Electromagnets

50 companies | 197 products
Magnets
  • Category
  • Configuration
    Submit
  • Other characteristics
    Submit
  • Product applications
    Submit
pallet electromagnet - max. 19 W, 6 - 220 V | 7612

The 7612 Series of Clapper Electromagnet, manufactured by Tec Automatismes, is specifically...

pallet electromagnet - 6 - 220 V | 7613

The 7613 is manufactured by Tec Automatismes, and is available in two...

electromagnet - max.52 mm , 6 - 230 V | 7176

The 7176 Linear solenoid is available in pull type, push type and through type design. The solenoid features 6 to 220 VDC 6 to 230 VAC power supply, DC 10.3...

electromagnet - max. 27mm, 6 - 230 V | 7142

The 7142 Linear Solenoid is available as a pull type, push type and through type. It operates on a power supply of 6 to 220 VDC and 6 to 230 VAC, and has a nominal power at 100% duty...

electromagnet - max. 40 mm, 6 - 230 V | 7165

The 7165 is a linear solenoid manufactured by Tec Automatismes. It is available in different types of pull, push, through.

The...

{{productDetail[8614]}}
holding magnet - 36 - 30 000 N

The unit is a permanent electromagnetic holding system that is available in circular, flat and rectangular models. The magnet consists of a magnet enclosure that has a DC-excitated...

permanent holding magnet - 8 - 3 500 N

The unit is a permanent electromagnetic holding system that is available in circular and rectangular models. The magnet consists of a permanent magnet which is embedded in a magnet...

permanent holding magnet - 8 - 3 500 N

HAHN CQ LINE door gripping magnets can be utilized predominantly as sealing tools of fire fences for placing them in an open condition. This product conforms to the German Institute for Structural...

{{productDetail[18419]}}
permanent holding magnet - 8 - 3 500 N

Embedded-design solenoids is Magnetbau Schramme’s specialty. Regardless of your requirements, if it is at all possible, we will design the correct electromagnet/solenoid that you need...

grab electromagnet - EG1 series

Electrical holding magnets are magnet systems that come with an open magnetic circuit. They hold ferromagnetic objects when they are activated. The holding...

holding magnet - EG

The EG model is a holding solenoid that are constructed with an open magnet circuit. When generated, the holding...

{{productDetail[64145]}}
electromagnet - GA series

The GA series is a line of shut-down actuators manufactured by Kuhse. It performs...

fire protection holding magnet - FT series

The FT 65 is a holding solenoid manufactured by Kuhse. It is suitable for use in fire...

holding magnet - GTo series

There are no moving parts in the GTo electromagnetic units and they have totally sealed magnetic coils. The devices...

{{productDetail[62796]}}
grab electromagnet - 150 - 1200 N, IP65

The series of holding magnets cover a broad range of power and sizes, from the smallest version with 140N holding force, and largest version with 1200N force. These tools...

grab electromagnet - 150 - 1200 N, IP65

Penny Giles harnesses the power of innovative engineering to deliver advanced and custom-specified solutions for an array of applications. The company's extensive experience spanning decades, coupled with superlative...

pallet electromagnet - 1.3 / 4 mm

The flapper solenoids is a unit manufactured by Penny Giles company. These solenoids give high performance on short...

{{productDetail[4591]}}
holding magnet - HT-D20-F-24VDC-100%ED

The Holding Solenoid, manufactured by Kendrion Kuhnke Automation GmbH, can generate with a nominal voltage of...

holding magnet - HT-D25-F-24VDC-100%ED

The Holding Solenoid, manufactured by Kendrion Kuhnke Automation GmbH, can generate with a nominal voltage of...

holding magnet - HT-D30-F-24VDC-100%ED

Holding solenoids are used for stopping, lifting and conveying. An electric current or permanent magnet can activate the holding position. The preferred holding...

holding magnet - HT-D40-F-24VDC-100%ED

Solenoids are usually designed to meet the client specifications including different...

holding magnet - HT-D50-F-24VDC-100%ED

The HT-D50-F is a holding solenoid that is constructed in a diameter of 50mm and operates in a nominal voltage...

{{productDetail[852]}}
direct current holding magnet - CT series

The Abtrasmissioni DC holding solenoids of the CT series are capable...

{{productDetail[7184]}}
direct current holding magnet - CT series

The coils in this line are naturally operated in in applications involving solenoid valves, for any sector. The units consist of a number of models...

direct current holding magnet - CT series

The Electromagnet is holding solenoids developed by Sirai. It is mainly constructed to operate in DC. The unit is built based on a...

{{productDetail[7131]}}
direct current holding magnet - CT series

Custom Solenoids from Deltrol Controls presents a more comprehensive series of basic solenoids that can be accessed with DC solenoids, AC solenoids...

{{productDetail[12092]}}
door-holding holding magnet / explosion-proof - EX II 2G EEx m II T6

Dictator offers a range of explosion-resistant door-holding electromagnets, which belong to group II of explosion-resistant devices. They are approved for use in dangerous locations of classification...

fire protection holding magnet - 24 VDC, 130 N - 5000N

The holding solenoid is manufactured by Dictator, and is highly suitable for hold open systems on fire protection doors. It is also utilized for the flush installation of the EM GD...

holding magnet - EM GD ST/RM

The EM GD ST/RM offers a series of holding solenoid also known as electromagnets, that are integrated with feedback contact. They are most commonly used in applications that require the indication of the counter...

electromagnet - DICTATOR EM GD

The Dictator electromagnets are usable in any type of operation. Aside from magnets for the allowed use on fire protection doors, the magnets are generally utilized in machine construction...

{{productDetail[15657]}}
direct current holding magnet - - 5000N |RI series

For more than two decades now, the OSWALD Company manufactures electromagnets for very strong magnetic fields.

The water-cooled OSWALD magnets for strong magnetic fields...

{{productDetail[17385]}}
fire protection holding magnet - 20 - 80 mA | VIR20245048

- EN 1155 Certified
- All the fire door holder magnets include articulated
and fix armature plate
- HRV High Resistance to Vandalism...

{{productDetail[72354]}}
fire protection holding magnet - max. 80 mA, 24 V | VIR5024

For over 40 years, The Ogallala Electronics Division of Arnold has manufactured electromagnets (shaped field magnets) made of thin-gauge copper or aluminum foils as well as the more economical wire wound type. The shaped field magnet, sometimes referred to as a solenoid, approaches the ideal for flexibility in generating magnetic fields so desirable for klystron, TWT, ion implantation, chemical...

{{productDetail[7281]}}
permanent holding magnet - M2003 series

The general provisions for Electromagnetic devices and components were considered in accordance with DIN VDE 0580 during development/design.

Permanent clamping electromagnets are permanent magnets with an electrical release and are distinguished from clamping electromagnets by the fact that the clamping force...

{{productDetail[7279]}}
direct current holding magnet - 12 - 24 VDC | CT series

For retaining applications between a fixed and a mobile part.

Power...

direct current holding magnet - 12 - 24 VDC | CT series

The technical staff at System di Rosati are at your disposal for the design and creation...

{{productDetail[15993]}}
holding magnet - 1.6 - 40 W | VEM series

Description

The attraction and holding of the magnetic...

holding magnet - 10 - 75 W |ERM series

Description

The attraction and holding of the magnetic...

holding magnet - 2.6 - 45 W |VM series

Description

The attraction and holding of the magnetic pieces are made by permanent magnets...

holding magnet - 11.6 - 80 W | VM/ND series

Description

The attraction and holding of the magnetic pieces are made by permanent magnets...

holding magnet - 250 W | ERMI2000/60

ERMI2000/60 TYPE

Description

The attraction and holding of the magnetic pieces are made...

{{productDetail[22260]}}
electromagnet - 12 V

Small circular electromagnets are ideally suited for automated parts handling...

electromagnet - 24 V

VOLTAGE: 24V
CURRENT:...

electromagnet - BPV series

Widely used in electric motor manufacturing and centerless grinding applications....

electromagnet - EM series

AEC AC powered electromagnets have all the same great
features...

{{productDetail[23047]}}
electromagnet - EM series

Typical applications are:
Cyclical moving operations of metallic pieces by robotized arms.
Lifting of parts and metallic materials in general of considerable weight also.
Holding of metallic pieces during...

electromagnet - max. 75 W | B series

The electromagnetic holding force Fh (necessary for detaching the
piece in a perpendicular direction to the electromagnetic surface)
depends from the following factors:
Magnetic gap between the electromagnet and the piece. The magnetic
holding is maximum if...

electromagnet - max. 33 W | B2 series

Body: Iron Fe35; surface treatment: phosphatizing for epoxy or...

{{productDetail[24218]}}
electromagnet - max. 33 W | B2 series

Tubular Electromagnets to be...

{{productDetail[22042]}}
electromagnet - max. 33 W | B2 series

Shih-Shin Electromagnet is designed and manufactured with maximum power output, quiet operation, stable temperature rise and low friction...

{{productDetail[26062]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation