|
|
Wide range of filters:
Radio frequency filters (CRFI).
I/O Inverters inductances.
Chockes.
Complete range of sinusoidal filters FCL.
|
|
EMI Filters
-Footprint and stardard for LS inverters
-Standard for general use from 3 to 2.500A
Inductances and harmonic filters
-Inductances for inverters from 4 to 600A
-Harmonic filters LCL types from 4 to 180A
-Inverters output chokes
-dv/dt filters from 4 to 400A
|
|
|
Spectrum Control EMI filtered power products prevent unwanted interference from entering your system, as well as eliminate emissions that can contaminate the AC power grid. Our standard and custom products are available in a wide range of AC/DC current and voltage ratings to address EMI filtering for high current applications. All Spectrum power products are designed to meet global EMC emissions regulations.
|
|
|
All the advantages of IEC connector, EMI filter, fuses, switch and voltage selector combined in a powerful compact all-in-one solution. Ideal for computers, monitors and office equipment like printers and copy machines.
|
|
|
Spectrum Control's low pass product offers the largest selection of resin and hermetically sealed filters. Resin sealed filters offer a wide variety of packages to accommodate your size and mounting requirements. Miniature solder-in (low profile) filters are constructed with a discoidal and are glass sealed on one end to provide a compact, low cost Pi or C filter that can be soldered into a bulkhead. High current/high voltage bolt-in filters featuring current ratings up to 100 ADC or rated voltages up to 1250 VDC. Glass seal filters are used where a rugged, hermetically sealed filter is required. They consist of discoidal capacitors with or without ferrite sleeves or wound inductors in 1/4-28 or 5/16-24 threaded cases. Through the use of discoidal capacitors and wound inductors, high capacitance and inductance values can be achieved. Hermetically sealed filters provide very high EMI filtering performance.
|
|
|
The Miniature Solder-in Filters and Spec Mini-Press 9000 Series provide various microwave and RF applications such as attenuators and oscillators, and the Spec Spin Filters are ideal microwave applications for commercial and hi-reliability applications.
|
|
|
Very compact EMI suppression components can directly be mounted on printed circuit boards of low-power office, medical, telecom and IT equipment, DC/DC converters and power supplies etc. Ideal low cost solution for manufacturers who have planned for EMC compliance throughout the equipment design process already.
|
|
Single-Phase EMI/EMC Filter
Single-phase filters for chassis or DIN-rail mounting are key for EMC compliance of higher power office equipment and low to medium power industrial applications. A broad selection of electrical and mechanical features allows a specific choice and deployment for countless applications.
|
|
|
Our complete family of surface mount EMI filters including surface mount inductors, low pass filters, high frequency filters and power filters is designed to offer high performance EMI filtering with a minimal PCB footprint. These filters are available in feed-thru and Pi circuit configurations. Tape and reel packaging is available to enable pick and place equipment installation of this product, saving time and cost compared to thru-hole filters. Spectrum Control surface mount EMI filters are ideal for a wide range of PCB applications, including automotive electronics, digital AV equipment, computers, peripherals, telecommunications, switching power supplies and high current buss lines.
|
|
Three-phase and neutral line filters are a compact solution for the interference suppression on the mains input of cabinets and control units of equipment, ranging from industrial applications like machine tools to sensitive medical installations. These typically involve separate and often
insufficiently filtered frequency inverters and SMPS, causing current imbalance and significant interference problems. As individual elements they may be interference-suppressed already. The conjunction of several switching components in the same cabinet and a non-EMC conscious cabling will rise the demand for an additional EMC filter on the mains input of the whole installation. Many times this is the only way to get the CE mark for the cabinet in accordance with the EMC directive.
|
|
|
EMC filter solutions for industrial applications like motor drives and machine tools. Furthermore, these types of filters are also suitable for mainframe computer systems, large uninterruptible power supplies, medical equipment, wind turbine power stations and a vast array of other threephase power electronics.
|
|
Virtually eliminates the problem of conducted EMI in data line applications
Provide common- and differential-mode noise attenuation,Reduce noise by a factor of 32 from 15 MHz to 300 MHz,High current (500 mA) versions available;300 Vrms isolation;Excellent environmental stability and low cost
Available in 10 and 8 line versions;Consider our PDLF series for 4, 3 and 2 line applications;RoHS-compliant. 260°C compatible. Tin-silver-copper over silver-platinum-glass frit terminations.Samples of all values plus samples of PDLF and through-hole versions are available in Coilcraft Designer's Kit D303
|
|
Capacitors for radio-interference suppression
classes: X1, X2, Y1, Y2
Filters for radio-interference suppression
classes: X1Y2, X2Y2
|
|
MTE Corporation type "RF" filters offer an economical solution to many facility interference problems caused by the high frequency emissions of adjustable speed motor drives and inverters. Type "RF" filters can prevent drives and inverters from interfering with other sensitive electronic loads by reducing both common mode and differential mode noise emissions.
Typical drive and inverter applications include:
AC Motor Drives
DC Motor Drives
Uninterruptible Power Supplies
Active Harmonic Filters
Battery Chargers / Electronic Welders
|
|
[RoHS Compliant]
Wide application to various field such as industrial apparatus,telecommunication equipment and medical systems.
|
|
|
LCR manufactures a complete range of high quality standard and customized filters for many diverse applications. Our products are used in all appliances including portable tools, vacuum cleaners, blenders, mixers, white goods, pumps, microwave ovens and power supplies. Our EMI Filters (RFI Filters, EMC Filters) bring appliance products into compliance with all National (FCC) and International (CE,VDE, etc.) EMC regulations.
|
|
Signal Filtering
ON Semiconductor provides EMI and RFI filters, for audio and data signals, that deliver superior performance in industry-preferred DFN packages.
|
|
Snap-On EMI Ferrite Cores for Broad Band EMI Solutions
Steward, a unit of Laird Technologies, has designed three sleek attractive high-performance split Snap-On ferrite cable cores in plastic cases. These devices were designed with exterior consumer product cables in mind and have the look of a plastic overmolded ferrite core with the convenience and ease of a split Snap-On. Impedance (Z) up to 572 Ă at 100 MHz and 688 Ă at 300 MHz.
With many applications that require high impedance, just snapping these cores on the cable with one pass through will provide enough EMI attenuation to do the job, eliminating the need for multiple turn configurations.
|
|
FIAM - Filter Input Attenuator Module
A DC input, front-end module providing transient protection, inrush current limiting and EMI filtering. The FIAM enables designers using Vicor Maxi, Mini, and Micro 48 Vin DC-DC converters to meet the transient immunity and EMI requirements of Telcordia, FCC, ETSI and European Norms.
|
|
|
LCR's Single Phase Industrial EMI filters (RFI filters, EMC filters) attenuate electrical noise generated from industrial, telecommunication, commercial, military and medical electrical and electronic equipment. These EMI filters attenuate mains-borne electromagnetic interference from 100 kHz upwards to very high frequencies.
|
|
Features:
· 12 page catalogue
· ac & dc ranges
· Standard current ranges 1A - 15A
· High current ranges 6A - 100A single & three phase
· Special range for switched mode power supplies which have low noise source impedance
· All filters incorporate feedthrough capacitors to give high frequency performance to beyond 1GHz
· Use to control high frequency emission and susceptibility
· Bulkhead or chassis mounting
· European EMC directive applications to meet high frequency requirements
· Custom design capability
|
|
|
RADIUS POWER offers one of the most extensive range of standard and custom EMI filters and EMC filters. From industrial to medical, RP can provide the right filter solution for all applications requiring EMI filters, AC filters, DC filters, single phase filters, three phase filters, IEC inlet filters and PEM or power entry module filters. All standard filters are safety approved to the applicable UL, CSA and CE standards which represent one of the most extensive product crosses to major competitors such as Corcom, Schaffner and Delta.
|
|
|
LCR Electronics designs, develops and manufacturers a complete range of Aerospace / Military EMI Filters (RFI Filters, EMC Filters) to help its customers meet MIL-STD-461 (MIL-461), RTCA-DO160 and others EMC requirements. These include standard off-the-shelf EMI filters as well as project-specific, specification driven and build-to-print Military EMI filters and suppression components.
|
|
Features:
· Custom filters for motors, generators, power supplies, signal lines, engine management,
radar, TEMPEST & EMP applications
· MPE custom filters are already widely used in vehicles, ships, submarines, aircraft,
missiles, shelters, and communications buildings
· Tailored performance, packaging, mounting, and terminations
· Cost - effective
· Rapid prototyping service
· Fully resin encapsulated filters to meet severe environmental conditions
· Can be supplied with cables, military connectors, screened leads etc to simplify installation
|
|
|
LCR's 3 Phase EMI filters (RFI filters, EMC filters) are typically used in Power Electronic products. These EMI filters attenuate mains-borne EMI generated back into the power line. LCR's 3 phase EMI filters also protect sensitive electronics and make them less susceptible to surges, Electrostatic Discharge (ESD) and other harmful voltage and current surges. Typical applications for these EMI filters (RFI filters, EMC filters) are in three-phase industrial drives, controllers, frequency converters and industrial machine tools.
|
|
Delta Configuration
- Single Stage, High Performance: 25A to 500A
- Single Stage. Compact, Low Height: 6A to 60A
- Single Stage, Ultra Compact: 6A to 20A
- Dual Stage, High Performance: 15A to 300A
- Dual Stage, High Performance: 15A to 300A
- Dual Stage, Bookshelf Design: 7A to 250A
- Single Stage, Bookshelf Design: 7A to 180A
- Single Stage, Compact: 20A to 100A
- Single Stage, Compact: 20A to 60A
WYE Configuration
- Single Stage + N, High Performance: 15A to 300A
- Single Stage + N, Compact, Low Height: 6A to 40A
- Single Stage + N, Ultra Compact: 6A to 20A
- Single Stage + N, Ultra Compact, High Perf: 6A to 20A
- Single Stage + N, Compact: 8A to 160A
- Dual Stage + N, High Performance: 15A to 300A
- Dual Stage + N, High Performance: 15A to 300A
|
|
Compact, space-saving configurations offering high power performance
Superior isolation achieved by utilizing Captor feedthru capacitors
Demanding Tempest Requirements? STOP YOUR SEARCH and contact Captor!
|
|
- Compact state of the art filter concept
- Light weight plastic enclosure design
- Minimized filter leakage current
- Hinged safety covers
- Revolutionary embedded filter terminals
- Chassis (FN 3025) or DIN-rail (FN 3026) mounting option
- Selectable performance level
- Environmental friendly design without potting compound
|
|
|
|
