|
|
-Molded hinge type&latch type
1. Molded hinge&latch design is easy to separate the cover from the base for printing or processing holes&cutting.
2. It protects inner components from dirt, dust, oil, water by roof guard on top&cover gasket.
3. Type 4X&IP67 for indoor&outdoor application by neoprene gasket seal
4. Available 46 kind sizes from 90x120x70 mm to 630x830x285 mm
5. Selectable gray or clear cover
6. Available stainless steel wall mounting bracket
|
|
|
The FAMI polypropylene stacking and storage containers have been designed and produced to offer companies rational solutions to their various material storage and handling requirements. First class raw materials, together with detailed structural research are the basis for this top quality product. The wide range of containers is available in five colours to allow the storage of materials in easily recognisable categories.
|
|
In industrial processes different parameter measurement systems are mounted to optimize and control the process. Housings are a very important part of the whole system as they allow to insert the sensors into the media at a specific place in the process (pipe, vessel or basin).
Depending upon process requirements and the type of electrode/sensor used (pH/ORP, DO, conductivity, turbidity, CO2), the design and function of the housing can vary considerably. The demands placed on process adaption methods by plant manufacturers, endusers and not least legislation, are numerous, particularly in the interests of process reliability, e.g. sterility/hygiene, and operator safety.
METTLER TOLEDO offers, apart from their world-famous INGOLD weld-in sockets, a wide selection of housings to cover the manifold requirements of the process industry, from simple static models throughto sophisticated and certified retractable versions for automated sensor cleaning.
|
|
This enclosure is NE-1515: The dimension is 150X150X90 mm.
We have enclosure from 50X65X55 and 80X82X60 mm
We have a various of this kinds of small plastic enclosures.
Just check them out at www.dsehibox.com
IP66-67, UL 5VA 4X type
-1/4 weight of metal box enables easy carriage and efficient work. Corrosion-resistant and superior insulation
-Waterproof and dust-free product which gets through strict quality inspections. Proved quality in many related tests.
-Convenient to use for console-alternative rail and button box, mini terminal, signal box, gauge/meter console, communication connection box and etc.
Refer to the general catalogue of HIBOX on Direct-Industry.
|
|
The OKW small plastic enclosures covers many different fields of application.
OKW products are incomparable in design and, thanks to their high level of technical development, are the ideals solution for comfort-oriented case users who are looking for something special.
Our wide range of services allows us to find fast, cheap, individual solution for you.
|
|
Stainless steel cabinets are used in both corrosive and food processing environments. ARETA has been manufactured in stainless steel without changing its design structure or its accessories, thus providing all the benefits offered by the standard painted version.
The clean external finish gives the product an aesthetically very pleasant and highly professional appearance.
|
|
HI-BOX's Wall mounting enclosures are manufacured by HI-resistance polycarbonate, polyester, and ABS. These wall mounting enclosures are suitable for fire-fighting and environment facilities. (good for outdoor) There are two kinds of enclosures: one is hinge type. The other one is screw cover type. We provide working for hole on enclosure by request. Also, we serve for supplying HI quality products with wide color tone and various colors in accordance with your requirement.The dimension of HIBOX's NICE BOX is from 100x130x70 mm to 500x700x 250 mm. Also, all of HIBOX's products are waterproof and dust-free. (IP 66~67, NEMA 4X)
Refer to the general catalogue of HIBOX on Direct-Industry or www.dsehibox.com
|
|
œ Material: Die-cast aluminum
œ Most of 11A and 11B series boxes meet IP65 of IEC60529 dustproof and waterproof requirement
œ A wide range of size
œ Designed for mounting P.C.B.or DIN rail mounted terminal
œ Sand-blast finish of terminal boxes is painted in bone, as well as baking finish of amplifier boxes is mid-grey
œ EMI shielding
œ Construction with carbon fins for 11B series boxes
œ Stainless steel screws
œ Standard delivery:
1 box,1lid,4 or 6 screws,1 seal(some of 11B series include shielding -ring)
|
|
¡¤ Protection class up to IP 65
¡¤ Temperature range -40¡æ¡«120¡æ
¡¤ Defend corrision
¡¤ Better conducting heat
¡¤ Easily tooling
¡¤ Defend RFI
¡¤Capability of expansion of mould and component by the prefabricated screws
¡¤ Wall mounting application
¡¤ The box and the cover can be earthed
|
|
With its ALUBOX series Scame is offering a range of metal products sure to satisfy specific installation requirements in situations that demand a robust product.
With its excellent mechanical resistance and the strength to counter climatic and environmental stresses, the ALUBOX series is particularly well suited to environments that are harsh because of the kind of work carried out there - heavy industry installations, installation right beside a machine, for industrial automation, on board ships, for thermal, chemical and petrol chemical plants - even outside.
The ALUBOX series aluminium junction boxes are suitable for using in environments of major fire risk (CEI 64/8 part 7) and in AD-FT installations according to the specifications of the CEI 64-2 norm.
|
|
Key Features:
- Seamless Deep Drawn Construction
- Numerous Trim Heights Available per Housing
- Various Alloys and Tempers Available
- Short Lead Times on Standard Products
- Numerous In-house Capabilities to Modify Your Housing
- Great for Prototyping
- Three Standard Nutplate Configurations Available on Select Housings
ZERO Manufacturing, Inc. is the premier manufacturer of deep drawn aluminum enclosures. Available in over 32,000 pre-tooled sizes. For seamless, draft-free construction in aluminum enclosures look to ZERO.
It all starts with a single sheet of metal. ZERO uses only the highest quality aerospace aluminum alloys. Although we most often recommend aluminum as a durable medium, we also provide deep drawn Products in brass, copper, cold-rolled steel and mu-metal (in select sizes).
Standard lead time is 6-8 business days for all stock items.
Standard lead time is 12-14 business days for all non-stock items.
All non-stock items incur applicable set-up fees.
|
|
|
|
|
|
Aluminium-Enclosures are universal, stabile and easily adapted. “Packaging” electrical, electronic and pneumatic components.
They are very sturdy and easily mechanically machined and can be painted to the customer’s specifications in small numbers. As Clamp Enclosures, they are constructed as a modular system and can be fitted with clamps and cable screw connections and are used as a junction enclosure for electric cables and wires. The control enclosure has the function to protect the highly sensitive electronics against water, dirt and dust. They are frequently used as enclosure for voltage sensors in the measurement and control technique. The production is carried out in pressure casting or die-casting. All enclosures comply with the protection class IP 66 according to DIN 40050 (spray water protected). The standard colour of the enclosure is RAL 7001. The lid screws cannot be lost and are made of stainless steel. The mounting of the enclosure is completed outside the sealed area using separate mounting grooves. The Neoprene lid seal is resistant against oil and petroleum, special seals such as silicone are available when requested.
|
|
|
The Ensto Cubo H range meets the requirements of the machine and military industry as regards resistance against solvents, petrol and oil. Excellent temperature, impact and RFI/EMI (additional gasket required) resistance. The Cubo H enclosures are made of cast aluminium, sides always plain, colour grey RAL 7001. Enclosures are available in 26 different sizes.
|
|
Isolating critical controls from harsh environments is a job no one performs better than Hoffman. Our revolutionary enclosure solutions ensure reliable performance in a range of extreme conditions.
Aluminum Wall-Mount Enclosures
Clamp Cover
* Continuous Hinge with Clamps, Type 12
* Clamp-Cover, Type 4X
* Continuous Hinge with Clamps, Type 4X
COMPACT® Cast Aluminum Type 4X Enclosures and Accessories
* COMPACT®, Type 4X
* Hinge Kit
* Mounting Bracket Kits
* Panels
* DIN Type Rails
* Aluminum Type 4X Accessory Selection Matrix
|
|
|
A wide range made up of monobloc enclosures for wall or floor fitting, made in sheet steel painted with polyester resin or manufactured in stainless steel. Combinable modular enclosure systems, ideal for building up large frames and control desks.
|
|
Console system
Flexible console system, allows a versatile number of combinations to configure the system to your design. A range of 19" accessories adds further versatility. Available in both Mild and Stainless steel.
- MPC / MPCS, Console combination version, single or double door
- In mild steel and stainless steel
- MPG / MPGS, Console compact version, single or double door.
- In mild steel and stainless steel
|
|
l Hosing shell moulded in ABS
l Mount easily onto standard DIN rail
l With base for mounting rail
l PCB can be connected with terminal by welding
l Fast mount due to screwless assembly
l Custom material and color avilable
l Temperature range -20°C - 70°C
|
|
EURONORD range is designed to house DIN-rail mounted terminal block and various types of sensors. EURONORD enclosures are available in polycarbonate, ABS, polyester and aluminium. There are more than 170 different off-the-shelf versions available.
Dimensions range from 50*45*32 mm to 360*400*151 mm
PC: IP 66/67; IK 07/08; NEMA Type 1, 4, 4X, 12 and 13; UL 94-5V; UL 508
PCQ: IP 65; IK 07/08; NEMA Type 1, 12, 13
ABS: IP 66/67; IK 07; NEMA Type 1, 4, 4X, 12 and 13; UL 94 HB
ABQ: IP 65; IK 07; NEMA Type 1, 12, 13
AL: IP 66/67; IK 08; NEMA Type 1, 4, 4X, 6, 12 and 13
P: IP 66/67; IK 08; NEMA Type 1, 4, 4X, 12 and 13; UL 94-5V; UL 508
|
|
Wall mounting enclosures :
The balance between pure design and total pragmatism is never easy to achieve. The unique Eldon Multi-Mount® enclosure will make your specifi cation and component requirements easier to come up with. Making your enclosure both practical and aesthetically pleasing at the same time.
Floor standing enclosures :
Nowadays, mounting speed is one of essence and Eldon Multi-Flex® enclosures belong to the fastest you'll fi nd on today's markets. With fewer parts than our previous designs, which means that availability of the parts you need is always high.
|
|
Features :
Net-Access™ Server Cabinets
- Inset frame posts create large and accessible vertical pathways for routing cables and mounting vertical patch panels and Power Outlet Units
- Include vertical blanking panels to block bypass air and direct cold air through servers
- Modular cable management finger sections manage cables for greater routing flexibility
- Innovative, fully integrated, electrically bonded cabinet with a single ground connection to guard against EMI and ESD, and provide a safe current path to ground
- All welded frame construction
- Adjustable rear cage nut mounting rails
- Doors include keyed swing latches
- Side panels include keyed pushbutton latches
- Equipment mounting depths up to 29" (736.6mm)
- Durable black polyester epoxy powder coat finish
- UL Listed 2500 lbs. (1134 kg) load rating
- Cabinet ships assembled, one per pallet
- For the complete grounding solution, see the StructuredGround™ Kits for Cabinets
|
|
Weidmüller offers a wide range of enclosures for the protection of circuitry, components and devices. These products have been developed to suit a wide range of applications and environments.
|
|
Plastic modular electrical enclosure mini Pragma
Description
Plastic modular electrical enclosure flush mounted or surface mounted
Plastic modular electrical enclosure range, surface mounted or flush mounted, 50 to 63 A
From 1 to 3 rows
From 4 to 36 modules
Translucent tinted or white door
Options
Flush mounted : 5 colors (white, ivory, mist grey, pistachio, garnet)
With or without terminal blocks
Lighting indicator function
Lock
|
|
|
An extensive range of enclosures and accessories that let you install any voice and data application in any area, be it industrial, services or tertiary sector.
|
|
Each model includes two aluminum end panel and all hardware
PCB can be slide into internal slots pre-extruded in the enclosure body
The depth of enclosure body is variable upon customerfs request
Surface of enclosure is painted in black(35A series)or clear anodized(35C series)
The 35C series enclosure includes two plastic bezel kit(UL 94-HB)
Custom special colors available upon requirement
|
|
The two part Electronic Enclosure in a shapely version made of shock toughened Polystyrene is especially suitable for the “packing” of small control systems and tabletop units. An excellent stability is reached through groove and clip sealing.
Open side parts of the lower enclosure allow a swift mounting of the components. In the standard specification, it is possible that the lid of the lower page is hidden-screwed, optionally with a lid fastener of the lid upper page. Specification with air slots (Protection class IP 20) or with integrated Schuko plug is deliverable immediately.
Temperature resistant: - 20°C to + 60°C
Standard colours: Lower part dark grey similar to RAL 7012. Upper part light grey similar to RAL 7035. Special painting or with See-through lid available on request.
|
|
|
|
|
|
Standard cases
There is a very great selection of standard cases at our disposal for carrying out your projects in-house, as well as a very large variety of processing technologies.
The advantages for you as our customer are obvious – make use of them!
* Manufacturer-independent consulting based upon your specifications
* Profound knowledge of the market and many years of experience
* Extremely large number of perfected cases, as well from own development and fabrication, as from world-wide acquisition.
There is often a price benefit resulting thereof, because of the selection of cases which are already close to the desired product in there basic conception. Moreover, our customers appreciate the wide variety of design resulting from this, and the optical difference from widespread case types of the market leaders
* For modifications in large quantities or ones which cannot be realized mechanically, or only with great difficulty, the exchangeable tools designed in close cooperation with the device manufacturers offer a cost-effective solution
* Problem-free implementation and processing of customer-specified foreign products
* As a matter of course, you can also make use of our processing service for customer-provided cases
* Price benefits because of world-wide delivery contracts as well as purchasing of large quantities
* Development and fabrication of cases and enclosures up to complex complete solutions
|
|
SOLID range is an excellent choice to house electronic and electrical components. It is also an ideal alternative to polyester enclosures. It is available with screw and hinge covers in both polycarbonate and ABS.
Dimensions range from 188*188*130 mm to 558*378*180 mm.
PC: IP 66/67; IK 08; NEMA Type 1, 3, 3S, 4, 4X, 6, 6P and 12; UL-94 5V; UL 508
ABS: IP 66/67; IK 08; NEMA Type 1, 4, 4X, 6, 12 and 13; UL 94 HB
|
|
We package your electronics! The Weidmüller range of products for housing your electronics comprises numerous different open and closed types for mounting in electrical cabinets or for installation directly in the field.
Our modern and innovative electronics housings are successful because of the synergy between design, connection systems and functionality. These success factors form the focus for the ongoing developments and expansion of the range of electronics housings to meet your future needs. CAD data for PCBs can be provided for all housings, and users can choose between screw or tension clamp connections.
|
|
Deep Drawn aluminum enclosures are our specialty. Zero Manufacturing perfected the deep draw process, and now we have the largest range of tooling in the world. No matter what the required size and shape, ZERO can handle any deep drawn requirement.
The numerous advantages of deep drawn aluminum products are clear. ZERO uses only the highest grade aerospace aluminum throughout the deep drawing process; these light weight aluminum alloys, known for their strength, are also incredibly resistant to corrosion. Aluminum enclosures provide excellent resistance to breakage and fractures, and optimal protection against water and even salt damage.
In-house customization and modifications are available for all our aluminum products. For seamless, draft-free construction in aluminum enclosures, precision miniatures, or deep drawn cans look no further than ZERO for all your manufacturing needs.
|
|
|
|
