|
|
|
|
|
|
Spacial 3D.ATEX enclosure
The new "ATEX European Directive", relating to equipment used in explosive, gas or dust-laden atmospheres imposes significant improvements in safety of persons and equipment in chemicals,
refining, flour-milling, grain storage, etc. From 1st July 2003, only those products that meet the requirements of this directive can be marketed and installed.
* The Spacial 3D.ATEX enclosure range is ATEX approved by the LCIE under
reference number 02 ATEX 0037 U.
* Enclosures carry double marking:
- new approach: 00 81 Ex II 2 G/D,
- additional marking according to
EN 50014 and EN 50019 stadards: EEx e II.
technical characteristics
* Sheet steel enclosure.
* Degree of protection: IP66.
* Ambient temperature maximum permissible range -25°C to +40°C.
* External mechanical impact resistance: IK 10.
* Textured epoxy polyester powder paint finish, colour grey RAL 7032.
* Enclosures are fitted with 4 shouldered M8x25 backstuds for chassis attachment..
* Polyurethane seal.
* Compared to the Spacial 3D universal enclosure, the Spacial 3D.ATEX enclosure offers:
- 4 fixing holes fitted with 4 crimped blind nuts,
- crimped blind nut for external earth connection (earthing braid not supplied).
|
|
- quality sheet steel, body 1.25-1.5 mm gauge (depending on model), door 1.5 mm gauge
- zinced mounting plate, 2.5 mm gauge
- surface protected by powder coating, RAL 7032 structure
- earthing for body, door, and mounting plate
- foamed PU door gasket / high protection class (>IP 55, EN 60529 / double door model: IP 54)
- hinges open 140°/180° to the right, DIN compliant
- available in many sizes, pre-configured ready for use
- sash fastener 3 mm double bit (bar lock for 1200 mm or taller models), can be exchanged for any other common lock system
- zinced mounting plate provides basic EMV protection
- cable entry through sheet steel bottom gland plate
- rail systems, glazed doors, wall mounting lugs, locking systems and other accessories available as listed in Accessories for Wall Mounted Enclosures or on request
- Wall Mounted Enclosures also available in stainless steel
|
|
Rittal Electronic Systems offer "complete know-how" in the field of
electronic packaging
at a high level - up to Level 4.
For CPCI, VME and AdvancedTCA applications.
This means "plug & play" systems for extremely high data throughput levels in telecommunications, in the network and server segment, in
automation, in traffic guidance systems and in medical technology.
System solutions in a modern design, with super-fast backplanes,
with integral power modules and with effective climate control
concepts.
|
|
Meets a large numbres of installation needs in industrial and similar premises. With a modern and attractive design it blends well into any seetting.
In version IP66, the DOMINO Systems offers a complete range of consumer units and sealed mounted enclosures for distribution assemblies. They are extremely flexible in the ways they can be used and may also be englarged
|
|
|
|
|
|
This chapter illustrates the technical characteristics of FM enclosures for distribution
boards and of ILME industrial socket-outlets for which these enclosures are
designed.
It is possible to use SQ interlocked socket-outlets for industrial use (with or without
protection devices), simple flush-mounting Pluso socket-outlets (without interlock)
and compartments for modular units.
These components enable to configure a wide range of distribution boards, both
mass-produced (AS) and custom-made (ANS), suitable to meet all possible installation
needs.
FM enclosures for distribution boards offer tested reliability and can be used, in combination
with FM socket-outlets for industrial use, as integrated modular systems to
configure distribution boards for industrial socket-outlets. Distribution boards with
ILME enclosures and socket-outlets can be installed in:
- Industrial applications
- Services applications (commercial, exhibitions, etc.)
- Agricultural and livestock breeding applications
- Residential and similar applications (i.e. common areas of condominiums, cellars,
garages, community buildings, kitchens, etc.).
|
|
|
Electric steel boxes, with reversible frontal door and basic panel 20/10, meeting the standard INTO 60439-1, protection IP 55, also provided with transparent door and screen-door, dimensions of 300x200x150mm with 1200x800x300mm
|
|
NOTE: All enclosed switches come with a black handle. However, most handles can be substituted with a red/yellow handle. Please substitute the handle suffix code (1st and 2nd from last characters) with the red/yellow handle catalog number suffix listed in the table to the left. There is no additional cost for a red/yellow handle of equal rating and style.
EXAMPLE: A red/yellow selector handle for an ENF161-3PBJ can be substituted for the black selector handle by using the "YJ" suffix instead of the "BJ" suffix, new catalog #ENF161-3PYJ.
|
|
|
These boxes are for distributing electrical power (maximum 40 KVA) to service industry, craft industry and manufacturing industry buildings: storage warehouses, garages, maintenance hangars, sheet metal workshops, wine cellars ...
|
|
4.2 CONNECTION AND METERING SC – YELLOW RATE CGO SERIES
When power required is higher than 36 KVA and less than or equal to 250 KVA
Essential for temporary power supplies on construction sites from a MV / LV 400V public distribution station.
Meets the French electricity board's requirements for provisional electrical connections.
|
|
4.1 CONNECTION AND METERING SC – BLUE RATE CP SERIES
When power required is less than or equal to 36 KVA Essential for all companies that obtain their energy from a public network. Combines standardised metering with employee protection. Meets the French electricity board's requirements for provisional electrical connections.
|
|
Materials: Aluminum, Steel, Stainless steel, Zintec - 0.5mm to 3mm thick sheet, mild steel box section
Turret Presses: Trumph and Amada King
Brake Presses: 40 - 100 t and panel folder
Combined auto/manual powder/wet coat line 2000mm x 1200mm x 600mm.
Separate paint line including combined degrease/iron phosphate, wet paint booth & oven
Full spectrum welding MIG, TIG, Stud & spot welding - all manual
Power Presses: 55 – 500 t
Insert Machines: Haeger, Pemsert
Screen printing
Manual silk-screening process
CNC machining
Ajax milling m/c and Microcut milling m/c
Integration: Dedicated, enclosed 9500 sq ft assembly area (Floor ESD compliant)
|
|
modularity
consistent dimensional range, graduated and logical, enabling fast and adapted selection; precise correspondence of boxes means perfect alignment
MUREVA family
the junction box is at the heart of the MUREVA family, now comprising
enclosures, junction boxes and equipment
infallible
the patented mixed EVA/stepped entry enables direct entry of cables.
Cables and tubes are tightly retained for total sealing.
|
|
outdoor racks and enclosures
applications
- Mobile telephony: energy racks.
- LAN, WAN networks.
- Metering stations.
- Electronics.
range
- Metal or polyester «indoor» racks and enclosures.
- Metal (simple or double skin) or polyester «outdoor» racks and enclosures.
- EMC protection.
- Anti-vandalism protection.
- Anti-seismic protection.
- IP 42, IP 55.
- Cooling by convection or by cooling unit.
- Adapted to accept 19" components.
- Individual product configuration.
|
|
|
|
|
|
The Tern Way 800 pan assembly has been designed for easy installation, ideal for switchboard manufacturers and a wide range of specifications. A short time withstand rating of 35kA or 5()kA for I second makes this assembly one of the most versatile on the market. Busbar raiings are available at 800A and 1250A.
Key Features
• Busbar assembly and MCCBs manufactured in U.K.
• Fully shrouded busbars.
• Four possible frame sizes for outgoing MCCBs.
• Shrouding to IP20 protection.
• Terminal covers available for both line and load side terminals. (line side fitted as standard).
• All MCCBs are padlockable in both ON and OFF position.
• Easy connection onto assembly.
Specification
Manufactured in accordance with BS 5486 Part 1 (1990)/ EN 60 439-1 (1990). Busbar ratings 800 Amps and 1250 Amps. Fully tested for both 35kA and 50kA short lime withstand for 1 second. 6. 12 and IS triple pole versions which accept outgoing MCCBs from 125A frame size single pole to 250A frame size triple pole. 3 way triple pole version which accepts outgoing 400A frame size triple pole MCCBs.
|
|
| ... products without technical information |
| |
|
|
