|
|
|
Carbon-plated conductive fabric can solve some appearance problems such as stains, spots, etc. It also makes the products more resistant to oxidation. Accordingly, the long-term service life of the products is guaranteed.
|
|
Fabric over foam gaskets are made of a resilient foam core, bonded over with conductive fabric. More than 70 different profiles offer unlimited selection for any application. Some profiles contain rigid inserts. Metallized conductive fabric bonded to resilient core (available in urethane foam, neoprene sponge) offers a good shielding efficiency and works as a seal to block air, light and dust.
- UL94-V0 certified
- RoHS compliant
|
|
|
Trademark EMI gasket is a registered trademark of our company ,It's manufactured by PU foam wrapped with conductive fabric which been exported from Japan high technology enterprise ,can offer high shielding effective with low resistivity.
|
|
When your designs require EMI gaskets that exhibit high attenuation and low closure force, Metex Conductive Fabric gaskets are an ideal choice.
By combining a soft core with conductive fabrics, we have created a gasket that will provide >65 dB attenuation at 1 GHz, and compression loads under 4 lbs. per inch at 25% deflection. Low compression forces allow for lighter, less expensive enclosure designs.
Conductive Fabric gaskets are the ideal gaskets to use with conductive coatings that can be scratched or damaged by other more abrasive gasket materials. The conductive fabrics available include abrasion-resistant copper and nickel.
|
|
Profile and Input/Output (I/O) EMI shielding gaskets are available in UL94 V0 and HB flame retardant material. Laird Technologies specializes in quick turnaround of custom shapes and sizes of EMI shielding gaskets. Profiles can be cut to specified lengths, kiss-cut release liner or mitered to form frame configurations.
- RoHS compliant
- Shielding effectiveness of >100dB across a wide spectrum of frequencies (MIL-STD 285 mod.).
- Extremely low compression forces allow for use of lighter materials.
- Low Surface Resistively of <0.07 ohms/square provides improved conductivity (ASTM F390).
- Wide range of flame retardant gaskets available (UL recognized per UL94 V0 or UL94 HB.
- Abrasion resistant materials show virtually no degradation in shielding performance after 1,000,000 cycles (ASTM D3886).
- Service temperatures from -40 to 70° C (-40 - 158°F)
- Available with a variety of pressure sensitive adhesive (PSA) tapes.
|
|
|
Characteristics:Gold has excellent conductive performance and can guarantee the electrochemical compatibility and stability among base material in a very large range.can offering high shielding effective with low resistivity .fit for special environments.
|
|
Teubert Unimat
for processing EPP and EPS
The well proven standard machine in solid steel construction with guide bars
|
|
Casbar, pioneer company in the Madrid region for Polyurethane Foam deposition Sealing.
Due to the reaction of its components (this foam is a mixture of polyol and isocyanate) once they get in touch with the atmosphere, Polyurethan Foam used by Casbar provides a perfect sealing over any surface.
The deposition process over the panels is electronically controlled, which guarantees a complete homogeneity. On the other side, elastomeric foam is highly flexible and its density can be adapted according to customers’ requirements. Thus, the layer will depend on each application needs of getting collapsed under the material load (for example: irregular absorption of materials to be link, vibrations absorption needs, appropriate sealing by means of foam compression, etc.)
This manufacturing line over cold enables sealing injection over any surface and material, painted, pre-treated or raw material. Due to the high compressibility of the resulting foam, it absorbs, as a cushion, all the loads.
|
|
Injection machineThanks to her experiment, our team proposes a complete range able to answer your needs as close as possible :
* New machines:
* Discontinuous lines:
- Range ECO for a limited budget
+ capacity from 0 to 160 kg/min
+ Various Options
- Range PRESTIGE for the more pointed applications
+ capacity from 0 to 160 kg/min
+ Management in loop closed of the flows
+ Precision of the weight injected of 0,5%
+ Various Options
* Continuous lines:
- Our machines will be able to answer your requirements thanks to their many functionalities, while remaining however easy to use
* Renovated machines:
* Our park machines of occasions will be able to also meet your specific needs.
* The modification of your machines can be planned to improve your process, or to adapt your working tool existing to your new needs.
|
|
We have taken the wishes of our customers into account. By using new construction techniques and materials, we have achieved a lower price level for our tiebarless TVZ series, which makes this premium technology even interesting in the EPS business.
The original TVZ design used a hybrid drive system of electric and hydraulic. At the request of our customers, a hydraulic drive system with separate driving and clamping cylinders is now implemented into the TVZ machines.
This is an example of the customer driven design refinements which have lead to both design advantages and cost savings, helping to offset the surcharge of the tiebarless molding technique.
|
|
The standard product range of shape moulding machines laid out for steam pressures of 1.5 bar comprises steam chamber dimensions of 600 x 800 mm to 1,100 x 2,100 mm. Thus Kurtz can supply economic solutions for most applications.
Machine design is based on a solid closing unit with fixed and moving steam chamber and on 4 tie bars ensuring symmetric closing force by means of hydraulic cylinders situated on both sides.
The portal stand on the driving side provides easy access to the machine interior, shortening set-up times.
|
|
The expansion of the product range by special particle foam materials such as Expandable PolyPropylene (EPP), Expandable PolyEthylene (EPE) or copolymers has also considerably improved the options available to the manufacturers of mouldings to open up new sales opportunities by means of new applications. These particle foam materials make special demands on the machine building industry in terms of an increased closing force for the moulds. Kutz shape moulding machines of the HP-line can be operated with a steaming pressure of 5 up to 7.5 bar.
Mouldings made of EPP are especially suited for impact loads because of their mechanical properties. Therefore they are used more and more in the automotive industry for quite a long time now. These parts are featured by a high energy absorption capacity, a wide temperature range, a good ability to restore the original shape as well as by a simultaneously available recycle ability.
Well known applications such as sun visors and bumpers are nowadays supplemented by knee pads or side impact protection systems as they are used to increase the passengers' safety. Kurtz has accompanied this development permanently or was ahead of it having the matching machine concept for every application available.
|
|
From the development in 1990 to the leading sun visor supplier of complete machine and tooling systems for sun visor half clam shells.
Teubert delivers customized machines for the production of In-Mould Skinning and foam-backing EPP clam shells.
|
|
| ... products without technical information |
| |
Battenfeld Extrusionstechnik manufactures tailor-made solutions for foam profile extrusion:
Main applications include:
- window sills
- outdoor floor panels
- shutter panels
- beads
- frames, etc.
Foam profiles are mainly characterised by their low specific weight.
If high surface finish is required, a layer of rigid PVC can be co-extruded
|
|
Battenfeld Extrusionstechnik offers co-extrusion equipment for the production of sewage water PVC foam core and multi-layer pipes with output rates of 50 kg/h - 1000 kg/h and pipe diameters of 32 mm - 630 mm.
Major advantages are:
- depending on the raw material / blend used and the pipe diameter, the
use of PVC multi-layer or foam core pipes yield in significant material
savings of up to 30% at a cost reduction of up to 25% compared to solid
pipes
- proven Battenfeld technology helps processors to take advantage of that
potential .
Battenfeld Extrusionstechnik offers complete extrusion systems for PP foam core pipes for sewage water transport for pipe diameters of 32 mm - 160 mm.
Battenfeld Extrusionstechnik offers a special compact 3-layer spiral mandrel die for the production of PP foam core pipes which can be operated with 2 or 3 extruders.
Major advantages:
- significant weight reduction compared to solid pipes
- recycled material can be used for the inner layer
|
|
| ... products without technical information |
| |
... see all the products in the category
Extruders
|
| ... products without technical information |
| |
|
The Yeast Monitor is an instrument that measures the viable yeast concentration online and in real time. The instrument is ideal for incorporating into automatic yeast pitching and yeast harvesting systems measuring yeast slurries. Designed with the brewer in mind it can give a read out in a range of display units including viable cells/ml or % viable spun solids. It has proved to be a reliable workhorse in automating various brewery processes such as yeast pitching, yeast cropping, kraussening and controlling the feed rate to centrifuges
|
|
| ... products without technical information |
| |
|
E·A·Rsoft is made from a slow expanding, environmentally friendly, polyurethane foam material. We have successfully developed an earplug that provides evenly distributed pressure, giving flexibility, a good seal with optimum comfort. E ·A ·Rsoft Yellow Neons are also available with a blue vinyl connecting cord, for use in food manufacture and food process industries.
|
|
| ... products without technical information |
| |
Proportioning systems
These units are designed for cleaning and/or disinfecting floors and surfaces in the foodindustry:
■ food preparation areas (as full service kitchens,meat processing plants, vegetable processingmeat rooms, delicatessen, seafood stores,bakeries)
■ packing areas, trucks washing, loading docks,auto dealers, fitness facilities (locker rooms inschools, health clubs), etc.
MAIN FEATURES:
■ Easily removable non return valve andpolypropylene Venturi system
■ Connection direct to the water network
■ Low sensitivity to water pressure variations
■ Installation via 3 mounting screws
■ Antipollution valve
■ Nickel plated brass ball valve
■ Smooth and ergonomic surface,with profiled frontcover
■ Strong structure,protected against “waterhammer” effect
■ High chemical resistance
■ Gun with adjustable spray nozzle,completely covered with food grade rubber brass body (onlyfor EURO and KLYN systems)
■ 14 colour coded dilution tips
■ Food grade quality discharge tube
■ PVC discharge tube (only for POLYsystems)
■ 90 cm or telescopic (1 up to 2 m) atomisationdevice (only for POLYsystems)
|
|
| ... products without technical information |
| |
|
