|
|
| This is 9 range of boxes and enclosures able to house from 4 to 16 modules of 18 mm. Depending on the model, they are made in self-extinguishing or metallic material, equipped with DIM rails to incorporate modular equipment and have a wide range of accessories in the case of the CRD-CMD models, such as partial and total mounting plates, busbar supports, reinforced rails, etc that allow for large-scale industrial assembly. |
|
Liebert offers a wide variety of racks and enclosures. From basic to fully integrated and self-contained with air conditioning, UPS and wiring management.
Knurr - Our Knurr 19 racks provide a fully assembled aluminum extruded frame with a patented T Slot, offering many quick mount options. The enclosure is offered in heights of 42U and 47U, widths of 24 and 32 and depths of 40, 44 and 48.
Liebert Foundation MCR: The Liebert Foundation MCR (Mini Computer Room) is an air conditioned cabinet with integrated UPS protection and cooling, designed to ensure the long-term viability of IT equipment.
Liebert XDF - is a secured enclosure with integrated high heat density cooling, providing the benefits of big room support in a cost-effective package. Air or water cooled. |
|
| Even in the toughest ambient conditions. Current examples include: Compact, secure technologies for Industrial Ethernet, enabling simple modifications to production procedures. Modular enclosure technology is advantageous in terms of the rapid assembly and adaptation of controllers. At the human/machine interface, your ergonomic requirements are precisely realised with the Command Panel and Industrial Workstations. |
|
Construction:
-Back and side panels manufactured in 1.5mm sheet steel.
-Mounting plate manufactured in 2.5mm sheet steel.
-Door Manufactured in 2mm sheet steel with reinforcing frame.
Finish:
T&J standard cycle thermosetting epoxypolyester powder coating.
-Structure,door RAL 7032 textured finish.
-Mounting plate:RAL 2004 smooth finish(Also available for zinc coated)
Protection degree:IP 55 to EN60 529 NEMA 12.
Supply includeF
-Back and side panels(structure)
-Mounting plate.(Also available without mounting plate)
-4 Mounting plate suppots.
-Front door with reinforcing frame with 4 hinges a 4 point locking system.
-Cable gland plate supplied
-4 Lifting eyebolts |
|
The new CS compact enclosure is the ideal solution for applications where a larger wall mounting box than ETA "ST" range or a smaller free-standing cabinet than ETA "ATB8" range is requested.
Ergonomic design and solid construction are the key features of the CS enclosure, together with the possibility to fit standard ETA system accessories and a large cable entry opening.
This new product line will be offered in 6 single door sizes ranging from 600x1200x400 to 800x1400x400 and 6 double door sizes from 1000x1200x400 to 1200x1400x400. |
|
| Give us your statement of conditions, we have the know-how and experience to wire your electrical cabinets and boxes, whatever the final application. |
|
Rittal Electronic Systems offer "complete know-how" in the field of
electronic packaging
at a high level - up to Level 4.
For CPCI, VME and AdvancedTCA applications.
This means "plug & play" systems for extremely high data throughput levels in telecommunications, in the network and server segment, in
automation, in traffic guidance systems and in medical technology.
System solutions in a modern design, with super-fast backplanes,
with integral power modules and with effective climate control
concepts. |
|
4B INLINE JUNCTION BOX
- For use in Atex zone 20& 21
- Tough moulded nylon body
- Accepts 5 x 2,5mm2 cable cores
- Threaded to take standard M25 glands |
|
Junction Boxes Series 8102
Explosion protection to
CENELEC
IEC
For use in
Zone 1 and Zone 2
Zone 21 and Zone 22
Equipped with 4 hood type terminals and 1 PE connection
cable diameter range: 2 x 4 mm2, single wire
Robust polyester resin enclosure
Degree of protection IP 66
Junction Boxes Series 8118
Explosion protection to
CENELEC
IEC
For use in
Zone 1 and Zone 2
Zone 21 and Zone 22
Enclosures in glass fibre reinforced polyester resin
Supplied in 3 sizes
with 4, 5 or 8 terminals
with 3, 7 or 6 terminals and integral small equipment fuse on request
Degree of protection IP 66
|
|
A range of cabinet with multiple doors for the LV Power distribution created on the Areta structure.
Specific mounting kit allows the fitting out of:
- Front with door modules complete of with a self-lining locking system.
- Split cubicles with mounting plate adjustable in depth.
The Areta modularity together with a special union system make possible the joining of different modules.
The Areta multiple doors cabinets are supplied mounted, for this reason in case of order please specify the door disposition and the opening direction.
Protection degree: IP 55, according to EN60529.
Paint finish: Eta standard epoxy polyester powder coating. |
|
wall mounted stainless steel junction box, and Smart cabinets with a single front door in finely polished Aisi 304 EN-1.4301 stainless steel.
Its monobloc manufacture allows protection up to IP66 with a maximum resistance of IK10 complying with EN-60529 and EN-50102 standards and Nema 4x by UL. A drainage channel prevents any liquid contact with the polyurethene joint or hidden hinges.
Complies with all EC regulations.
Specially designed for placing switches, machine controls, meters and other cases where a high quality and a high resistance are required while keeping an attractive appearance
Officially approved for food, chemical, pharmaceutical, transformer and telecommunication industries for both inside and outside use due to the advantages of its high resistance to chemical agents and its durability
delvalle serves to order any measurements required, including custom built holes and cut outs both for door and case.
All models in stock for immedate delivery.
Special solutions:
Built to individual requirements
Stainless steel plinths
Metal legs
Window door
Manufactured in Aisi 316 EN-14401 stainless steel
Top quality electromagnetic EMC protection between frame and contact surfaces, guaranteeing a perfect electrical connection following EEC regulation 89/336. |
|
St range of wall mounting enclosures is one of the highest quality metallic enclosures available on the market. A well engineered project, which has been continuously updated and improved, has allowed the creation of a wide range of possible variations.
The actual ST range includes the following versions:
- 32 sizes manufactured from Fe40 sheet steel with blank door
- 19 sizes with glazed doors
in both single and double door versions.
ST range main characteristic is solidity obtained thanks to the considerable thickness of the sheet steel to the high technology and automation used for products and to the proper mix of the components.
|
|
- quality sheet steel, body 1.25-1.5 mm gauge (depending on model), door 1.5 mm gauge
- zinced mounting plate, 2.5 mm gauge
- surface protected by powder coating, RAL 7032 structure
- earthing for body, door, and mounting plate
- foamed PU door gasket / high protection class (>IP 55, EN 60529 / double door model: IP 54)
- hinges open 140°/180° to the right, DIN compliant
- available in many sizes, pre-configured ready for use
- sash fastener 3 mm double bit (bar lock for 1200 mm or taller models), can be exchanged for any other common lock system
- zinced mounting plate provides basic EMV protection
- cable entry through sheet steel bottom gland plate
- rail systems, glazed doors, wall mounting lugs, locking systems and other accessories available as listed in Accessories for Wall Mounted Enclosures or on request
- Wall Mounted Enclosures also available in stainless steel |
|
- principal design based on extremely strong, chamfered and welded sheet steel construction
- 1.5 mm body, 2.0 mm door and back plane sheet steel
- zinced mounting plate, 3 mm zinced sheet steel
- powder coated, RAL 7032 structure
- earthing for body, door, and mounting plate
- foamed PU door gasket / high protection class (>IP 55, EN 60529 / double door model: IP 54)
- hinges open 120°
- sash fastener with 3 mm double bit
- removable back plane
- sturdy two-piece bottom plates
- auxiliary components like plinths, wall mounting lugs, transport units, different locking systems and other accessories available as listed in Accessories for Floor Standing Enclosures, System Accessories, and on request |
|
Proline
- Industrial cabinet with type of protection IP 55
- Welded steel frame
- Static load-carrying capacity 600 kg
- Also available as EMC version
eurorack
- Type of protection up to IP 40
- Static load-carrying capacity 400 kg
- Frame dividable
- EMC versions also available
minirack
- Type of protection up to IP 20
- Side with built in handle
- Static load-carrying capacity 200 kg
Cabinet control system s-guard
- Stand alone and flexible security system for remote control, control and message all safety values of climate and operation of networking devices
Socket strips
- socket strips: SCHUKO, UTE, IEC and US
|
|
| It is largest of electric box and the selection range was made more expensive, and it was New technology of the plastic Box. Big Box selected and supported by the packing development institute of industrial design. Through the use of special waterproof and dustproof tests, contained parts are protected well. The use is simple as big type Sensoe, Relay Box, Sleeve, Power Water Tool Box, Junction Box and Control Box. The dimension is 600x800x120 mm. All of the products are waterproof and dust-free. (IP66~67 NEMA 4X) Refer to the general catalogue of HIBOX on Direct-Industry or www.dsehibox.com |
|
Meets a large numbres of installation needs in industrial and similar premises. With a modern and attractive design it blends well into any seetting.
In version IP66, the DOMINO Systems offers a complete range of consumer units and sealed mounted enclosures for distribution assemblies. They are extremely flexible in the ways they can be used and may also be englarged. |
|
| GE's multipurpose enclosure range for indoor and outdoor applications has the answer when you're in need for permanent and safe protection of electrical and electronic equipment. |
|
Junction boxes, cabinets and control stations for increased and intrinsic safety EEx e / ed / ia /eia / deia.
Aluminium, polyester and stainless steel (316L). Boxes assembling. |
|
WISKA COMBI. The Bellied box.
The junction boxes with the distinctive 'bellied' lid provides the utmost in visual and functional perfection. |
|
Junction boxes are intended for a special - typically swiss - installation technique. It consists in establishing branchings from laid through conductors. The involved material are a baseplate fitted with branching terminals and a cover.
Further junction boxes of thermoplastic, polyester or thermosetting material are available for the same type of application.
|
|
SERIES CUBIK
SCAME proposes with series CUBIK, two new ranges of distribution boxes for electrical installations. They are available in 6 different dimensions. Made out of thermoplastic without halogen, shock-proof and self-extinguishing, the boxes of series CUBIK lend themselves particularly to the use for derivations in tight electrical installations of outside and for housing of small apparatuses.
The technical main features of this series are the following ones: index of protector IP55, possible use between -25° and +60°C, of color gray RAL7035, possibility of writing on the interior part of the lid to allow the simpler identification of the circuits, lid with pressure or closing by means of 4 screws 1/4 of lathe. All the lids are unlosable thanks to a provided bond which links base and lid (gone up out of standard). And finally, all the versions are equipped with plugs for complete insulation. |
|
| These boxes are for distributing electrical power (maximum 40 KVA) to service industry, craft industry and manufacturing industry buildings: storage warehouses, garages, maintenance hangars, sheet metal workshops, wine cellars ... |
|
STAINLESS STEEL ENCLOSURES LA BUSSIERE
These enclosures are developed for food, chemicals, oil paper, pharmaceutical industries, ..., where it is required a strict hygiene or a high resistance to corrosion. We offer 2 types of polishing : brushed or micronized in stainless steel 304L (316 on request). |
|
2 types of enclosures are available, PLOMBIERES which is a monobloc enclosure and BLIGNY which allows to give the possibility to take out the back panel to make easier the wiring. These enclosures were designed to be able to receive customized mounting systems thanks to possibilities of steel and isolating modular distribution and accessories. The PLOMBIERES range is composed by 17 references with 7 different heights as the BLIGNY range has 20 references with 3 different heights.
These 2 ranges are completed by a wide range of accessories as the modular chassis, rails for brass terminals, depth adjustable brackets, vertical, width and depth profiles, ... |
|
MODULAR ENCLOSURES FLEUREY
The FLEUREY enclosures have been designed as a complement of BLIGNY enclosures. They are welded made of sheet steel 15/10. The top and the base have been welded to the vertical pieces of the body giving more rigidity. The back and side panels are easy to install by quick fixing out. Enclosures FLEUREY have got 3 heights, 4 widths and 3 depths which is traduced in 33 types.
This range is completed by a wide range of accessories as the modular chassis, rails for brass terminals, depth adjustable brackets, vertical, width and depth profiles, ... |
|
CR SERIES
Intended for secondary distribution on construction sites, for the different areas of the construction trade and for dispatching power to different floors of buildings being constructed or renovated. |
|
AS SERIES
Control panels designed for larger construction sites. The ASI series is particularly well suited to industrial construction sites: 400V neutral-free three-phase network. |
|
|
|