|
|
Lifting type NIVO PIK ref. YOU
Apparatus allowing the loading of a pallet the level of the ground per pallet truck or forklift truck and to have a movement of rise to keep an ergonomic position lasting the loading or unloading of the pallet
Charge with 250 to 2000 kg
Assembled control/descent by knob with maintained contact
Electrohydraulic rise
Électropiloté valve fixed on the cylinder
EC normalizes
Option:
dimensions of the plate or the forks
Revolving plate
Roller conveyer free or motorized
Tilting plate 30°
|
|
|
|
|
|
Autoquip Dock Scissors Lifts include several designs of powered loading dock equipment for moving wheeled or palletized loads onto or from delivery trucks of various heights onto or from your dock or grade level. Dock Scissors lifts can be surface mounted, pit mounted, or portable, and all meet the safety requirements of ANSI MH29.1.
Autoquip Truck Levelers are a superior dock solution to the traditional hinged dock-levelers or throw-over plates mounted onto the dock floor when faced with the challenge of loading & unloading trucks of varied heights. Hydraulic Truck Levelers are installed outdoors, in front of a dock or loading area, therefore not using valuable dock space. Truck Levelers also eliminate door security concerns and air loss is minimized in refrigerated or heated applications. Truck Leveler platforms can be provided with wheel guides, and are equipped with a provisional cut-out, to clear truck restraining devices, allowing the truck leveler platform to be located close to the face of the dock.
|
|
- Air cushion transporters of all sizes, up to a load of 1000 tons, with friction wheel drive and automatic , proportional air volume regulation of the air cushions and with the following options:
+ direct or remote controlled
+ wireless with infrared - or radio control unit
+ full automatic with induction loop or passive guiding tape
- Air cushion special equipment and devices (also for explosion-protected areas)
Here are some examples of our products based on air-cushion technology:
-Scissor lifts
|
|
LIFTING TABLE WITH BELLOW
Lifting table with manually swiveling plate and bellow the ease the handling of stacked items in one or two containers.
Main characteristics of the platform with bellow shown on the photo :
Lifting capacity : 2000 daN
Platform dimensions : 2,400 m x 1,600 m
Collapsed height : 0,440 m
Vertical stroke : 0,160 m + 0,500 to ease the maintenance
Mechanical drifting of the swiveling plate every 180°C.
Basic frame with two fork pockets to allow the entire unit to be lifted and moved by fork truck.
Feeding : tri-phased
Main options : motorized swiveling plate, manual or powered mobility on ground or on rails, galvanization, radio-control.
FOR ANY SPECIFIC REQUEST, CONSULT US.
Fields of application :
Industrial forge, mechanical engineering, cars and all kind of industries mass-producing items. Stacking and un-stacking parts to fill in or to empty containers....
|
|
These lifts use a column mounted to the freight hoist skeleton to attach and elevate the lifting platform
* Can be installed as either freestanding or fitted into an existing shaft
* Column lifts can be 1, 2 or 4 pallet capacity
* Comply with Australian Design Standards
* Available with multiple door configurations
* Unique Safetech control board provides maintenance and diagnostic feedback
|
|
Scissor lift tables from Sax Lift are of very high quality and all safety features are included. All Sax Lift scissor lift tables comply with EU requirements EN 1570 and are CE marked to confirm that the scissor lift tables are manufactured in accordance with applicable CE directives for scissor lift tables.
Scissor lift tables can be delivered either as a standard lift table or as a bespoke lift table which is made to order for a specific use.
There are 4 different types of scissor lift tables. Lifting tables can be Single scissor lift table, double vertical lift table, double horizontal lift table or super low lift table.
Double vertical lifting tables are used for heavy and very high lifts.
|
|
Standard and custom table solutions
up to 10 t load, up to 8 m lift
High positioning accuracy and repeatability over the entire lifting stroke
Extreme rigidity of the elevating platform, even where transverse loading occurs due to the design with 4 independent scissor arms and the provision of a scissor pivot bearing point at each corner of the upper frame.
Short assembly and maintenance times
Linear driving load and lifting speed
Optimised power requirement
Construction with spindle, belt or hydraulic drive
Durable welded structure
High service life, even under rough, continuous operation
Rapid interchange of all drive components
All bearings are lubricated for life
Easy to service design with exchangeable wear parts
Suspension points at the centre of gravity for crane transport
Maintenance supports for mechanically securing the upper frame
Numerous accessories and special designs round off the product range
|
|
APPLICATIONS
Personnel work platforms
Freight lifts between floor levels.
Mezzanine lifts,
Automated palletising systems
Positioning test apparatus or tools.
These tables are available up to 4000kg capacity and 4000mm of lift. Contact Safetech for applications outside this range.
|
|
GOOD-LIFT
Transfer of loads between a parking and an outside basement. The column lift unit is embedded in a metallic wiremesh cage self-supporting shaft and hot deep galvanized.
Door is equipped with an electro-mechanical interlock, control box and access ramp.
Main characteristics of the good -lift shown on the photo :
Lifting capacity : 2500 daN
Platform dimensions : 1,500 m x 1,500 m
Collapsed height : 0,210 m
Vertical stroke : 3,150 m
Main options : high speed lift, handrails, hot deep galvanization, platform and casing in stainless steel...
FOR ANY SPECIFIC REQUEST, CONSULT US.
Fields of application :
Changing of levels in a processing line. Storage of items on pallets or other equipment in warehouse... in any field of production and manufacturing.
|
|
Up to 50 t load, up to 8 m lift
Short assembly and maintenance times
Durable welded construction
High service life, even for rough, continuous operation
Rapid interchange of all drive components
The guided roller configuration ensures good guidance and a high lateral stability.
All bearings are lubricated for life, regreasable bearing version is also available on request
Easy to service design with exchangeable wear parts
Suspension points at the centre of gravity for crane transport
Maintenance supports for mechanically securing the upper frame
umerous accessories and special designs round off the product range
|
|
GRUSE-Eurolift are modern CAD constructions using a building block system and meet the newest european regulations. They are particularly robust , precise and long lasting but never the less offer good value for money. New equipment packages make it easy to choose the right table for your particular application and save money.
Examples of the many employment possibilities of the GRUSE-Eurolift:
- underframe constructed of angle-profile
- plattform as integral part of overframe
- differential cylinder
- easily changeable roller-, pivot-, scissor and cyclinder pins
- foot contact board
- inspection support
|
|
PH Series Mobile Hydraulic Lift and Assembly Tables
The basic PH Series table can be configured with many special features and options to meet specific requirements including cleanroom and other electrostatic-free operation, or as part of lean manufacturing assembly systems. Stainless steel models are available for sanitary or corrosive environments such as food and beverage, pharmaceutical and chemical processing.
Custom configurations, utilizing other Unidex products such as manipulators, workstations, etc. can be designed to create flexible work cells and more productive production areas. The PHL Series incorporates the lift, transport, and assembly features of the PH Series mobile tables with the mobility and positioning function of our PE Series mobile electric workstations.
|
|
Scissor lift tables from Sax Lift are of very high quality and all safety features are included. All Sax Lift scissor lift tables comply with EU requirements EN 1570 and are CE marked to confirm that the scissor lift tables are manufactured in accordance with applicable CE directives for scissor lift tables.
Scissor lift tables can be delivered either as a standard lift table or as a bespoke lift table which is made to order for a specific use.
|
|
LIFTING TABLE FOR WOOD INDUSTRY
Mobile lifting table on guiding rails for transversal travels. Equipped with a free rollers conveyor for the transfer of planks or furniture elements in wood industry.
Main characteristics of the lifting table for wood industry shown on the photo :
Lifting capacity : 1500 daN
Platform dimensions : 2,500 m x 0,900 m
Collapsed height : 0,250 m on rollers
Vertical stroke : 0,750 m
Rollers are blocked during the lifting of the load. Rollers are free again only when the table is in low position, down on its mechanical stops. Then horizontal transfer of loads to other stationary conveyors is possible.
Feeding : tri-phased
Main options : motorized rollers, powered travel on rails, galvanization, radio-controls...
FOR ANY SPECIFIC REQUEST, CONSULT US.
Fields of application :
Wood industry but also metal workshop and all kind of industries.
Stacking and un-stacking of planks, or others at a constant and ergonomic level for the operator.
|
|
Loading ramps - electro-hydraulic platforms
Designed to compensate any differences in height between the loading docks and the differing truck load platform heights, KOPRON ramps are planned and built in compliance with existing EEC regulations. KOPRON carries out thorough calculations on the nominal carrying capacity and strict qualitative choice of the accessories and electrical and pneumatic components to make sure that our ramps can resist to harsh handling, knocking and overloading. They are very easy to operate and operator-friendly and each control panel comes with a detailed instructions manual.
KOPRON ramps can satisfy even the most diverse demands and come in a wide range of models:
- platform ramps
- telescopic ramps
- pantograph ramps
- bunk ramps
- counterbalanced drawbridge ramps (in Fe and Al)
- removable projecting ramps (in Fe and Al)
|
|
Up to 10 t load, up to 3 m lift
High positioning, accuracy and repeatability over the entire lifting stroke
Short assembly and maintenance times
Linear driving load and lifting speed
Optimised power requirement
Construction with spindle, belt or hydraulic drive
Durable welded construction
High service life, even under rough, continuous operation
Rapid interchange of all drive components
The guided roller configuration ensures good guidance and a high lateral stability
All bearings are lubricated for life, regreasable bearing version is also available on request
Easy to service design with exchangeable wear parts
Suspension points at the centre of gravity for crane transport
Maintenance supports for mechanically securing the upper frame
Numerous accessories and special designs round off the product range
|
|
Hydraulic Platforms
PES model
Hydraulic platforms of this model are realised on customer specifics and used for particular jobs as lifting machines, structures or caissons in variable quotes according to weight and dimension as seen from above.
PED model
On specific customer request it is possible to realise double pantograph hydraulic platforms, used for particular jobs as lifting machines, structures or caissons in variable quotes according to weight and dimension as seen from above.
|
|
Scissor lift tables from Sax Lift are of very high quality and all safety features are included. All Sax Lift scissor lift tables comply with EU requirements EN 1570 and are CE marked to confirm that the scissor lift tables are manufactured in accordance with applicable CE directives for scissor lift tables.
Scissor lift tables can be delivered either as a standard lift table or as a bespoke lift table which is made to order for a specific use.
There are 4 different types of scissor lift tables. Lifting tables can be Single scissor lift table, double vertical lift table, double horizontal lift table or super low lift table.
|
|
Scissor lift tables from Sax Lift are of very high quality and all safety features are included. All Sax Lift scissor lift tables comply with EU requirements EN 1570 and are CE marked to confirm that the scissor lift tables are manufactured in accordance with applicable CE directives for scissor lift tables.
Scissor lift tables can be delivered either as a standard lift table or as a bespoke lift table which is made to order for a specific use.
There are 4 different types of scissor lift tables. Lifting tables can be Single scissor lift table, double vertical lift table, double horizontal lift table or super low lift table.
Double horizontal lifting tables are used for lifting long material.
|
|
Scissor lift tables from Sax Lift are of very high quality and all safety features are included. All Sax Lift scissor lift tables comply with EU requirements EN 1570 and are CE marked to confirm that the scissor lift tables are manufactured in accordance with applicable CE directives for scissor lift tables.
Scissor lift tables can be delivered either as a standard lift table or as a bespoke lift table which is made to order for a specific use.
|
|
LIFTING TABLE WITH TILTING PLATE
Lifting table with lateral plate tilting up to 45° to allow operators to handle items inside of containers or boxes at an ergonomic level.
Main characteristics of the platform with tilting plate shown on the photo :
Lifting capacity : 3000 daN
Platform dimensions : 1,600 m x 1,200 m
Collapsed height : 0,600 m
Vertical stroke : 0,900 m
Feeding : tri-phased
Main options : manual or powered mobility on ground or on rails, galvanization, radio-control...
FOR ANY SPEC IFIC REQUEST, CONSULT US.
Fields of application :
Industrial forge, mechanical engineering, cars and all kind of industries mass-producing items. Stacking and un-stacking parts to fill in or to empty containers....
|
|
Special made lift table with a tilting top for handling euro pallets
Scissor lift tables from Sax Lift are of very high quality and all safety features are included. All Sax Lift scissor lift tables comply with EU requirements EN 1570 and are CE marked to confirm that the scissor lift tables are manufactured in accordance with applicable CE directives for scissor lift tables.
Scissor lift tables can be delivered either as a standard lift table or as a bespoke lift table which is made to order for a specific use.
Our scissor lift tables can be equipped with extras such as turntable, bottom frame for truck handling, bottom frame with wheels, a tilting top platform and rollers.
|
|
Safetech can supply scissor lift tables with tilt decks that both elevate the load and present it to the operator. This option is available on most standard scissor tables and is ideal for use as a workstation where loading or unloading of componentry is required.
Tilting tops can be supplied in a variety of finishes including stainless steel and the deck can be modified to retain stillages, crates and boxes.
CAP.(kg): 1400
VERT. STROKE 915mm
MAX HEIGHT 1290 mm
PLATFORM SIZE 1300x1150 mm
ELEVATION TIME: 42 seconds
TILT 40 degrees
|
|
LIFTING TABLE WITH "U" SHAPE
Mobile lifting table on rails specially designed in accordance with the customer specifications. This table eases maintenance operations and specifically the laying and reassembling of bogies of tramway or railway rolling stock.
Main characteristics of the "U" shape platform shown on the photo :
Lifting capacity : 6000 daN
Platform dimensions : 2,500 m x 1,900 m
"U" dimensions : 1,700 m x 0,900 m
Collapsed height : 0,700 m
Vertical stroke : 0,950 m
Feeding : tri-phased
Main options : motorization on rails, batteries supply, radio-control.
FOR ANY SPECIFIC REQUEST, CONSULT US.
Fields of application :
Maintenance operations on railway equipment : metro, tramway or road vehicles. Changing of components, accessories, motors, compressors under different vehicles. The shape of the platform makes easy the access for the operator to the working point.
|
|
The tables are manufactured in accordance with current rules for lifting tables and conformed to the EU machine directory and EN 1570.
All the metal parts are cleaned and treated against rust, covered with a lacquer polyurethane 2 components , giving a smooth and tight surface. The frame and the platform are painted in blue RAL 5015. The scissors are painted out of orange RAL 2003.
The tables are designed for a power supply with 3 x 415 V /50 Hz with earth and 0. All motors have 1400 rpm, which weans that the motor has a long life, and a low noise level. The voltage on all functions is 24 V.
|
|
The Elevating Tables can be also in muellel of load i unloads in scissors system.
The platforms and tables of elevation facilitate and rentabiltzan the work. Standard models and to size.
Different lifting capacities and lifting heights.
Fixed and movable models:
- Table cart with wheels
- Table with wheels in the chassis inferior
- Table with revolving circular plate
- Table with transfering motortzada in 2 or 4 senses
|
|
|
|
|
|
SELF-PROPELLED LIFTING TABLE
Mobile self-propelled lifting table on the ground to facilitate the changing of motors, compressors, air-conditioning and other components from rail cars.
Powered travels by a motor unit - from an electric fork-lift truck with batteries.
An operator drives the mobile self-propelled lifting table on the ground.
Main characteristics of self-propelled platform shown on the photo :
Lifting capacity : 2500 daN
Platform dimensions : 1,600 m x 1,400 m equipped with a plate on rollers to handle easily loads
Collapsed height : 0,400 m
Vertical stroke : 1,000 m
Main options : a double swivelling platform, a tilting platform, transversal and longitudinal sliding, a conveyor with free or motorized rollers, a "V" shape platform, galvanization,....
FOR ANY SPECIFIC REQUEST, CONSULT US.
Fields of application :
Manufacturing or maintenance of railway cars or vehicles. For any kind of activities requiring transport, maintenance, mounting and des-mounting of heavy parts......
|
|
THT transportable lift table
- assured function! Clear design!
Originally developped for the transport of conference tables this transport table can be used for a lot of other tasks. The principle is just to push it below the cargo to move, to lift it by the handwheel and then to manoeuvre and position it assuredly and comfortably.
This table is endued with a manual lift of 100mm and solid design-rolls. The load capacity is up to 100 kg.
Other than conventional lift tables in logistics, it excels in an attractive optics and simple handling. The rotation is changed over the arbor into the lift by the covered planetary gear. Thus it offers perfect operator protection.
Invisible technology clearly to see!
|
|
LIFTING TABLE WITH SWIVELLING PLATE
Lifting table with guides, locking and motorized swiveling plate up to 90°C.
Main characteristics of the platform with swivelling plate shown on the photo :
Lifting capacity : 3200 daN
Platform dimensions : 5,500 m x 2,600 m
Collapsed height : 1,150 m
Vertical stroke : 3,000 m
Feeding : tri-phased
Main options : high lifting speed, reinforced edges, galvanization, radio-controls
FOR ANY SPECIFIC REQUEST, CONSULT US.
Fields of application :
Vertical transfer and positioning of heavy and bulky loads in all kind of industries and activities as storage warehouse, large-scale distribution, agriculture....
|
|
|
|
|
|
The mechanical flat belt lift table is equipped with independent safety belts which travel with the table during standard lifting operation without being subject to stress. This solution with patented mechanics fully conforms to the safety regulation in accordance with DIN EN 1570. Maintenance has been minimised by the use of wear-free parts and the operating life of the lift table considerably increased. The durability of the flat belts is guaranteed by the rubber coating of the steel cord tension members which optimally protects them from external influences. Neither retensioning nor lubrication is necessary.
Moreover, BELT-LINE impresses with its harmonious, uniform motion paired with high lifting speed and precise positioning accuracy. Particular emphasis was placed on developing and excellent load change behaviour so that the behaviour of the BELT-LINE resilience path is surpassed only by LAWECO’s own push-pull chain lift tables. As noise protection is becoming increasingly important and has been required by EU directive for a long time, the exemplary smooth running characteristics are another point in favour of BELT-LINE. The flat belt mechanics with coated tension members have a clear advantage with regard to noise over other systems, even hydraulic lift tables.
|
|
|
|
