Electrically-operated solenoid valves

DN: 10.5, 25, 16 mm
Voltage: 24 V
Temperature: 0 °C - 50 °C

... compact design and aluminium body, the valves and solenoid valves Series D are suitable for a wide range of industrial applications, from traditional uses right through to more innovative ...

DN: 1.3, 1.8 mm
Voltage: 12, 24 V
Temperature: 0 °C - 55 °C

... flows with more stroke Specifications *********** Valve Type: 2-Way or 3-Way, Normally-Closed or Normally-Open, Fully-Ported (3-Way) Medium: Compatible Fluids (40 micron filter recommended) Air ...

Voltage: 24 V
Pressure: 150,000 Pa

For reliable control of the coolant flow: Bosch solenoid valves are designed with decades of experience in thermal, fluid and energy circuits. Due to their robustness and design optimized for volume flow, ...

Voltage: 12 V
Pressure: 150,000 Pa

For reliable control of the coolant flow: Bosch solenoid valves are designed with decades of experience in thermal, fluid and energy circuits. Due to their robustness and design optimized for volume flow, ...

Voltage: 24 V
Pressure: 150,000 Pa

For reliable control of the coolant flow: Bosch solenoid valves are designed with decades of experience in thermal, fluid and energy circuits. Due to their robustness and design optimized for volume flow, ...

Voltage: 31, 11 V
Temperature: -10 °C - 50 °C
Pressure: 3 bar - 8 bar

... requirement for simplicity. It consists of a solid base that accommodates pneumatic and electrical connections, the electronics and up to 4 valves. A comparison with a modular EB 80 for 4 valve ...

DN: 13 mm - 50 mm
Voltage: 110, 230, 24 V
Temperature: -10 °C - 60 °C

The poppet valve with diaphragm seal for control of air or water is suitable for all-purpose use with either medium. • Brass or stainless steel casting design • Electrical connection via solenoid ...

DN: 13 mm - 50 mm
Voltage: 24, 230, 110 V
Temperature: -10 °C - 60 °C

The poppet valve with with diaphragm seal for control of air or water is suitable for all-purpose use with either medium. • Brass or stainless steel casting design • Electrical connection via solenoid ...

DN: 10 mm
Voltage: 5 V - 24 V
Temperature: -40 °C - 49 °C

... 15 psig and power as low as 318 mW, genvi is the ideal candidate for high flow control solenoid valve applications flowing air or gas. The new genvi solenoid valves ...

DN: 7 mm
Voltage: 3 V - 24 V
Temperature: -40 °C - 49 °C

LHD Series valves are compact, 7 mm conventional control solenoid valves intended for medical and scientific applications flowing air or gas. Available ...

DN: 7 mm
Voltage: 3 V - 24 V
Temperature: -40 °C - 49 °C

LHL Series valves are compact, 7 mm magnetically latched control solenoid valves that feature ultra-low power consumption (as low as 5.5 mJ/switch), low noise, and flow rates as high ...

DN: 2.6 mm
Voltage: 12 V
Temperature: -20 °C - 60 °C

... Kuhnke pilot operated solenoid valves are a reliable solution for different applications ranging from machine automization until pre-control of process valves for the ...

DN: 2.6 mm
Voltage: 12 V
Temperature: -20 °C - 60 °C

... Kuhnke pilot operated solenoid valves are a reliable solution for different applications ranging from machine automization until pre-control of process valves for the ...

DN: 2.6 mm
Voltage: 24 V
Temperature: -20 °C - 60 °C

... Kuhnke pilot operated solenoid valves are a reliable solution for different applications ranging from machine automization until pre-control of process valves for the ...

DN: 2.3, 0.8, 1.6 mm
Voltage: 24 V
Temperature: 0 °F - 149 °F

Electrically controlled valves, Series 3/2 A-EVC, for vacuum and compressed air applications. Three body styles to choose from: • Manifold Mount A-DI: For mounting directly to a Mounting ...

DN: 10 mm
Voltage: 12, 230, 120, 24 V
Temperature: -20 °C - 100 °C

... -way solenoid valve has a completely plastic encapsulated coil. The armature is sealed by a bellows made of PTFE backed by an additional safety diaphragm. The valve body is available ...

DN: 2 mm
Voltage: 12 V - 230 V
Temperature: -20 °C - 100 °C

... -way solenoid valve has a completely plastic encapsulated coil. The armature is sealed by a bellows made of PTFE backed by an additional safety diaphragm. The valve body is available ...

DN: 0.125 in - 0.25 in
Voltage: 110, 24 V
Temperature: -10 °C - 50 °C

DIRECTLY OPERATED SOLENOID VALVES The direct control solenoid valves are particularly indicated for the assembling in any position thanks to their ...

DN: 1.5 mm - 4 mm
Voltage: 12 V - 220 V
Temperature: -10 °C - 140 °C

VQ direct electrovalves, are particularly suitable to control water, air, inert gas, steam and for all fluids in general (not aggressive). The extremely compact brass body, gives to them the possibility to be used in very small places. They’re ...

DN: 25 mm - 150 mm
Voltage: 12, 24, 9, 110, 220 V
Temperature: 70 °C

The RAF 33P electric valve is a Normally Open (N.O) line pressure hydraulically actuated. The RAF 33 (N.O) valve opens when 3-W electric solenoid valve ...

DN: 8 mm
Voltage: 24 V - 230 V
Temperature: -40 °C - 85 °C

High pressure solenoid valve for hydrogen refuelling - 500 bar - DN 8 - 2/2 NC - ATEX Based on the 1000 bar version, the HyValve 500 solenoid valve offers a smaller ...

DN: 15 mm
Voltage: 230, 24 V
Temperature: -40 °C - 85 °C

High pressure solenoid valve for hydrogen distribution - 500 bar - DN 15 - 2/2 NC - ATEX With the largest orifice size currently available on the market, the specialised high-pressure hydrogen dispensing ...

DN: 0.5 mm
Voltage: 230, 24 V
Temperature: -50 °C - 85 °C

High pressure solenoid valve for hydrogen refuelling - 1000 bar - DN 0.5 - 2/2 NC - ATEX In our range of specialised solenoid valves for hydrogen dispensing, this ...

DN: 0.8 mm - 4 mm
Voltage: 12 V - 48 V
Pressure: -1 bar - 12 bar

General purpose high flow proportional valve. Orifice up to 4 mm. Versatile seal (NBR, FPM, EPDM, PTFE, etc...) and body material (stainless steel, brass, Aluminum or plastic) available to adjust to the gas or liquid.

DN: 0.8 mm - 4 mm
Voltage: 12 V - 24 V
Temperature: 0 °C - 50 °C

... wide versatile general purpose media separated solenoid valve for water, aggressive fluids, and gases. Especially recommended with concentrated liquid chemicals such as fertilizer, acids, bases. Valve ...

DN: 1.6 mm
Voltage: 12 V - 24 V
Pressure: 0 bar - 30 bar

High pressure, low leak, instrumentation valve. Specifications Pitch [mm]: 22 Function:2/2 NC/NO Fluidic connection: sub-base Max pressure [bar]: 30 Orifice size [mm]: 1.6 Media: Gas Body: Stainless Steel Seal: ...

Temperature: -20 °C - 50 °C
Pressure: 350 bar

Direct operated solenoid valve DSA3-S3/11N: main features The DSA3-S3 / 11N solenoid valve is applicable – as a system part – to the UP series pumps ...