximise productivity and enable the greatest possible flexibility in processing of:
- steel
- cast materials
- fine zinc alloys such as ZAMAK, KIRKSITE etc.
- aluminium
- brass alloys
- plastics such as UREOL etc.
- wood
These machines are mainly used:
- aerospace industry
- automotive industry
- model and mould making industry
- mechanical engineering industry
- tool-making industry
- contract production
Machine specifications:
The specification depend exclusively on the customer's requirements, the machining centres in GANTRY design are availble for large parts or finished body shells. The working travel X is variable according to the customers's needs.
|
|
This state-of-the-art CNC machining center features wide box ways and a rigid cast-iron frame and is designed for effective
machining of heavy parts. Large doors provide easy access to the work space. The chips are collected in a chip tray, which can
be pulled out underneath the machine.
24-station tool changer with twin-gripper arm
hardened and ground box ways
servo drives on all 3 axes
an effective coolant system ensures long tool life
automatic central lubrication reduces maintenance
pneumatic tool clamping
totally enclosed work space
Standard Equipment:
|
|
The MECAPRO product line, with its working areas from 1000 x 1500 mm to 2000 x 6000 mm, offers a very attractive performance / price ratio.
The wide choice of spindles and functions will meet all requirements regarding the machining of materials with plates in average thickness such as :
plastics, composites, aluminium, wood and by-products.
The heavy MECAPLUS range is designed for the intensive machining of aluminium, composites and plastics in strong thickness.
Dimensions : 1000 x 2000 mm till 6100 x 2100 mm.
|
|
Isolated direct drive with automatic spindle cooling ensures optimum
thermal conditions at high loads
High-performance GPlus 450 control is user-friendly and network-ready
bridge design for high rigidity and maximum accuracy during high-speed machining
rapid feed speeds up to 1420 inch/min
high-power drives, spindle speeds up to 15,000 rpm
extra-large linear guides on all 3 axes
quick acceleration (up to 1 g) for shortest machining times
linear measuring system on all axes
|
|
Numerically controlled copy router with -90°, 0°, +90° and intermediate angles section rotation for working on 3 sides and quick release spindle for ISO30 cone. Z axis manual down feed with position display. The machine is manufactured in accordance with CE regulation.
|
|
Solid Universal Milling Machine for drilling and milling work requiring long travel distances
all 3 axes with automatic feed andrapid feeds
vertical head swivels ±45°
spindle speeds for horizontal and vertical spindle controlled by separate switch gears with oil-bath lubrication
capstan-controlled quill feed for drilling, manual micro-feed for milling
3 automatic quill feeds
for horizontal spindle operations, the top beam including head can be completely rotated on the stand
adjustable ground dovetail guideways on the X axis, and wide square guideways on Y and Z axis
clamping on all 3 axes
adjustable stops for drilling depth and table adjustment
|
|
» 3-AXIS MILLING MACHINES
Slotted table, moving gantry, intensive application
» Accurate 3D milling equipment optimized for the machining of the following materials :
. Aluminium of strong thickness
. Brass and alloy
. Synthetic resins
. Plastics and composites with high mechanical specifications
. Wood and by-products
. Soft stones and marble
» Technology :
. Transmission by ballscrews of high cutting area on all axes (diameters 40 and 63 mm on all axes with double ballscrew on X longitudinal axis)
. Numerous Numerical Controls available : SIEMENS SINUMERIK 840Di - FANUC 16i - NUM1050 - MECANUMERIC CN7000
. A wide range of electro-spindles from 6 to 18 KW and rotation speed till 40000 rpm
. Vacuum plate with turbines or vacuum pumps
» Accurate, fast and rigid equipment
|
|
Our FB-4 to FB-6 machines are intended in first line for production-oriented users. High chip-cutting power, precision and universalitiy are the main features of these machines. The working area is large enough to handle workpieces with a weight up to 600 kg. Our wide range of accessories covers everything you need to handle even the most complicated of milling jobs.
Produced acc. to ISO9001:1994
|
|
Universal Milling Machines with Cycle Control and Vertical Milling Head
Adjustable cams allow machine operation in semi-automatic cycle left/right or in automatic oscillating mode
Counter milling cut feature
Table swivels ± 45°
Sturdy square guide in both z and y directions (scraped on the UFM 4)
X-axis provided with dovetail guide
Electromagnetic clutch for feed gear
Clamping device in all axes
All operating controls are arranged centrally and within reach
|
|
Series GFV/GFY
X/Y/Z CNC Base Units
Series GFV / GFY
Effective travel ranges: from 440 x 480 mm to 1,380 x 2,480 mm, z-axis 220 or 300 mm
Clamping surface: from 625 x 1,100 mm to 1,500 x 3,050 mm
Portal passage: optionally 235 mm or 435 mm
Drive system: DC (series GFV) or AC (series GFY) servo drives, precision ball screw spindle
Travel speeds: 8 m/min (series GFV); 12 m/min (series GFY)
Repeatability depending: on the assembly of the plants; on average approx. 0.02 mm
Weight: 450 kg to 650 kg
Example of use
All linear axes of the linear units LES 5 (x- and z-axis) and LES 6 (y-axis) that are use here run on grinded steel shafts with linear ball bearings. Clearance-free ball screw drives with hardened and polished 5/8''-16 spindles with a pitch of, optionally, 2.5/4/5 or 10 mm are used as drives. The linear axes are driven by powerful and robust DC or AC servo motors in easy-to-maintain drive modules.
|
|
The D.L. Ricci Corp. "3 axis" Portable Milling Machines are our most versatile and accurate milling machine tool, capable of traveling and machining in all axis (XYZ). They are ideal for onsite machining large and small rectangular areas accurately. These Portable Mills can be clamped or bolted directly onto the part being machined or fabricated. Setup jigs and parallel-mounting fixtures can be used to position the portable mills for difficult work area conditions. Any machinist familiar with machining practices will find the Portable Milling Machines simple to setup and operate, even upside down.
These milling machine tools are designed for rugged onsite machining such as milling, drilling and boring applications on jobs that were previously thought to be impossible without extensive disassembly. The precision ground dovetails with adjustable gibs, to provide smooth, accurate travel in all axis.
When used as a facing mill, this milling machine tool will do a quick job of facing off pitted or misaligned surfaces, restoring the original condition of the part being machined. Servo power feeds are available for all axis, allowing the application of smooth and consistent power feed throughout the speed range, both in forward and reverse.
|
|
|
Charlyrobot is the leader in the field with more than 8000 equipment sold in the training centres. These establishments are equipped with digitized axes, of electronic controls, mini-milling machines, numerical milling machines with control or stations of prototyping. You have the formation in line E-Formation.
|
|
K2X The machines of Extremes
Very high speed and very high precision in 3D-machining.
Precursor of the very high HSM range, the structural calculations have lead to a very high-performance machine : feedrates and working speed up to 60 m/mn and acceleration up to 1g ; powerfull spindle which allows high swarf removal.
Rapidity and power are the best describing the HURON K2X. It allies swarf removal capacity and high machining speeds for 3D-finishing operations.
Milling centres type K2X have a high stability for machining the hardest materiel (machining in 65 Hrc steel have been made).
This milling centre is ideally suited for pieces up to 3000 kg such as injection moulds, foundry templates, cutting tools, aeronautical pieces, precision mechanical parts.
K2X 8
XYZ 700 / 600 / 450 mm
800 x 600 mm / 500 kg
24.000 rpm - 24 kW - 38 Nm
XYZ = 40 m/min
|
|
A modern machine with 5 NC-axes for parts of medium weight up to 6 tons and a working envelope of 2.5 x 2 x 1.2 m erected on an even foundation and featuring performance parameters to meet highest demands in metalworking industry.
The all-around enclosure permits a diameter of rotation of work pieces to be cut of 2200 mm. Chip and coolant discharge facilities are arranged above floor level. Automatic tool and pallet changers sustain universal application of machine as a machining center.
Comprehensive accessories such as various milling heads, NC facing heads and support bearings that can also be changed automatically are to enhance the universal application of this UNION machine.
|
|
TK 419/3 - 3-axis CNC vertical machining center with superior machining capability in Y (1600 mm). It features a clamping system made up of vacuum tables that allow panels and plates to be held by vacuum; this solution is useful to obtain an extremely efficient machining of thin components that could hardly be fixed by means of a traditional clamping system.
The TK 419/3 is equipped with a series of valves that turn on/off different areas of the machining table, thus concentrating the suction on one area and optimizing the clamping of components with limited dimensions.
This machining center is designed for drilling and interpolated milling operations on composite panels, panels and plates in aluminum, stainless steel, titanium and on aluminum profiles.
|
|
Drake GS:RM™Heavy Duty Rack Mills
The Drake GS:RM (Gear System: Rack Mill) produces steering racks for a major automotive manufacturer. Cycle time is less than 35 seconds. Its performance earned an overall perfect ten rating from the auto parts maker.
This four-axis machine features a customized automatic loading system designed to use specific alignment features that assure accurate, quick, repeatable loading. High-powered table vice clamps secure the part and feed jaws accommodate two part configurations with no changeovers required.
An available power helix on the milling spindle assists in fast changeovers to a variety of part configurations producing angles up to plus or minus forty-five degrees.
|
|
Laboratory Milling Machine, Model 160
For removing the work-hardened edges of tensile test specimens after blanking. The tensile test specimens are clamped individually of in packs into a milling fixture, then both sides are guided past the milling cutter. The result is a favourable parallelism in the measuring zone of the tensile test bar. The speed of the milling cutter is infinitely variable and can be preset between approx. 4,000 - 8,000 min-1 achieving an optimal cutting speed appropriate to the material.
|
|
■ Ideal for machining tough large parts
■ Positioning Accuracy: +/-0.000120" / full stroke
Repeatability: +/-0.00004"
■ Solid Boxways with 5 year warranty
■ Rigid Meehanite Cast Iron Construction
■ Powerful 2-Step (40 taper) and 3-Step (50 taper) Geared Spindles deliver high torque and high-speed for maximum machining flexibility
■ High Pressure Coolant System, Intelligent Advance Control System, Ballscrew Cooling standard
■ Table traverse design for optimum work envelope utilization
|
|
The AREA series moving gantry machines are a multi-purpose milling and engraving system develop from BIEMMEPI SISTEMI based on years of CNC milling machine manufacturing experience .The bed-plate is made of electro-welded stabilized steel and it’s designed to guarantee excellent mechanical stiffness and superior dynamic stability. The gantry, on which the X-axes carriage is assembled ,has been designed using one solid piece of stabilized steel.
The X and Y axes movements were designed with helical toothed ground racks and pinions, the linear guides were designed with caged balls and the Z axe travel (265 mm) incorporates a ground ball screw lifting system.
The fully digital BMPDIGIT numerical control has a user-friendly interface, based on Windows CE. A hand-held keypad interface with a LCD display allows the operator to control all the machine functions including jogging the machine, setting work parameters, tool preset, origin settings and remote computer system works file download (G-code or HPGL).
The automatic tool change system spindle is for ISO30 shank tool holders and has a power of 8Kw.
The manual tool change system spindle has a power of 6Kw and ERG32 tool holder collet.
Three different Area models are available:
AREA S: 1640x1025x265 mm
AREA M: 2540x1525x265 mm
AREA L: 3040x2025x265 mm
|
|
|
