|
|
Vector SOLO
Our World Famous Electrostatic Technology comes up with a new Cordless Gun that stands out – And Alone – in the liquid coating Industry.
Vector Solo is the result of years of work to develop a cordless electrostatic gun worthy of the Ransburg name and the quality tradition we’ve upheld world wide.
This new low pressure spray gun represents an extraordinary accomplishment
representing significantly improving paint atomisation, transfer efficiency, durability and operator comfort with complete compliance with European Environmental Legislation.
• Cordless portability and convenience
- no generators or controllers
• Superior atomisation and transfer efficiency
• Lighter weight with superior ergonomic balance
• Quick and easy to set up „straight from the box“
• Lower running costs and maintenance.
|
|
|
The Estaquick is a quick disconnect electrostatic air atomizing spray gun. The spray head is lathered directly in Peek material to make it robust and compatible with all paint materials available in the industry. The gun disconnects for service in less than 5 seconds thanks to an easy 90° turn mounting bracket.
|
|
ITW Ransburg expands the Vector line of manual electrostatic spray guns with the introduction of the Vector AA90
The Gun combines superior airassisted airless atomisation technology with powerful electrostatic features, all in one gun. This integration results in a comfortable, lightweight gun with superior spray pattern characteristics, unmatched 'on gun' fan pattern adjustability with extraordinary high transfer efficiencies.
|
|
The Vector Solo AA combines airassisted airless technology with proven atomization in a portable, cordless model. With superior Ransburg electrostatics, this gun delivers advanced spray pattern characteristics, unmatched pattern adjustability and extraordinary transfer efficiency.
Solo’s cordless design increases flexibility. Operators have a greater range of movement to achieve consistent applications. The superior
ergonomic balance improves user comfort and lessens fatigue for an
increase in productivity.
Vector Solo AA’s efficiency, convenience and versatility helps to lower your bottom line.
|
|
|
100,000 volts of FirstPass Power™ gives you the ability to coat your parts right the first time - every time. OptiFlex "smart" technology stores your application settings for easy recall in any coating scenario. Quick, easy-to-learn procedures reduce training needed to turn operators into manual powder coating experts. "On-gun" remote controls adjust coating mode and powder delivery without requiring operators to turn away from their work.
|
|
|
|
|
|
The new revolutionary Encore manual powder spray system is packed with features, the Encore system provides coaters with unsurpassed operating control, coating capability and ease of use for an unprecedented level of coating for performance on demand.
The Encore system features plug-and-play design for easy set-up to help you quickly take advantage of greater coating efficiency, productivity and quality than ever before.
The new Encore gun is exceptionally compact, lightweight and well balanced, and features truly functional On-Gun* controls and bright LED display. The all-digital control unit also features large, bright LED displays, and combines unmatched ease and flexibility of operation with true, closed-loop flow control for consistent, repeatable coating coverage, part after part.
The new, highly efficient Encore powder pump flows more powder with less air for a softer, more powder-rich spray pattern to speed painting and further increase transfer efficiency while also lowering air consumption. And the new mobile platform accommodates both a fluidized hopper and all-new vibratory box feed unit for maximum operating flexibility.
The Encore system is available in five mobile configurations that include two vibratory box feeder and three different capacity fluidized hoppers, to best suit specific powder coating operations. Stationary configurations to accommodate rail, stand or wall mounting are also available.
|
|
|
The Nordson Sure Coat powder spray system provides a solution with patented Select Charge technology, which allows you to choose the ideal electrostatic parameters for your particular application. With it, you can achieve a level of coating quality, efficiency and consistency.
|
|
|
|
|
|
SPRAYMIUM the new electrostatic paint gun from SAMES and KREMLIN
SPRAYMIUM is a paint gun combining ergonomics, reliability and performance of application. It is dedicated to companies wishing to improve their application process by facilitating the work of the operator.
SPRAYMIUM combines Innovation and Experience in providing access to low pressure and high pressure spraying technologies, the qualities of AIRMIX and VORTEX ® which are guarantees of high quality for industrial finishing.
All components offer a technological breakthrough leading to an optimization process of formal painting.
SPRAYMIUM offers controls on the rear of the gun from where the operator can, with a single hand, choose from 3 pre-set electric settings and from there the flow management painting is done instantly. These electric settings are modifiable by the operator in order to better adapt to the types of items to be painted.
A pressure sensor integrated into the gun is used to know in real time pressure for a very precise adjustment of the spraying and perfect repeatability on a daily basis.
This is a patented novelty, exclusive to SPRAYMIUM.
SPRAYMIUM means also the dedicated control module SPRAYBOX, extremely friendly, easy to use, based on simple icons and easily understandable. The module can work immediately with the application programs preset. Of course, the operator can adjust these programs to their needs easily thereafter.
|
|
|
|
|
|
Powder coating equipment : MACH-JET
Reliable, ergonomic and performant. MACH-JET has been specially designed for companies looking to improve their powder coating application. This has been achieved by improving the overall efficiency of the operator.
MACH-JET is a new cart design using revolutionary materials. This allows for easy mounting, provides storage areas and has an integrating air gun for quick powder cleaning. Its plastic design makes cleaning very easy.
MACH-JET is a very light gun, which integrates controls on the handle from where the operator can choose (with only one hand) from 4 preset characteristics of application. The powder flow can also be controlled from the handle. Three luminous diodes permit to the user to visualise the program in use. This is exclusively available only on MACH-JET.
A rotating connector below the handle makes the user’s movements easier, it protects the powder hose from pinching, the couplings are precise and fatigue is reduced. This special device allows a quick release for any maintenance operation.
MACH-JET is a very user-friendly control module that is very easy to work-with. The control setup permits work to be conducted immediately with the use of preset operator programs. The operator can adjust these preset programs if desired.
The whole module is integrated on the front part of the cart. It is mounted on an inclined plane so that the operator can have easy access to the readout.
|
|
The Meech Model 954 is a hand-held ionising air gun for neutralising static charge and removing dust contamination in a wide range of industrial processes. The ergonomic, lightweight design of the 954 provides simple, quiet and effective operation. The 954 is powered directly from the Model 904 (refer to separate datasheet) and requires a clean, dry compressed air supply.
Technical Characteristics
Max pressure 7 bar (Typical usage 2 bar)
Operating voltage 7kV
Max temperature 85°C
Construction Machined aluminium outer body and with PTFE inner sleeve.
Weight 950 g including 3 metres of cable.
Cable 3 metres of H.T. cable supplied as standard. Longer lengths can be specified when ordering.
|
|
|
Ionizing air guns neutralise static charges on several materials and clean the surface using ionized compressed air. Neutralising the static charges makes it easier to blow-clean the surface and prevents dust and dirt particles from being reattracted. The compressed air used for this purpose must be free from oil and water. The guns are connected to a power unit which supplies the required high voltage.
|
|
The Meech Model 955 is a hand held ionising blow gun for removing static charges and dust in a range of industrial applications. The portable Model 955 has been designed to provide efficiency in both cost and performance. An electrical centrifugal fan provides high velocity air flow, avoiding the need for a costly compressed air supply. Ionisation is provided by titanium emitters located in the nozzle of the gun, powered by a high voltage DC source. The 955 requires just a standard single phase 240V supply, thereby making the unit fully portable.
Features
Small and compact. Easy to locate and install in confined spaces.
Only maintenance requirement is periodic cleaning around emitter pin. Easy maintenance and minimum downtime.
Flexible knuckle trunking extension Delivers ionisation precisely where it is needed. Effective in "difficult to reach" places.
"Stay put" knuckle trunking. Enables simple and quick installastion.
Rapid decay times Highly effective in sheer feeder applications.
|
|
|
Meech's Model 251 Ion Gun is a robust, lightweight injection moulded product for use with the Model 233v3 Pulsed DC Controller. It is suitable for contamination blow-off and neutralisation of static charges in electronic applications and cleanroom environments. It is quick, easy and safe to use. Supplied with 2 metres of cable as standard.
|
|
Ionized Air Gun is a hand-hold air gun designed to neutralize the static charges and removing dust particles from the surfaces in the industrial applications. High technology used in design can produce more efficient results for static electric problems even in high-speed applications.
It provides high performance and efficient ionization with fast discharging time. Gun seperates air molecules to positive and negative ions by the electric field it generates and transports them.
|
|
Ionizing Air Guns
Ionizing air guns are excellent tools to enhance the cleaning of products that hold particles to them due to electrostatic attraction. By breaking the bond of static, the compressed air or nitrogen driven, ionizing air guns provide impact pressure to dislodge stubborn particles that reduces yields, especially in Medical Packaging, Electronics and Plastics Fabrication.
|
|
Static elimination air gun
The static eliminating air gun TISP-N is an efficient tool to remove dusts on plastic and other insulating surfaces, combining ionization effect and a powerful air blast. Comfortable, compact and lightweight, the TISP-N has been designed for an intensive use. The width of its nozzle makes it easier to treat larger areas. The TISP-N is recommended to neutralize static charges and remove dust manually off parts before such operations as painting or metal plating
|
|
Air-assited handheld gun eliminates static charges while cleaning the surface.
FEATURES:
- Buit-in high voltage transformer can be connected directly to 12V DC or the supplied 12 V DC PowerPack.
- Cable/air hose combined connection from top or bottom of gun
- Integral holder allows the gun to be counter-balanced, preventing the gun from being damaged
- Stainless steel electrode housing keeps the electrodes free from bearkage and dust/debris build-up
- Trigger sensitivity and light weight does not cause operator fatigue
- Built-in air hose eliminates the eed to install a seperate air line
- Integral grounding connection insures operator safety from shock
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
