|
|
LAWECO guaranteeing their customers 'short notice' deliveries within a maximum of four weeks as from January 2002. Not only has the price level been kept unchanged for the majority of products, but quality and safety further improved. This holds especially true for the optimised maintenance free roller bearings. The exclusion of the less costly bush bearings entails a significantly longer operating life and a higher degree of utilisation. The self-contained base frame of the lift table does not require subsequent grouting, thus offering an unrivalled quality standard with its torsion resistant frame construction
LAWECO supplies the scissor arms exclusively of solid material instead of frame sectional steel in order to improve the stability and robustness of the lift tables even more. Freely adjustable limit switches leave the operator with more flexibility and permit him to universally use the lift table within its useful stroke. The maintenance supports are designed for the individual maximum load. The comprehensive installation kit, comprising of dowels, setting screws, shims etc. is included in the price. The li
|
|
LAWECO guaranteeing their customers 'short notice' deliveries within a maximum of four weeks as from January 2002. Not only has the price level been kept unchanged for the majority of products, but quality and safety further improved. This holds especially true for the optimised maintenance free roller bearings. The exclusion of the less costly bush bearings entails a significantly longer operating life and a higher degree of utilisation. The self-contained base frame of the lift table does not require subsequent grouting, thus offering an unrivalled quality standard with its torsion resistant frame construction
LAWECO supplies the scissor arms exclusively of solid material instead of frame sectional steel in order to improve the stability and robustness of the lift tables even more. Freely adjustable limit switches leave the operator with more flexibility and permit him to universally use the lift table within its useful stroke. The maintenance supports are designed for the individual maximum load. The comprehensive installation kit, comprising of dowels, setting screws, shims etc. is included in the price. The lift table can be connected by means of a CEE plug and is supplied ready for installation. The compliance with all required European safety related regulations goes with
|
|
Optima - Hymo Lift Table AX
Hymo AX Lift Tables offer value-for-money solutions to lifting related problems at virtually all workplaces. The height-adjustable platform ensures a comfortable working position which helps to improve efficiency and enhance the quality of finished work.
Adjusting the working height is smooth and easy due to the constant raising/lowering speed over the entire lift travel. The scissor-action lift’s robust pivotal arms and torsion bars combine to provide exceptional stability. Low noise operation makes the Hymo AX a pleasure to use.
Accessories
Hymo AX Lift Table can be customised for specific applications to ensure optimal performance. Built-in features such as hydraulic powerpack and control box are available in a range of specifications and single-phase operation is available on certain models.
Capacitiy: 500 - 2000 kg
Lift travel: 800 mm
Platform length: 1200 - 1350 mm
Platform width: 800 mm
Double-scissors unit for half-pallet format
Capacitiy: 400 kg
Lift travel: 800 mm
Platform length: 800 mm
Platform width: 600 mm
|
|
|
This robust equipment for the goods-handling industry is so tough that you can even drive a truck over it. This unit is the ideal firm and safe solution whenever extra convenience is required during effort-saving loading or unloading.
|
|
|
Southworth is the world's leading supplier of lift tables. We have the broadest product line, largest inventory of stock models, the most flexible range of modifications and most experienced designers. This site contains detailed information and specifications for a variety of lift tables and accessories.
|
|
You can save the high cost of dock construction, work from any truck bed level to grade level and handle unstable loads quickly and safely with Dock Saver Lifts. These lifts can be installed indoors or outdoors and will handle all loads up to 20,000 lbs.
For applications where the height of the truck bed must be adjusted, Southworth also offers a line of extra heavy-duty truck levelers in capacities from 5,000 to 20,000 lbs. to meet even the most massive load requirements.
|
|
Particularly safe:
- New double safety protection through safety microcontact rail beneath the shear blades·
Particularly economical:
- Modular design (accessories) allows more economical retrofitting
- Long service life due to optimized bearings (needle bearings) 20 cykles per hour, 2-shift-operation·
Particularly productive:
- Harmonious, jolt-free raising + lowering movement
- Optimum ergonomics due to precise product positioning·
Particularly flexible:
- High mobility when changing the work station
- Simple assembly, installation due to plug-in coupling connections·
Particularly compact:
- Low height of only 80 mm
- Minimum dimensions of the lifting table with reference to the Euro-pallet and skeleton container
|
|
SHT 100: The mobile, ergonomic high-speed lift table
- with a flexible goal height for production and logistics
With our mobile high-speed lift table goods are brought again and again very quickly, securely and comfortably on a selectable goal height. The goods can be then infered from all sides.
vertical lift: selectable from 700mm up to 1400mm
speed: 1400mm in 6 seconds
goal height: 800 up to 1400mm
load width: 800 up to 1400mm
load length: 800 up to 1600mm
additional load according to agreement
You adjust the goal height of the table at the place of work and lower the plate to the ground. You push the goods on the plates and bring them on goal level in only 6 seconds. Now you can push the goods on a bordering table.
Discover the various application types!
|
|
Backsaver Lite Lifts
These industrial grade lift tables are specifically designed for those applications involving lighter loads of up to 1,500 lbs.
They are available in four standard configurations:
Stationary, Compact with high lift and small footprint, Portable with easy rolling casters, and Powered Portable with battery powered drive.
|
|
With this innovation Laweco can offer their customers an increased level of availability, reliability and precision at comparable conditions.
Other benefits are specified in more detail, in particular with regard to the automobile industry. The advantages worth highlighting in this area are the precise positioning accuracy and excellent loading cycle. This is combined with a high lateral stability together with a uniform, harmonious motion – the Framo® push-pull chains play an important role in this. Laweco push-pull chain lift tables are distinguished by their low maintenance and long service life.
High lifting speeds and the environmental protection due to a hydraulic oil-free system, round off the advantages for the customer.
|
|
Optima - Hymo Lift Trolley TX
The Hymo Lift Trolley is an easy-to-manoeuvre transport and lifting aid for all workplaces. It’s the ideal way to move and lift heavy or awkward loads to exactly the right position and height for assembly, packing, inspection, servicing and storage. It needs no power connection and so can be used anywhere. Simply press a foot pedal to raise the patform and another pedal to lower it.
- Capacitiy: 300 - 500 kg
- Lift travel: 520 - 700 mm
- Platform length: 850 - 1060 mm
- Platform width: 520 - 600 mm
|
|
LAWECO-lifting platforms with spindle drive are a further development of, and complement to, the LAWECO hydraulic scissor lift platforms which are extremely successful in the market.Typical applications are wherever hydraulic oil is not desired, a high reproducibility throughout the entire effective stroke and low noise operation are required as well as specified heights must be absolutely observed.Lifting platforms with spindle drive meet these requirements:
High availability – Safety – Precision
Areas of application: Automobile industry – Chemical industry – Rubber industry – Loading area.
Higher, faster, reliable.... Our customers take these points for granted.
The lifting platforms are used in 3 shift operation for years to come. Reliability becomes standard.
Plant integrated lifting platforms are used in machine lines for feeding and stacking down as well as to bridge the height differences.
Wether in the automobile industry, food industry, chipboard production, steel and sheet metal processing or aircraft industry LAWECO plant integrated platforms ensure a trouble-free material flow.
|
|
Our goods only lifts are used in the industry to provide transport solutions for load shuttling between different levels.
The regulations for these lifts are far less constraining than those for goods lifts allowed to carry personnel.
Our lifts are CE certified, they comply with Machine Directive 98/37/CE and norm project PR EN 81-31.
Our lifts can be delivered with a self-bearing frame. A shallow pit allows for the cabin floor fitting at ground level. Some lifts can be fitted on the ground, with access through a ramp.
A 3D drawing is supplied for the integration of the lift in your building.
We can of course supply all peripheral protections, servo-driven doors and gates, carry out the installation, trying out as well as the maintenance (maintenance contracts).
In order to meet most of your requirements, this range of products can operate with 3 different technologies: column hydraulics, scissor hydraulics and electric winch.
|
|
Our goods only lifts are used in the industry to provide transport solutions for load shuttling between different levels.
The regulations for these lifts are far less constraining than those for goods lifts allowed to carry personnel.
Our lifts are CE certified, they comply with Machine Directive 98/37/CE and norm project PR EN 81-31.
Our lifts can be delivered with a self-bearing frame. A shallow pit allows for the cabin floor fitting at ground level. Some lifts can be fitted on the ground, with access through a ramp.
A 3D drawing is supplied for the integration of the lift in your building.
We can of course supply all peripheral protections, servo-driven doors and gates, carry out the installation, trying out as well as the maintenance (maintenance contracts).
In order to meet most of your requirements, this range of products can operate with 3 different technologies: column hydraulics, scissor hydraulics and electric winch.
|
|
When our standard products can not meet your requirements, our team specialised in mechanical construction, the technicians of the R&D Department, (equipped with 2D and 3D CAD systems) work with you to design tailor-made products.
The means at their disposal and their combined experience in the field enable us to find the solutions to the constraints of your projects.
The ACI elevation R&D Department, composed of creative and experienced men, will draw 3D drawings taking into account your environment, your specifications and other technical constraints...
|
|
Specific lift table:
Rise, rotation, reversal.
Realization on demand for adequacy with the customer need.
|
|
Moreover there are other types with tilting platform up to 90° and with conveyor belt.
Platform type PH3 has double height and a capacity load of up to 5,000 Kg.
Platform PT has triple height and a maximum capacity load of 2,000 Kg. SITES plans and builds platforms with
capacity load 50Kg to 100Tons.
In the sector of drawing mills and rolling mills, SITES ST division
|
|
- Standard Lift tables and to measure
- Other products
Tables TEUP, tables of quay,
tilting lift tables,
tables for installation
of workstation,
palletization/depalettisation
- Examples of uses
Logistics/Storage
Bottling
Agribusiness industry
Industry
Pharmacy
Metallurgy
Car
Aeronautics
Glass, wood...
|
|
Lift Tables
Models TE1100, TE 1100 EN, TE1200 PSR/EN
* Hardware that can be integrated in the preparation bays
* Loads from 2,5 mt. to 2,8 mt. (2,8 T to 3,1 T) depending on the model
* Work height of approximately 1000 mm (39,37 inches)
|
|
|
SITES produces several types of lift tables , to suit any industrial lifting requirement. PN3: single platform with loads capacity up to 30,000 Kg. and available in different sizes. Besides the standard platform there are special types with wheels and extractable drawbar, double length, with engine-powered traverse and cradle platform for spools or coils.
|
|
ACI scissor docks are specially designed to solve the problems of height difference between docks and trucks. They allow easy loading and unloading operations, whatever the height of the dock or truck bed, even when you do not have a loading dock.
This solution provides a permanently level board and more important course than with a dock leveller.
Our scissor docks are CE certified and comply with EN 1570 standard, as well as "Machines n°98/37/CE Directive".
The board is made of non-slip steel treadplate. The design of these boards enables them to withstand static or dynamic loads such as trolleys, pallet trucks, all types of forklift trucks...
The scissor docks are usually pit mounted, therefore providing access from dock to truck or dock to yard.
|
|
Tables with scissors conform to standard NEN IN 1570 and marked EC.
Hydraulic valve of speed control, Wheels with protection of the feet.
Model LT-WH300-15 has a mechanism with double scissors.
Pedal of descent of control at double speed.
Protection of control anti falls of loads.
Double brake.
Protection of the feet.
|
|
Loading ramps - electro-hydraulic platforms
Designed to compensate any differences in height between the loading docks and the differing truck load platform heights, KOPRON ramps are planned and built in compliance with existing EEC regulations. KOPRON carries out thorough calculations on the nominal carrying capacity and strict qualitative choice of the accessories and electrical and pneumatic components to make sure that our ramps can resist to harsh handling, knocking and overloading. They are very easy to operate and operator-friendly and each control panel comes with a detailed instructions manual.
KOPRON ramps can satisfy even the most diverse demands and come in a wide range of models:
- platform ramps
- telescopic ramps
- pantograph ramps
- bunk ramps
- counterbalanced drawbridge ramps (in Fe and Al)
- removable projecting ramps (in Fe and Al)
|
|
Our goods only lifts are used in the industry to provide transport solutions for load shuttling between different levels.
The regulations for these lifts are far less constraining than those for goods lifts allowed to carry personnel.
Our lifts are CE certified, they comply with Machine Directive 98/37/CE and norm project PR EN 81-31.
Our lifts can be delivered with a self-bearing frame. A shallow pit allows for the cabin floor fitting at ground level. Some lifts can be fitted on the ground, with access through a ramp.
A 3D drawing is supplied for the integration of the lift in your building.
We can of course supply all peripheral protections, servo-driven doors and gates, carry out the installation, trying out as well as the maintenance (maintenance contracts).
In order to meet most of your requirements, this range of products can operate with 3 different technologies: column hydraulics, scissor hydraulics and electric winch.
|
|
|
SITES produces several types of lift tables , to suit any industrial lifting requirement. PN3: single platform with loads capacity up to 30,000 Kg. and available in different sizes. Besides the standard platform there are special types with wheels and extractable drawbar, double length, with engine-powered traverse and cradle platform for spools or coils.
|
|
Mod. PL3:Doppia in lunghezza - Double lenght Lifting Table
Technical details series PL3 is realized in order to resolve the problems of balanced long cargo raising puts off center to you or furnish. Equipments of series: • Built-in or separated telephone exchange • Trap door of inspection on the pianale • Perimetrale chassis of emergency • Arms of emergency for the maintenance • Commandos to pulsantiera or pedal-key, present man • Feeding 400 V/50 Hz, Aux. 24 V.A.C. • Valve of block to the base of the oleodinamici cylinders • Rotary parts on self-lubricating bearings or ears-ring • Paint job standard: green - orange • Construction to norms CE, in compliance with EN 1570 Upon request the several requirements of the customer come realized particular applications second. Capacity (kg) Until 50.000 Length (milimeter) Until 16.000
|
|
Moreover there are other types with tilting platform up to 90° and with conveyor belt. Platform type PH3 has double height and a capacity load of up to 5,000 Kg.
Platform PT has triple height and a maximum capacity load of 2,000 Kg. SITES plans and builds platforms with
capacity load 50Kg to 100Tons.
|
|
|
Technical details series PL3 is realized in order to resolve the problems of balanced long cargo raising puts off center to you or furnish. Equipments of series: • Built-in or separated telephone exchange • Trap door of inspection on the pianale • Perimetrale chassis of emergency • Arms of emergency for the maintenance • Commandos to pulsantiera or pedal-key, present man • Feeding 400 V/50 Hz, Aux. 24 V.A.C. • Valve of block to the base of the oleodinamici cylinders • Rotary parts on self-lubricating bearings or ears-ring • Paint job standard: green - orange • Construction to norms CE, in compliance with EN 1570 Upon request the several requirements of the customer come realized particular applications second. Capacity (kg) Until 50.000 Length (milimeter) Until 16.000
|
|
The tables are manufactured in accordance with current rules for lifting tables and conformed to the EU machine directory and EN 1570.
All the metal parts are cleaned and treated against rust, covered with a lacquer polyurethane 2 components , giving a smooth and tight surface. The frame and the platform are painted in blue RAL 5015. The scissors are painted out of orange RAL 2003.
The tables are designed for a power supply with 3 x 415 V /50 Hz with earth and 0. All motors have 1400 rpm, which weans that the motor has a long life, and a low noise level. The voltage on all functions is 24 V.
|
|
|
|
