|
|
Meets a large numbres of installation needs in industrial and similar premises. With a modern and attractive design it blends well into any seetting.
In version IP66, the DOMINO Systems offers a complete range of consumer units and sealed mounted enclosures for distribution assemblies. They are extremely flexible in the ways they can be used and may also be englarged.
|
|
2 types of enclosures are available, PLOMBIERES which is a monobloc enclosure and BLIGNY which allows to give the possibility to take out the back panel to make easier the wiring. These enclosures were designed to be able to receive customized mounting systems thanks to possibilities of steel and isolating modular distribution and accessories. The PLOMBIERES range is composed by 17 references with 7 different heights as the BLIGNY range has 20 references with 3 different heights.
These 2 ranges are completed by a wide range of accessories as the modular chassis, rails for brass terminals, depth adjustable brackets, vertical, width and depth profiles, ...
|
|
STAINLESS STEEL ENCLOSURES LA BUSSIERE
These enclosures are developed for food, chemicals, oil paper, pharmaceutical industries, ..., where it is required a strict hygiene or a high resistance to corrosion. We offer 2 types of polishing : brushed or micronized in stainless steel 304L (316 on request).
|
|
|
It is largest of electric box and the selection range was made more expensive, and it was New technology of the plastic Box. Big Box selected and supported by the packing development institute of industrial design. Through the use of special waterproof and dustproof tests, contained parts are protected well. The use is simple as big type Sensoe, Relay Box, Sleeve, Power Water Tool Box, Junction Box and Control Box. The dimension is 600x800x120 mm. All of the products are waterproof and dust-free. (IP66~67 NEMA 4X) Refer to the general catalogue of HIBOX on Direct-Industry or www.dsehibox.com
|
|
MODULAR ENCLOSURES FLEUREY
The FLEUREY enclosures have been designed as a complement of BLIGNY enclosures. They are welded made of sheet steel 15/10. The top and the base have been welded to the vertical pieces of the body giving more rigidity. The back and side panels are easy to install by quick fixing out. Enclosures FLEUREY have got 3 heights, 4 widths and 3 depths which is traduced in 33 types.
This range is completed by a wide range of accessories as the modular chassis, rails for brass terminals, depth adjustable brackets, vertical, width and depth profiles, ...
|
|
Kaedra is the best solution to produce with applications of high requirements a complete installation with combines 3 essential functions:distribution, power supply and electrical control;these enclosures mean natural compatibility and consistency:Kaedra range really lets save time and great flexibility.
Applications
Final LV distribution in outdoors or severe conditions (dust, humidity, heat, public...)
|
|
AS SERIES
Control panels designed for larger construction sites. The ASI series is particularly well suited to industrial construction sites: 400V neutral-free three-phase network.
|
|
CR SERIES
Intended for secondary distribution on construction sites, for the different areas of the construction trade and for dispatching power to different floors of buildings being constructed or renovated.
|
|
Cierre Progetta and produces to Electronic Cards, Modules and ended and resinati Pictures of power, Cables; on specific or design of the Customer.
|
|
The Orion range Plus IP65 was conceived to meet your needs for installation in specific medium (chemical aggressiveness, moisture, use in outside...).
The boxes are used on sites of the garage type, fair, greenhouse, swimming pool, camp-site...
modular box of distribution,
box of socket-outlet,
box of automatism.
There exist 27 boxes Orion Plus:
16 metal boxes,
11 polyester boxes and cupboards,
with very a great choice of depth of the boxes.
|
|
- quality sheet steel, body 1.25-1.5 mm gauge (depending on model), door 1.5 mm gauge
- zinced mounting plate, 2.5 mm gauge
- surface protected by powder coating, RAL 7032 structure
- earthing for body, door, and mounting plate
- foamed PU door gasket / high protection class (>IP 55, EN 60529 / double door model: IP 54)
- hinges open 140°/180° to the right, DIN compliant
- available in many sizes, pre-configured ready for use
- sash fastener 3 mm double bit (bar lock for 1200 mm or taller models), can be exchanged for any other common lock system
- zinced mounting plate provides basic EMV protection
- cable entry through sheet steel bottom gland plate
- rail systems, glazed doors, wall mounting lugs, locking systems and other accessories available as listed in Accessories for Wall Mounted Enclosures or on request
- Wall Mounted Enclosures also available in stainless steel
|
|
NOTE: All enclosed switches come with a black handle. However, most handles can be substituted with a red/yellow handle. Please substitute the handle suffix code (1st and 2nd from last characters) with the red/yellow handle catalog number suffix listed in the table to the left. There is no additional cost for a red/yellow handle of equal rating and style.
EXAMPLE: A red/yellow selector handle for an ENF161-3PBJ can be substituted for the black selector handle by using the "YJ" suffix instead of the "BJ" suffix, new catalog #ENF161-3PYJ.
|
|
Rittal Electronic Systems offer "complete know-how" in the field of
electronic packaging
at a high level - up to Level 4.
For CPCI, VME and AdvancedTCA applications.
This means "plug & play" systems for extremely high data throughput levels in telecommunications, in the network and server segment, in
automation, in traffic guidance systems and in medical technology.
System solutions in a modern design, with super-fast backplanes,
with integral power modules and with effective climate control
concepts.
|
|
|
These boxes are for distributing electrical power (maximum 40 KVA) to service industry, craft industry and manufacturing industry buildings: storage warehouses, garages, maintenance hangars, sheet metal workshops, wine cellars ...
|
|
THE CGO
This cupboard can be used for requirements in power higher than 36KVA and inferiors or equal to 250KVA. It is essential to the temporary food of the building sites starting from a station MT/BT of public distribution 400V and is in conformity with regulations EDF in term of provisional electric connections.
There exist 12 models various all manufactured out of welded sheet EZ 20/10. We propose 3 dimensions: 1715x1110x450 mm (for mechanical electro meter), 1715x1110x350 for 400A and 1565x960x350 for maximum 250A with a sealing IP53.
It shows the following characteristics: 1 door with key handle (closing 3 points + hasps of cadenassage), 2 handles of rabattablees transport, 1 canopy, 2 welded rings of lifting, shaped DIN welded (for supports of equipment), passage of the cables partly lower through cuttings, feet with anchoring welded (in option: base support on the ground), pre-drilling for lock EDF.
It is composed of the following equipment: 1 site EDF for panel of counting + meter, 4 connections in single-core cable - type U 1000R 2V- between cutting downstream and panel of counting, 1 cutting downstream with visible cut, 1 circuit breaker of adjustable differential connection of sensitivity and temporization, of the connecting terminals IP2X.
Certain option are also available.
|
|
THE CP: essential to very undertaken borrowing its energy from a public network, it is in conformity with regulations EDF in term of provisional electric connections. It combines standardized counting and the protection of the personnel for the version high sensitivity.
We have 3 "basic" models equipped with a turntable insulating, of 1 box standardized circuit breaker, 1 site EDF for meter, 1 circuit breaker of differential connection 500mA selective. 6 models high sensibilté supplement the series: it is the same equipment as the basic model with in more 1 differential protection high sensitivity 30mA and of the connecting terminals IP2X.
This box polyester, armed glass fiber, measures 450x350x200 mm or 520x540x300 (according to the models) and is IP43. It can be fixed at the wall and be closed by rectangle EDF. Its door can also be equipped with a base plate téléreport.
Various options are also available.
|
|
| ... products without technical information |
| |
|
|
