|
|
* retractable clamping rod, clamping jaw escapes from die
* horizontal clamping surfaces
* clamping force applies perpendicularly to clamping rod (no radial load)
* includes mechanical safety lock, so the die cannot drop from ram in case of pressure fail
* escaping rod prevents any jamming, even in the toughest applications, such as forging
|
|
* clamp is fixed or slides in T-slot of press
* variable span up to 15 mm
* can be used on both bolster and ram
|
|
SLOTTED-HEEL CLAMP STRAPS
TAPPED-HEEL CLAMP STRAPS
SWIVEL-HEEL CLAMP STRAPS
DOUBLE-END CLAMP STRAPS
DRILL-SPOT-HEEL CLAMP STRAPS
STEP BLOCKS & CLAMPS
Forged Adjustable Clamps
Aluminum Adjustable Clamps
Forged U Clamps
|
|
Mechanical clamping elements:
- high clamping forces
- high operational safety
- simple manual operation
- compact, flexible design
|
|
Block Clamps
Jergens StayLock Block Clamps are multi-purpose utility clamps designed for many versatile applications. Block Clamps may be mounted for either vertical or horizontal clamping. They may be used with strap clamps or similar workholding devices for maximum adaptability (see illustration below). The Block Clamp plunger has a 1/4 - 28 thread on the I.D. for use with various contact points.
Retractable Clamps / Proximity Switch
Jergens StayLock Retractable Clamps are designed to allow quick change of molds in injection molding machines and die casting machines. The locking arm, which retracts into the clamp body for easy loading and unloading of a mold, is adaptable to clamp many standard mold slots. The Retractable Clamp is double acting and includes alternate clamp and release ports for easier hydraulic plumbing set-up. A Proximity Switch, which indicates the Retractable Clamp is in the extended or retracted position, is also available (see below).
|
|
Series PA Clamps are ideal for automated part holding, and are available in one working day from receipt of order. Five sizes and left and right rotations are available for a wide variety of tasks.
Advantages: Simple design, compact size, low weight, long life, high clamp force, available in five sizes.
|
|
High Positioning Accuracy
Taper ring expands to closely contact the hole of workpiece to assure the high repeatability.
|
|
|
Model TME is a retractable lever type clamp and ensures sufficient mold holding force by a heavy duty spring even at the oil pressure failure.
|
|
* clamp is fixed or slides in T-slot of press
* variable span up to 15 mm
* adjustable or fixed (type BTSA)
* custom versions up to 400 kN
* replaces conventional bolt-and-nut clamping
|
|
REMARK
1 : Mounting surface finish should be no rougher than Rz 6.3 (ISO 4287 :1997). 2 : Be sure to use O-ring included at all times.
3 : Tightening torque of body thread should be as per the table below.
4 : When mounting an attachment, be sure to hold the wrench width at the tip by spanner, etc.to prevent the piston from rotating before
tightening the bolt. Do not attempt to tighten it with a hydraulic-powered resistance against rotation
|
|
The clamp arm rotates 90° as it extends away from the work piece providing clearance and access for unload/ load operations. Double acting operation and standard magnetic piston offer positive cycles, durability and work piece detection features. Extruded aluminum body mounts directly and rigidly to equipment surfaces in a minimum of space.
Operation cycle:
1) Clamp arm extends (straight line) as it releases work piece from clamp loads.
2) Arm rotates 90° to full extend position.
3) When retracting, clamp arm swings 90°.
Model Code R = clockwise rotation, Model Code L = counterclockwise rotation.
4) With clamp arm in position over the work piece, it follows a straight line path to apply clamping force.
|
|
A variety of workpieces can be
clamped by replacing the clamp
arm. Standard and extended
clamp arms are available as
options.
|
|
Compact Pneumatic twist cylinders are linear motion compact cylinders with an internal cam that provides
90 deg swing motion.
Twist cylinders are ideal swing clamps for automated and semi automated assembly and work holding found in circuit board assemblies, medical devices, robotic cells, component assembly and other applications. Because of their compact size and versatile mounting, they also make unique conveyor stops, diverters and escapements.
|
|
Snap-Trap clamps can be fitted in seconds, reducing installation time by up to 80% compared with some alternative systems which require the assembly of up to 12 parts. Already widely used in the Norwegian sector, the clamps are highly resistant to corrosion and comply with the NORSOK offshore standard. Just two sizes of Snap-Trap handle the spectrum of metric and imperial instrumentation tubing diameters up to 25mm/1inch, avoiding the specification, purchasing, stocking and day-to-day handling overheads associated with existing systems - which can require anything up to 24 parts to provide the same solution.
A new dedicated fitting tool is now available for easily opening and closing the clamp's ratchet-based clamping mechanism - improving ergonomics compared with the option of using a screwdriver to apply the required pressure.
Made from stainless steel, Snap-Trap is a square component with a U-shaped body and a hinged top arm. As the arm closes, it progressively grips the tubing using a ratchet-style mechanism. The flexibility of this action allows each clamp to accommodate a wide range of tube sizes. The smaller 27mm-square Snap-Trap accepts 6 to 12mm or 1/4 to 1/2inch tube sizes; the larger 47mm-square clamp accepts tubes of 12 to 25mm or 1/2 to 1inch.
|
|
7011-5 - Hydraulic Power Clamp
The power clamps (double action) are used where a high clamping force is needed combined with small clamp dimensions. The cylinder body can be turned 90� in relation to the clamp.
1. max. clamping force 1250 daN (2810 ib)
2. max. operating pressure 250 bar (3625 psi)
00863DE/100986DE - Hydraulic Edge Clamp
StrongHold edge clamps perform three functions: locating the workpiece, clamping horizontally against secondary locators, and clamping vertically against the primary locating surface.
1. Conventional or manifold mount versions
2. 15 degree clamping angle
3. Single acting
4. 2000 lbs. clamping force
|
|
Low-profile clamps come in two basic models, one with a single-wedge and the other with a double-wedge construction. In addition, we offer a line of machinable jaw models for workpieces of irregular shape and a special model for casting and wire EDM applications
Standard models come with a hardness of 48-52 HRC and the jaws are serrated or smooth, depending on model. Both the wedge and the jaws are made of tool steel and are through hardened. Fastening operation involving one bolt (M5-16) ensures quick set up times.
|
|
035 - SELECT Pneumatic Swing/Pull Clamp
StrongHold SELECT pneumatic swing/pull clamps are designed for applications not requiring hydraulic power. They are a rugged and simple design suitable for harsher applications.
1. Double acting in threaded body or lower flange mount styles
2. Range of sizes for maximum clamping forces from 50 to 430 lbs.
3. Swing motions in right, left or straight guided pull
4. Avaiable in 0, 45, 60 or 90 degrees of swing
|
|
STANDARD HTC DESIGN
Automatically Adjusting
LOW ARM TC DESIGN
Extra-Wide Opening
|
|
HORIZONTAL-HANDLE TOGGLE CLAMPS
VERTICAL-HANDLE TOGGLE CLAMPS
PUSH/PULL TOGGLE CLAMPS
Toggle Edge Clamps
LATCH-ACTION TOGGLE CLAMPS
TOGGLE PLIERS
AIR-POWERED CLAMPS
|
|
Ganter from Furtwangen offers a wide range of Toggle clamps.
Vertical clamps, horizontal clamps, push-pull clamps, hook clamps, pneumatically operated clamps are an extract of a wide product range.
|
|
Vertical
Hold Down Vertical 1000lbs max
This heavy duty clamp is available with solid bar and U-Bar construction. It accepts all 1/2-13 diameter spindles. The solid bar model is supplied with a 70901 bolt retainer. The U-Bar model is supplied with 70902 flanged washers. Spindle assembly 70903 must be ordered separately for both models.
Holding capacity: 1000 lbs. max.
Weight: 2 lbs., 7 oz.
Handle moves 67°, bar 120°
Solid Bar: 7/8" height, 3/8" wide
U-Bar: 7/8" height, 17/32" wide
Horizontal spindle adjustment: 3 1/8"
Spindle Thread: 1/2-13
Horizontal
Hold Down Horizontal 750lbs max
This horizontal clamp is available with U-Bar construction in a flanged or straight base. Supplied with a 70915 neoprene tipped spindle assembly. Both models supplied with a blue vinyl handle.
Holding capacity: 750 lbs. max.
Weight: 1 lb., 8 oz.
Handle moves 55°, bar 90°
U-Bar: 3/4" height, 7/16" wide
Horizontal spindle adjustment: 2 1/4"
Spindle Thread: 3/8-16
|
|
|
WDS stock a huge range of Toggle Clamps in both Mild and Stainless Steel. Vertical, Horizontal and High Speed options are catered for in the range that is covered within the Standard Parts catalogue. For further details or a copy of any of the catalogues available from WDS visit our web site or call + 44 (0)113 290 9852.
|
|
The grasshoppers EMILE MAURIN: New ergonomic handle Bi-matter!!
A very broad range steel and stainless!
The new grasshoppers EMILE MAURIN are provided with an ergonomic handle Bi-matter for a better comfort of use. The non-skid flexible part is in contact with the hand and the harder part in contact with the grasshopper.
These grasshoppers have also 2 other technical advantages: an articulation made safe with an integrated thrust and an arm out of U slightly widened to avoid the loss of the screw of plating.
The range of grasshoppers EMILE MAURIN is composed of:
thorough grasshoppers: with horizontal base plate, vertical or side; with full arm;
reinforced; with handle of safety, anti-reflecting
drawn grasshoppers: with horizontal base plate, vertical or side; with full arm;
with handle of safety, anti-reflecting
grasshoppers with sliding tube
grasshoppers with hook
pneumatic grasshoppers
And of course of many models are proposed out of stainless for specific uses in industries such as chemistry and agro-alimentary.
|
|
CLAMPMASTER SERIES
Clampmaster series of tools feature power packs ranging from SP-01P to
SP-003. These, combined with the special jaws can manipulate a wide variety of hose clamps (1/4" up to 3").
Our SM-300 and SM-350 are standard tools and fill 80% of all hose clamp needs.
A complete model listing and specially engineered tools are available from the factory.
|
|
8021 - Pneumatic Hold Down Clamp - Enclosed
Patented enclosed linkage makes clamp ideal for dirty environments such as welding and machining.
1. 390 lb. Capacity
2. Double-acting pneumatic system required to operate
3. Available with magnetic ring for position sensing as an option. Switches are also available
4. Can be equipped with Viton seals for high temperature applications
035 - SELECT Pneumatic Swing/Pull Clamp
StrongHold SELECT pneumatic swing/pull clamps are designed for applications not requiring hydraulic power. They are a rugged and simple design suitable for harsher applications.
1. Double acting in threaded body or lower flange mount styles
2. Range of sizes for maximum clamping forces from 50 to 430 lbs.
3. Swing motions in right, left or straight guided pull
4. Avaiable in 0, 45, 60 or 90 degrees of swing
|
|
225 - Horizontal Hold-Down Toggle Locking Clamp
Minimum overhead clearance is required for this low profile clamp
1. 500 lb. capacity
2. Clamp supplied with neoprene spindle
3. Stainless steel and straight base models available
4. DE-STA-CO® Toggle Lock Plus versions available
235 - Horizontal Hold-Down Toggle Locking Clamp
Minimum overhead clearance is required for this low profile clamp
1. 750 lb. capacity
2. Clamp supplied with neoprene spindle
3. Stainless steel and straight base models available
4. DE-STA-CO® Toggle Lock Plus versions available
|
|
The high performance toggle action clamps are used to clamp mid to large size vehicle parts in Body-in-White operations. The oblong design of the cylinder and the narrow clamp head allow optimal access for weld guns and the fully enclosed mechanics provide a shield from welding slag.
The units are designed for over 3 Million work cycles.
Optionally available in steel or aluminum design.
Integrated inductive position sensors mounted in a cartridge (Patented)
|
|
Horizontal and vertical zinc-plated steel clamps for light to medium duty applications.
High quality surface protection treatment, optionally available in stainless or other high grade steels for moist or underwater applications,
ergonomic pressed-on plastic handle,
robust fully riveted,
stainless steel and hardened bearings,
two part clamp arm for quick mounting and removal of the clamp pad,
internal stop for defined arm clamping position:
The Clamping Tools for Professionals!
|
|
|
|
