|
|
A SIMCO anti-static bar with airknife combine the effects of air amplification and ionisation to produce a high-velocity ''sheet'' of ionised air (amplification ratio as high as 25:1). This combined effect can be used for static neutralising and dust removal in a single operation, for instance in the automotive finishing, printing, packaging, plastics and textile industries. The airknife is very compact and does not have any moving parts. SIMCO anti-static bars produce an electrical field which causes air molecules to break down into positive and negative ions. These ions are
picked up by the high-velocity airflow produced by the airknife and propelled into the work area where they neutralise the charged surface or product.
|
|
Model 957Ex consists of a Meech 910Ex static eliminator bar mounted on to a linear air flow amplifier (air curtain). It produces a high speed, laminar beam of ionised air for long range static neutralisation and dust removal. It is available in a variety of lengths. The 910Ex Bar is BASEEFA approved for use in hazardous areas. (EXs IIA T6 - Zone 1 on 2). II 2 G Gas group IIA Temp Class T6
Features
Laminar air flow Reduces recombination of ions, increasing effective range
Easy maintenance Optimum performance and equipment life
High speed air flow Long range ionisation capability
Air amplifier Reduces compressed air consumption
|
|
957 - Ionising Air Curtain
The Meech Model 957 Ionising Air Curtain is an extremely versatile unit that provides effective static neutralisation and dust removal in a wide range of industrial applications. The unit comprises a Model 910 bar mounted on to a linear air flow amplifier (air curtain) to produce a high speed, laminar beam of ionised air. The Model 957 requires a compressed air supply. High voltage input is provided by a Model 904 power unit
Technical Characteristics
Operating voltage 7kV
Maximum temperature 85°C
Weight Approximately 1.1Kg per metre length
Construction (air curtain) Extruded from aluminium
Air consumption 112 litres/min at 5 bar pressure per 25mm of air curtain length (4.3cfm at 80psi per inch length)
|
|
JetStream Ionising Air Knife System
Unbeatable performance, unrivalled efficiency
The Meech JetStream ionising air knife system is more than just a piece of equipment. It's a world-beating solution to contamination removal. Capable of being used in a diverse range of applications - both large and small - JetStream's unique technology provides ultimate performance combined with outstanding energy efficiency.
World leaders in Static Control and Air Technology
No-one knows the specialist fields of static control and air technology better than Meech. The practical benefits can be seen at work in JetStream. Unique design characteristics such as integral ionising bars, deliver important benefits - including enhanced performance and extended lifespan - that help you to maximise the return on your investment.
|
|
|
|
|
|
Static Eliminator - Air-Blade Ionizer:
The Standard Air-Blade Ionizer combines the superior designed Standard Air-Blade™ Air Knife with a quality static bar made by Haug, a world leading static control manufacturer. Charges can be eliminated quickly, even over large distances and surface area.
The Standard Air-Blade Ionizer uses a small amount of compressed air for a powerful, and adjustable force with "laminar" flow to eliminate charges in applications where static bars cannot reach or where high speeds are a factor.
Normally the Standard Model RN Haug brand static bar can address most applications. For extremely high speeds and high charges the extra powerful VS model is used. For washdown applications (such as pharmaceutical areas), even a washable model is available at extra cost.
All Haug static bars come with a patented safety connector and fully shielded cable. The power supplies are "repairable" and are so well made, that we offer a two year warranty on them (one year on the bars).
Features:
- Connections on the back or ends
- It flows from end to end (full flow).
- Stainless steel models are available for high temperature and corrosive models.
- Models are designed for easy cleaning and prevention of dirt entering the static bar, minimizing potential damage.
- Patented connectors with the ground intrinsic to the cable design.
- Instant ON/OFF with no moving parts.
- Repairable Power Supply with a two year warranty.
|
|
|
Ionizing Air Knives deliver a curtain of ionized air over a distance to both large and small parts that need cleaning or neutralizing. SCI provides both a standard and a high output airknife with ionization. The AK1200 is our standard ionizing air knife. The AK 2200 is our hi-output ionizing air knife.
|
|
|
The blowing anti-static bar with curtain of standard air ELCOWA ECOFLOW, allows by the power of its air blast ionized the neutralization of the electrostatic loads. The association of a capacitive electrode ECA 88 B and of a slope of blowing to laminar flow creates a curtain of ionized air. This one allows, by its power and its strong ionic concentration, the neutralization of the electrostatic loads remotely and the expulsion of the parasitic particles.
|
|
• Blower and air knife systems custom designed to cool conveyorized products down to ambient temperatures
• Let us know the starting and ending temperatures and throughput rates
• Eliminate expensive compressed air and reduce energy usage by 75%
• Products are CE Registered with IEC Motors
• Sonic is an ISO 9001:2000 Registered company
• Most Blower/Motor assemblies shipped in 5 days from receipt of order
|
|
|
Great volumes of airflow can be generated in very tight spaces due to the compact size of the Super Air Knife. Flow and force are easily controlled with a pressure regulator, allowing fast or gradual cooling. Shims can be installed if additional hard-hitting velocity is required.
|
|
|
|
|
|
WALL HOT AIR GENERATOR "GS"
GS-060
DESCRIPTION:
Farming hot air generator completely autonomous with heating gas oil, natural gas or liquefied petroleum gases (butane gas, propane gas) operation.
These equipments function is that one of heating the environmental air by means of the thermal energy produced by the equipment.
The produced heat is driven to the premises that must be conditioned by means of two centrifugal fans.
The combustion products are extracted through a chimney in order to ensure that the driven hot air is exempt of smokes and bad smells.
The main features are the following ones:
-Heating gas oil, natural gas or liquefied petroleum gases operation.
-Closet made with galvanised sheet, covered with polyester dust and dried in the oven at 200ºC.
-Combustion oven designed for obtaining a performance of 92%.
-Electronic control with a display of the temperature driven to the premises.
-Environmental thermostat with a five-meter hose included in the equipment.
-Double deflection air impulsion grid.
-There is the possibility of coupling a digital time-programmer in order to start the equipment up and stop it automatically according to users’ necessities.
|
|
Daikin wall mounted units have a space-saving,
modern profile and have been designed to be
mounted high up on walls. This makes for optimum air
distribution throughout the room and whisper-quiet
operation. The FTXG/CTXG design wall mounted unit
is sleek, compact (only 15 cm deep) and very stylish in
material, shape and colour. The front panel is made
of transparent synthetic material with a matt crystal
white or matt crystal silver surface. It is no accident
that the FTXG/CTXG was awarded the ‘Good Design
Award 2004’, a prestigious distinction in Japan in the
industrial design field.
For more information or other types of air conditioning for your home, please go to the link and you will be connected to the official Daikin site.
|
|
|
This unit's lambada-shaped heat exchanger has a wide suction area which increases the air intake enabling the unit to adjust to the room temperature quickly. The output is a powerful sweeping airflow eliminates that dead zones and improves the cooling and heating effect while the trapezoidal blades cut the air diagonally to minimise air resistance, which reduces noise and improves efficiency. For easy maintenance the unit has a washable carbon and anti-bacteria air purifying filter.
|
|
SLIM-IN Line
Door/Wall mounting System description
Specifically developed for door or wall mounting, the air conditioners of the series SLIM-IN cover a cooling capacity range from 850W to 2500W.
They are available in 230V (and some items in 400V).
Common to most of the SLIM-IN models is the Maintenance Free concept.
All models are equipped with an electronic board (not for EVE08).
::Reciprocating hermetic compressor with thermal amperometric protection ::Ecological R134a refrigerant, CFC free ::Condensing and evaporating heat exchange coils in copper pipe with aluminium fins ::Internal and external fans on ball bearings with internal thermal protection ::Electronic board EBB (For EVE08 Internal mechanical thermostat set at 35°C, dead band 4°C) ::Power supply wire 3m long ::Steel sheet front cover powder painted RAL 7032 orange peel ::Zync plated frame
Optionals
::Stainless steel frame and front cover ::Not standard colour (RAL) ::Electronic board EBB (not available for EVE03)
|
|
|
|
|
|
The thermal management program is a computer-aided calculation system for switch cabinet air-conditioning.
It takes care of all the worries associated with production standstill caused by overheated switchgear systems.
The program contains databases of the Eldon enclosures, their dimensions, the conditioning devices (filter/fans, cooling units, heat-exchangers) and a selection of the most used electrical components with their heat dissipation. Additional databases can be created within the program.
After having chosen the enclosure type and size, given all the environment conditions (enclosure situation, required equipment temperature, ambient temperature and heat dissipation), the program will propose the most appropriate conditioning solution. A calculation report can then be printed.
To allow the installation study of the cooling devices on the enclosures in the early stage of a project, dimensional drawings of all the devices will be provided in CAD system DXF and AutoCAD file formats soon. You can find the different dimensions in our datasheets.
|
|
All APEX air-conditioning units are HOMOLOGOUS for the motor industry and are recognised as being among the best performing, above all in harsh environment, such as workshops, factories, forges, foundries, blacksmith's and paint shops.
APEX condensers are specially designed and installed to operate WITHOUT FILTERING ambiant air. Their surfaces and installation are one of the key points in the overall performance of the entire APEX range.
We have developed a specific range of air-conditioning units for outdoor and marine applications. They are portable and/or suitable for operating in all weathers.
|
|
Air condensation can operate at temperatures up to 71 °C.
Air condensation technology can be used to air condition a cabinet when there is no industrial water supply.
Apex Technologies is the first to market a range of very high temperature air condensation air conditioners, specifically suited to extremely difficult industrial environments (foundries, forges, iron and stell market, thermal treatement, ovens, cranes...)
This technology is fully compatible with the features of other vertical air condensation air conditioners in our range: cutout, wiring, components, operation without air filters thanks to very wide blades, separation of air flow...
|
|
+ filterless maintenance-free
+ cooling performances 600...2000 W (L35/L35)
+ space-saving ex./internal mounting
+ flat design-sheet steel housings
+ customer specific painting
+ stainless steel models
+ Microprocessor controls
+ R134a refrigerant
|
|
Mini size Maxi cooling for small enclosures
+ filterless maintenance-free
+ cooling performance 200...500 W (L35/L35)
+ for external, internal & top mounting
+ flat design sheet steel housings
+ customer specific powder coat painting
+ stainless steel models
+ Micro-processor controls
+ R134a refrigerant
|
|
| ... products without technical information |
| |
|
|
|
|
• Pitot tubes Type L : pitot tube with ellipsoidal head. An intake for total pressure and 6 holes for static pressure. Body made of stainless steel.
• Pitot tubes Type L with TCK : pitot tube with ellipsoidal head. An intake for total pressure and 6 holes for static pressure. Sheated thermocouple K probe integrated, with connection cable length 1,5 m. Body made of stainless steel.
• Pitot tubes type S with TCK : pitot tubes with TIG welding and protective tube made of stainless steel. Sheated thermocouple K probe integrated, with connection cable length 1,5 m. Body made of stainless steel.
• Air Flow Measuring blades DEBIMO : simple and cost effective method of providing permanent air flow measurement in rectangular or circular ducts. When used with a KIMO differential pressure device (pressure, transmitter, electronic micromanometer, liquid column manometer, differential pressure switch, ...).
DEBIMO air flow measuring blades ensure accurate indication, control or recording of air flow velocity and volume. Permit velocity measurements from 3 to 100 m/s (9 Pa to 10000 Pa).
Join our distribution network all over the word....Contact us !
|
|
|
|
