- Hydraulics - Pneumatics >
- Valve >
- Electrically-actuated valve
Electrically-actuated valves
Pressure: 0 bar - 36 bar
Temperature: -40 °C - 125 °C
For air purging in system like DPF system, SCR system and also can be used as ON/OFF valve for controlling gaseous media.
Rotex Automation Limited
Pressure: 0 bar - 15 bar
Temperature: -40 °C - 125 °C
Auto Drain Valve with inbuilt water-in-fuel (WIF) sensor for water-fuel separator with redundancy feature in the form of ball mechanism to prevent any fuel leaks.
Rotex Automation Limited
Pressure: 0 bar - 5 bar
Temperature: -40 °C - 125 °C
Very economical version for coolant control valve for heating application in single chamber HVAC systems, Urea heating tank or Battery cooling in electrical vehicles or any other application involving coolant management.
Rotex Automation Limited
DN: 15 mm - 50 mm
Pressure: 25 bar
Temperature: -20 °C - 100 °C
... ...max. 90° Mounting position : vertical to horizontal (in relation to shaft) Materials Case : brass Valve ball : brass Valve shaft : brass Valve shaft gasket : NBR Gasket : PTFE ...
DN: 10 mm - 50 mm
Pressure: 16 bar
Temperature: -40 °C - 140 °C
FIP has developed a VKD DUAL BLOCK® ball valve to introduce a high reference standard in thermosplastic valve design. VKD is a True Union ball valve that meets the most stringent needs ...
FIP - Formatura Iniezione Polimeri
DN: 65 mm - 100 mm
Pressure: 16 bar
Temperature: -40 °C - 140 °C
FIP has developed a VKD DUAL BLOCK® ball valve to introduce a high reference standard in thermosplastic valve design. VKD is a True Union ball valve that meets the most stringent needs ...
FIP - Formatura Iniezione Polimeri
DN: 10 mm - 50 mm
Pressure: 10, 16 bar
Temperature: -40 °C - 140 °C
... addition to the manually actuated version, VKR is also available in electrically actuated VKR/CE configuration. Actuators are firmly connected to the valve by the special ...
FIP - Formatura Iniezione Polimeri
DN: 20 mm - 100 mm
Pressure: 25 bar
Nominal diameter DN 20...100 Nominal pressure PN 16. 25 Three-way design with short B -flange Spindle packing with chevron rings or long life torsion safe chambered bellows seal Easy to change the actuator orientation for operation and cabling access
RTK Regeltechnik Kornwestheim
DN: 20 mm
Temperature: 5 °C - 50 °C
SINTESI motorised valve – 2 way MM BRASS HEATING / COOLING / SANITARY WATER ON-OFF functioning, with 1 extra free micro switch on opening 2 points control actuator with relay Class protection: IP54 Operating time: ...
Comparato Nello S.r.l.
DN: 15, 20, 25 mm
Pressure: 16 bar
SINTESI motorised valve – 2 way MF BRASS HEATING / COOLING / SANITARY WATER ON-OFF functioning, with 1 extra free micro switch on opening 2 points control actuator with relay Class protection: IP54 Operating ...
Comparato Nello S.r.l.
DN: 15, 20, 25 mm
Pressure: 16 bar
SINTESI motorised valve – BY-PASS BRASS HEATING / COOLING / SANITARY WATER ON-OFF functioning, with 1 extra free micro switch on opening 2 points control actuator with relay Class protection: IP54 Operating ...
Comparato Nello S.r.l.
DN: 40 mm - 250 mm
Pressure: 17.2 bar
... FDV-3W-DE1 Deluge system is actuated electrically and resets remotely. An electric detection system activates a 3 way solenoid valve through a control ...
DN: 40 mm - 250 mm
Pressure: 17.2 bar
... minimum head loss * The valve trips open automatically upon a gradual release of water pressure from its control chamber. The valve is actuated by an electric signal ...
DN: 50 mm - 1,000 mm
Pressure: 16 bar - 420 bar
... complete the control valve construction. These control valves are designed according to the modular assembly principle, can be equipped with athena GROUP actuators and valve accessories ...
Athena Engineering S.r.l.
DN: 20 mm - 300 mm
Pressure: 16 bar - 420 bar
Single-seated Control Valve body material: Carbon Steel, Stainless Steel, Alloy Steel, Duplex Steel end connection: operation:the PDL series pneumatic diaphragm actuator, PCL series pneumatic ...
Athena Engineering S.r.l.
DN: 40 mm - 450 mm
Pressure: 16 bar - 420 bar
... Control Valve body material: Carbon Steel, Stainless Steel, Alloy Steel, Duplex Steel end connection: operation: PDL pneumatic diaphragm actuator、PCL pneumatic piston actuator、Electric ...
Athena Engineering S.r.l.
DN: 50.8, 3, 4 mm
Pressure: 10, 16 bar
Temperature: -10 °C - 140 °C
... Bi-directional zero leakage butterfly valve.ISO Pad for mounting, Gear Operator /ActuatorExtremely small play between the stem and disc due to ‘Double D’ drive.Accurate dual stem sealing prevents leakage.Butterfly valve ...
AWF
AWF
AWF
DN: 1.5 in - 10 in
Pressure: 0 psi - 144.2 psi
Temperature: -15 °C - 80 °C
... Diaphragm design Float valve has one major function and that is to stop the flow of water from an inlet supply line. The float valve rises as the water level rises. Once a specified water level is reached, ...
DN: 100 mm - 3,000 mm
Pressure: 16, 10, 25 bar
Temperature: -40 °C - 200 °C
... Manually and electrically operated - Possibility to be used as a safety valve (positive safety valve able to close even in case of tampering) In addition to the above ...
DN: 25 mm - 1,200 mm
Pressure: 2.5 bar - 100 bar
Temperature: -45 °C - 200 °C
Di Nicola manufactures ball valves type floating and trunnion mounted alloy carbon steel ASTM 216 WCB / GP 240GH + N and stainless steel with high nickel content ranging in size and nominal pressures in accordance with ...
DN: 50 mm - 500 mm
Pressure: 10, 6 bar
Temperature: 180 °C
One-piece body, tight-closing, centric disc With blow-out proof shaft Design for mounting between flanges according to DIN EN 1092-1 Face-to-face length according to DIN EN 558-1-R20 Leakage rate A according to DIN EN 12266-1 For ...
Herberholz GmbH
DN: 50 mm - 400 mm
Pressure: 10 bar
Temperature: 60 °C
... EN 558-1-R20 Leakage rate A according to DIN EN 12266-1 For all gases according to DVGW worksheet G 260 Safety shut-off valve according to EN161 class A (closing time < 1s) Approval according to DIN EN IEC 61511, ...
Herberholz GmbH
DN: 50 mm - 400 mm
Pressure: 10 bar
Temperature: 60 °C
... Leakage rate A according to DIN EN 12266-1 For all flammable gases according to EN 437 and other neutral gases Safety shut-off valve according to EN161 class A (closing time < 1s) Approval according to DIN EN IEC 61511, ...
Herberholz GmbH
Pressure: 303 bar
Temperature: 121 °C
... Sentry TSV is a self-contained, mechanical device that protects operators, analyzers and sampling components from high temperature liquids. It is an economical and reliable mechanical replacement for ...
DN: 50 mm - 300 mm
Pressure: 0 bar - 16 bar
Temperature: 120 °C
Cast iron (GJL 250) PN 16 gate valve ANSI 125 FF/BS 5150 FF face to face inside screw brass trim for electric actuator. Made in Italy. Fields of application: Industrial plants - Sewage Water - Water ...
DN: 10 mm - 50 mm
Pressure: 10, 16 bar
... NPT threaded connections • Pneumatic actuator DA, NO, NC or with electric motor 230V / 24V • Box with limit switches position indication (electromechanical and / or inductive) Advantage • High quality ...
DIVATEC,SL
DN: 15 mm - 50 mm
... with fluids with small solids without dead spaces in the ball • PVC-U, PP-GF • Possibility of pneumatic actuator DA, NC or electric motor 230V / 24V Ball valve completely injected ...
DIVATEC,SL
DN: 65 mm - 150 mm
Pressure: 16, 10 bar
... are glued, soldered, wafer or flanged DIN or ANSI • Electric motor 230V / 24V or pneumatic actuator DA, NC, NO. • Positioner 4-20mA / 0-10V • Indication of position – inductive / electromechanical • ...
DIVATEC,SL
Pressure: 0 bar - 250 bar
Flow rate: 0 l/min - 25 l/min
— RPCED1-*/T3 is a three-way flow control valve, pressure and temperature compensated with electric proportional control and mounting interface in compliance with ISO 6263 (CETOP RP121H) standards. — ...
DN: 20 mm - 200 mm
Pressure: 0 mbar - 500 mbar
Temperature: -20 °C - 450 °C
VF VFT VFH Butterfly valves for air and gas VF, VFT and VFH butterfly valves are designed for regulation and control of air and gas flow. Valves can be operated ...
Alco Offers a full range of electrically actuated ball valves that can be supplied in sizes 1/4” to 2 1/2” and pressure ranges from 1,000 psi to 10,000 psi. A full complement of accessories ...
The modulating control valves of the newly conceived MDV-D1 series are built according to the EN 161 norms to be used on industrial combustion systems. They are particularly suitable for the proportional regulation of ...
ECONEX S.R.L.
Pressure: 12 bar - 50 bar
Temperature: 0 °C - 80 °C
This metering valve is developed by I.L.C. srl. It is being offered with manual, pneumatic as well as electrical actuations. In addition, the metering valve is meters out the lubricant ...
DN: 10 mm - 25 mm
screw connection G 3/8” – G 1” DN10 – DN25 material specifications housing, not in contact with medium: POM plastic (polyoxymethylene), natural white threaded cover: POM plastic (polyoxymethylene), natural white srews: galvanized ...
Ho-matic
DN: 80 mm
Pressure: 6 bar
... the VZ series manual or control pinch valve encompasses the sleeve -the essential part of every pinch valve- and a body. The pinch valve sleeve can be connected directly to the closing ...
DN: 50 mm - 600 mm
Pressure: 1 bar - 10 bar
The type C Knife Gate Valve for bulk material is a unidirectional wafer valve which was designed especially for bulk material technology (powder or granulated materials). The Knife Gate Valve ...
DN: 25 mm - 320 mm
Pressure: 75 mbar - 1,000 mbar
Temperature: 35 °C - 150 °C
Field of application: Semiconductors, FPD / CVD systems and industrial processes.
VAT Vakuumventile AG
DN: 0.25 in - 3 in
Pressure: 41.4 bar
1/4 to 3 in. (8 to 80mm) Description: Series EMVII-6400-SS Electric Motor Valves are used in commercial HVAC zone control and light industrial applications. It consists of a bronze body construction, ...
The control valves with actuator are primarily used within the industrial plants to maintain operating conditions such as flow, pressure, temperature and liquid level by fully or partially opening or ...
FAMAT
DN: 0.5 in - 56 in
... forged steel gate valves. Its gate valve iron gate are resilient or metal-made with metal-seated, PN10 to PN16 or ANSI 150, sizes ½” to 40”. It also provides an ANSI 150, 300, 600, 1500, 2500, sizes 2” ...
FAMAT
DN: 0.5 in - 24 in
... available for the class 4500 series Globe valves. These globe valves have an Electric or pneumatic actuators, limit switches, locking devices and position indicators ...
FAMAT
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining