|
|
|
Carbon-plated conductive fabric can solve some appearance problems such as stains, spots, etc. It also makes the products more resistant to oxidation. Accordingly, the long-term service life of the products is guaranteed.
|
|
Fabric over foam gaskets are made of a resilient foam core, bonded over with conductive fabric. More than 70 different profiles offer unlimited selection for any application. Some profiles contain rigid inserts. Metallized conductive fabric bonded to resilient core (available in urethane foam, neoprene sponge) offers a good shielding efficiency and works as a seal to block air, light and dust.
- UL94-V0 certified
- RoHS compliant
|
|
|
Trademark EMI gasket is a registered trademark of our company ,It's manufactured by PU foam wrapped with conductive fabric which been exported from Japan high technology enterprise ,can offer high shielding effective with low resistivity.
|
|
When your designs require EMI gaskets that exhibit high attenuation and low closure force, Metex Conductive Fabric gaskets are an ideal choice.
By combining a soft core with conductive fabrics, we have created a gasket that will provide >65 dB attenuation at 1 GHz, and compression loads under 4 lbs. per inch at 25% deflection. Low compression forces allow for lighter, less expensive enclosure designs.
Conductive Fabric gaskets are the ideal gaskets to use with conductive coatings that can be scratched or damaged by other more abrasive gasket materials. The conductive fabrics available include abrasion-resistant copper and nickel.
|
|
Profile and Input/Output (I/O) EMI shielding gaskets are available in UL94 V0 and HB flame retardant material. Laird Technologies specializes in quick turnaround of custom shapes and sizes of EMI shielding gaskets. Profiles can be cut to specified lengths, kiss-cut release liner or mitered to form frame configurations.
- RoHS compliant
- Shielding effectiveness of >100dB across a wide spectrum of frequencies (MIL-STD 285 mod.).
- Extremely low compression forces allow for use of lighter materials.
- Low Surface Resistively of <0.07 ohms/square provides improved conductivity (ASTM F390).
- Wide range of flame retardant gaskets available (UL recognized per UL94 V0 or UL94 HB.
- Abrasion resistant materials show virtually no degradation in shielding performance after 1,000,000 cycles (ASTM D3886).
- Service temperatures from -40 to 70° C (-40 - 158°F)
- Available with a variety of pressure sensitive adhesive (PSA) tapes.
|
|
|
Characteristics:Gold has excellent conductive performance and can guarantee the electrochemical compatibility and stability among base material in a very large range.can offering high shielding effective with low resistivity .fit for special environments.
|
|
Goodyear EP's Solar-Shield heat belt is offered with Polyester/Polyester, Polyester/Nylon and Fiberglass fabric reinforcements. It offers high performance in extreme hot material applications. The fiberglass option offers the highest degree of burn-through resistance of any current available fabric reinforcement.
Heat-resistant cover resists cracking and hardening
Solar-Shield belting performs over the long run, retaining its flexibility despite punishing conditions and loads. Less cracking and hardening translates into longer life and reduced replacement costs.
High-temperature resistance to tearing and abrasion
Load after load, Solar-Shield stands up to prolonged exposure. This reduced maintenance and downtime helps lower overall operating costs.
Innovative Solar-Shield cover compound
Solar-Shield belting provides superior performance under extreme heat conditions. The Solar-Shield (EPDM) compound retains its heat-resistant qualities after prolonged exposure to 400°F hot loads.
Synthetic carcass construction
Solar-Shield's synthetic carcass provides great dimensional stability and strength at high temperatures and operating tensions up to 1200 PIW.
Solar-Shield carcass with fiberglass reinforcement
Fiberglass reinforcement throughout all plies of the carcass provides maximum protection when temperatures are not constant. The carcass stands up to "hot shots," resisting burn-through up to 1000°F.
Applications:
Steel Mills
Cement Clinker
Coke Plants
Taconite Pellets
|
|
Goodyear EP's Plylon is a poly/nylon reinforced conveyor belt that provides an economical alternative to Plylon Plus® in less-demanding applications.
Excellent fastener holding retention
Plylon belt constructions offer superior mechanical fastener holding. Heavy polyester/nylon cords positioned for maximum strength resist fastener pull-out even in abusive conditions.
Reduced stretch
The combination of fabric design and dip process provides less elastic and permanent elongation on all specifications. This minimizes take-up concerns and reduces the number of splices at break-in. Contact your local Goodyear representative to calculate permanent and elastic elongation requirements for your specific systems.
High-strength crimped cords absorb impact
By straightening on impact, the crimped warp cords enable the fabric to absorb impact loads and resist tearing. Plylon belting maintains the integrity of mechanical or vulcanized splices under demanding conditions.
Polyester/nylon fabric carcass (110 lbs. per ply)
Plylon belting is designed to handle sand, gravel and small stone applications. The polyester-nylon fabric reinforcement provides greater breaking strength, impact and tear resistance than competitive brands.
Applications:
Stacker Conveyors
Trash and Recycling Plants
Ready Mix
Block Plants
Wash Plant
Load Out
Radial Stackers
|
|
It’s not just tough. It's Triple-Warp Tough! Goodyear EP's exclusive, patented, polyester x nylon Triple-Warp fabric weave makes Coal Quest the belt of choice for abusive underground applications.
Designed for Down-under Durability
This unique belt construction features a Goodyear’s patented* Triple-Warp center ply surrounded by a pair of abuse-resistant and flexible outer plies. This provides superior mechanical fastener holding strength, unbeatable vulcanized splice capabilities, a high degree of flexibility and great impact, tear and rip resistance.
Impact Resistance
Goodyear underground belts come well prepared to withstand the worst. That’s because loading impact damage, a major cause of belt failure is already assessed and predicted at our Technical Center Laboratory. During the design phase, Goodyear engineers utilize an enhanced Dynamic Impact Tester to accurately simulate loading impact force and its effects on belting. This information contributes to the design of our Triple-Warp fabric weave.
Transverse Tear Resistance
Due to the extremely high transverse tear strength of Coal Quest belts, edge tear occurrences are minimized and contained.
Rip Resistance
The Triple-Warp fabric design of Coal Quest belting helps dislodge and expel foreign objects and contain rips to a small area.
Applications:
Mainline Belts
Panel Belts
Slope Belts
to name a few.
|
|
| ... products without technical information |
| |
System solutions for reliable connections in plant engineering and construction.
Corrosive fluids, large movements, vibrations and a wide variety of pressure levels as well as extreme temperatures: The one who is responsible for plant engineering or equipment design must take many factors into consideration.
Customised solutions are essential in industrial engineering because of individual design criteria. High quality expansion joints supplied by Frenzelit are as practical as they are cost effective.
With having over four decades of experience in the design and manufacture of both expansion joints and the textiles that comprise our products.
You as our customer can be assured that we have not only the technical knowledge but also the experience to service your specific industry. This includes application design, proper material selection and industry-accepted standards.
|
|
In an isolated duct or in a duct system, both the circulating fluid temperature and pressure changes and the atmospheric changes may produce stresses that could quickly destroy the system if there were no elements that provided flexibility to the whole unit.
The solution to these problems is provided by the installation of Expansion Joints. SAFETECH has the means and knowledge to calculate those stresses and offer the most adequate solution and product for every case. The development of new solutions and products is the response given by SAFETECH to the increasing demand of energetic and environment efficiency.
This technical capability is the base of SAFETECH, an experienced team of technicians and engineers with many years of experience, allow us to cover all necessities that our clients might have in the Expansion Joints field. SAFETECH may offer any standard or special solution. Our program covers all three types of Expansion Joints: Fabric, Metal and Rubber, al! used as flexible elements to absorb vibrations, misalignments, thermal expansions, or any other movement caused by internal or external vibrations.
Safetech designs expansion joints by means of searching for the best technical and economical solution for different industrial sectors.
Power Plants
Petrochemicallndustry
Cogeneration Plants
Marine Industry
Cement Industry
Steel and Cast Iron Plants
Pulp and Paper Industry
The above figure represents a power plant.
The blue elements indicate the typical locations for the expansion joints.
|
|
STENFLEX fabric expansion joints are preferred in plant and equipment engineering involving gaseous media at high temperatures, e.g. hot air or flue gas. They are resistant to acid or alkaline gases and remain stable under high or low pressure.
STENFLEX fabric expansion joints are quality products used in components, plants, machinery and piping systems.
Their functions include:
- vibration and noise damping
- motion and expansion compensation
- compensation for imprecise assembly
|
|
Conductive fabric shielding tape offers excellent conductivity, strong adhesion and durability in a thin, lightweight and flexible shielding design.
Constructed of nickel over copper metalized fabric with acrylic conductive adhesive, this high-quality tape design provides excellent shielding effectiveness while offering superior abrasion and corrosion resistance.
Tapes are an economical shielding solution for a wide variety of commercial applications, and roll forms provide a low impedance connection between a braided cable shield and the metal connector backshell in molded cables. An effective shielded assembly can be achieved without soldering tape to the braid or backshell.
|
|
|
Silver has the highest heat exchange performance among all the metals,it could discharge body heat quickly?If the heat exchange rate of silver is 100,Iron is 11.6,gold is 8.2. The outstanding heat exchange performance could discharge the heat quickly and prevent human disease.
|
|
* All cloth tapes are strong and offer good conformability
* All cloth tapes from Advance Tapes have non-corrosive adhesives keeping any reaction with the surface applied down to a minimum
* Some cloth tapes will peel clean from surfaces, usually polycoated tapes perform better in this respect although surfaces should be tested if this is critical
* If you wish to write on the tape for identification purposes, uncoated cloth tapes may be the best choice. Alternatively, tapes with a matt surface will perform better than gloss coated tapes. Please request a sample to test if this is an important factor in choosing the tape
* Cloth tapes should be applied at between +10°C and +40°C
* Surfaces should also be as clean and dry with any loose material and dust removed as far as possible
* Tapes should be stored at a temperature of no lower than +5°C. If tape is left in a van or unheated warehouse in the winter months, it will need time to warm up prior to application
* The most popular colours for cloth tapes are black, silver and white. For a much wider range of colours, polycoated tapes offer the best choice.
|
|
|
This family of rugged cloth tapes provide adhesion to most surfaces in a variety of environments, including moisture and UV. Specific tapes may be used in specialty applications, like outdoors, offering clean removal for up to 6 months.
|
|
|
tesa offers a variety of coated cloth tapes and non-woven tapes, whose characteristics include flexibility, residue-free removal, and high adhesive levels on many surfaces. They have high physical and chemical resistance and are ideal for applications requiring abrasion resistance and waterproof traits.
|
|
Bellows
Arnold bellows offer safe protection for both people and machinery. These are the products to soke your problems - in which material, stability and shape can be individually customised.
If the bellows will be subjected to high mechanical stress and strain, the telescopic covers provide safe protection even at high processing speeds. Due to our patented mounting system, the telescopic covers will either be flexibly mounted or connected with the bellows without the use of adhesive materials under consistent counter pressure, if required and can also be coolant-compatible, if this is desired.
|
|
Stainless steel lamella : particulary resistant to sparks and shavings.
Following application, we can offer others solutions
|
|
TRANSPORT BAGS
The most resilient member of your team.
Made of tearproof, hardwearing material. With padded carrying handles, ergonomic shoulder strap, wheels and trolley handle.
|
|
Trident's FabricFastTM ULTRA ink is a pigmented, water-based ink for digital textile printing using Epson-based piezo inkjet printers.
Digital Revolution:
Inkjet printing for textiles has revolutionized the business by making short runs or even one-offs economically viable. At Trident, we believe that this flexibility should come without compromise.
Direct to [untreated] Fabric:
FabricFast inks are able to print directly on 100% untreated fabrics, including cotton, polyester and more.
Trident's FabricFast ULTRA ink is the new way to think inkjet ink. It is a pigmented water-based ink compatible with most of today's Epson-based color textile digital printers. FabricFast revolutionizes designing, sampling, and short run textile printing by offering digital ink jet print capability on a wide range of fabrics - including cotton.
The specially formulated ink provides the soft hand of dye-based inks with the wash fastness and light fastness of pigmented inks, all in an ecologically friendly water-base.
|
|
FabricFast™ ULTRA Textile Ink
Trident's FabricFast™ ULTRA ink is a pigmented, water-based ink for digital textile printing using Epson-based piezo inkjet printers.
Digital Revolution:
Inkjet printing for textiles has revolutionized the business by making short runs or even one-offs economically viable. At Trident, we believe that this flexibility should come without compromise.
Direct to [untreated] Fabric:
FabricFast inks are able to print directly on 100% untreated fabrics, including cotton, polyester and more.
Trident's FabricFast ULTRA ink is the new way to think inkjet ink. It is a pigmented water-based ink compatible with most of today's Epson-based color textile digital printers. FabricFast revolutionizes designing, sampling, and short run textile printing by offering digital ink jet print capability on a wide range of fabrics - including cotton.
The specially formulated ink provides the soft hand of dye-based inks with the wash fastness and light fastness of pigmented inks, all in an ecologically friendly water-base.
Color Gamut:
Digitial Textile Printing would be of limited use to anyone if the color range was not comparable to existing (analog) printing. Trident's FabricFast ink offers 11 colors for a wide color gamut as well as the capability of spot colors should need arise. Click on the links to the right for more information on FabricFast Ultra Inks.
|
|
| ... products without technical information |
| |
... see all the products in the category
Inks
|
| ... products without technical information |
| |
|
