|
|
The wide range of items in this wall enclosure system for use in measurement and control applications is available in 8 basic sizes, each with 6 different designs.
To permit the insertion of mounting plates and PCB's, all designs have vertical and horizontal grooves which ensure optimal unit assembly.
The terminal compartment can be separated from the actual electronics area by means of integrated grooves with separated plates.
In addition, extra protection is possible by using lead seals in the standard though holes.
As required, the enclosure can be mounted on the wall (with the terminal compartment upwards or downwards) by means of the integrated three-point wall fitting. Depending on the design, the enclosure are fitted with Pg rated break points (model RCP...(F)) or metric rated break points (model RCPM...(F)). For minimum order quantities of 500+, the front of the terminal compartment can also be supplied without pre-punchings.
|
|
Often overlooked until the last minute, the terminal box plays an important part of most projects.
Although a price sensitive product, the terminal box is traditionally used in large quantities and needed in a hurry. After reviewing our current range of terminal boxes, we have decided to reduce the number of sizes and options available, and concentrate of a number of core sizes. Our intention is to invest in more inventory, albeit in fewer sizes, so we can offer more product from stock more of the time.
|
|
As a result of the different dimensions and height options, this ABS plastic enclosure adapts itselfs superbly to your individual space requirements.
The various accessories mean that you can use Ultramas as a desk or wall enclosure in either a horizontal or vertical position.
Alternatively, the enclosure half-shells and extension sets are also available with moulded-in air vents ex warehouse and at no extra charge.
The recessed surfaces on the top parts are designed to accommodate displays and operating elements, in particular for the flush fitting of membrane keypads.
|
|
Sturdy, flexible and portable, modular, elegant design, EMC, IP, Handles & Feets i. e. for the use in Test & Measurement. General electronic packaging and medical industries.
|
|
ratiopacPRO / -air
- Case with 19"-compatible dimensions
- Identical front and rear structure (symmetrical)
- Identical space for boards in all versions
- EMC shielding optional via gaskets
- Suitable for extraction handles complying with IEEE 1101.10/11 for CompactPCI and VME 64x applications
propac
- Desktop case or portable case p case or portable
- Design alternative for compac
- Degree of protection IP 20
- EMC shielding optional via gaskets
- Extensive accessories, for portable applications
- High stability
compac
- Desktop case or portable case
- Degree of protection IP 20
- High stability, configured for portable application
- Identical front and rear structure
comptec
- Can support 19" subracks
- Height 3 U to 12 U
- Degree of protection IP 20
- High stability
- Identical front and rear structure (symmetrical)
- With protective earth connection
|
|
DIN-MODULAR CASES TYPE A:
The DIN-MODULAR CASES TYPE A differ from conventional systems for mounting control panels complying with DIN IEC 61 554 through simple, screwless assembly of all case parts. This reduces production work and ependiture to a minimum. A further advantage of this design principle is the implementation of flexible case lengths to match the application exactly.
DIN-MODULAR CASES TYPE B:
THE DIN-MODULAR CASES TYPE B is available in 3 different case designs.
- For horizontal slide-in mounting of PCBs from the front, there are closed cases with removable front frame and rear panel.
- Versions with separate lids allow vertical and horizontal slide-in PCB assembly.
- A special version for 19" racks rounds off the comprehensive range.
|
|
|
Housed in tough ABS boxes and panels these IEC EN60320 Distribution Units have combinations of four, five or six outlets together with neon indicator, fuse and switch options. The three sizes are available in various combinations and, other than the compact version, all have shuttered outlets. The larger enclosed versions are also available with EMI filtering.
|
|
IP67-IP55 ENCLOSURES FOR SOCKETS AND AUTOMATICS SWITCHES
PRYMA Enclosures for sockets and automatic switches are provided plain or equipped with sockets and wiring, in any combination and without minimum order quantities required.
They are sealable, UV protected on windows and also completed with fastening and turning hinges with a locking device to assure their watertightness.
They are made from halogen free long-lasting plastic material. DIN rail can be fixed to the frame, and also, to the base without the need of screws. Holders are included on the enclosure to fix mounting plates and they are ready for earth and neutral bar installation. Cable entries are adapted to the metric system and sockets wiring is carried out under electrical engineering preceptives.
|
|
IP 66 and the exceptionally high stress-resistant qualities of aluminium make this an ideal enclosure line ehen optimal protection is required.
43 different enclosure dimensions and a series of accessories provide the best-possible solutions for a wide range of applications.
On request, the enclosures are available in special colours, or uncoated.
If you require extremely high protection, the enclosures can be fitted with special EMC screening, or coated with special sea-water reststant lacquer. When fitted with hinges and locks, the enclosures are suitable for use as small, sturdy cabinets.
Different lock and hinge systems are available for this purpose.
All Euromas aluminium enclosures are UL-listed.
|
|
ES, the free-standing enclosure with firmly linked side panels.
TS 8, the Top enclosure system, a system platform for individual tasks.
Every enclosure, with all-round accessibility, is a specialist – however particular the task in hand.
|
|
Thanks to their versatility and the comprehensive range of accessories, these robust, attractive enclosures can be used for a wide range of applications.
With its eye-catching visual design, which includes seals as a design element, it makes any electronic components look good.
ALUBOS enclosures are available with profiles which are closed, divided horizontally, and open on one side.
The lengths of all profile types are so variable that the result is a universal, ergonomic, individual hand-held enclosure in your special design.
Ingress protection up to IP 65, the high mechanical loading capacity of the profile and good EMC screening ensure a high level of protective functions even in the standard design.
|
|
Mobile enclosures are one of the main areas in the developement of new products at OKW. This makes it possible for us to present to you the whole variety of our system.
Depending on the type, the cases are already prepared for the use of standardised LCD and graphics displays, standard batteries and rechargeable batteries, PCMCIA cards, switches and membrane keyboards.
Mobility and ergonomics:
The working world is becoming increasingly mobile. We at OKW have made it our goal to offer you the cases to make this possible, with optimum user-friendliness and functionality. In the development of new solutions, therefore, design and product ergonomics are the main focus.
Design for people:
Attractive, high-quality, up to date. We use design-oriented case technology to create the basis for an increase in the value of your products.
Love to details:
- high-quality surface for the visual and tactile senses
- polished front surface for optimum efficiency level with infrared versions
- combination of different plastic material for improved touch sensation and protective function
- innovative technology
- the same aesthetic standards for cases and accessories for a harmonious whole
|
|
This hand-held enclosure series made of ABS combines ergonomic design, flexibility, all to the user's advantage.
The unified design concept which range over 6 sizes in combination with cover caps in various colours gives any electronics individualised good looks. BOPLA-ARTEB offers different possibilities for individual voltage supplies to suit your enclosure application.
With 4000 possible combinations, the BOPLA-ARTEB-series is perfect for dealing with customer-specific requirements.
|
|
The comprehensive range of wall-mounting cases offers you a wide choice.
Application-specific orientation is typical for each family of cases
Your advantages:
- Ergonomic operating area.
- Practical for service personnel.
- Without/with separate terminal compartment.
- Robust construction.
- Modern design.
- comprehensive range of accessories.
|
|
Smart cabinets with a single front door in finely polished Aisi 304 EN-1.4301 stainless steel.
Its monobloc manufacture allows protection up to IP66 with a maximum resistance of IK10 complying with EN-60529 and EN-50102 standards and Nema 4x by UL. A drainage channel prevents any liquid contact with the polyurethene joint or hidden hinges.
Complies with all EC regulations.
Consoles
Elegant, functional consoles manufactured in finely polished
Aisi 304 EN-14301 stainless steel, easily accessed whose design allows for an IP55 protection and maximum resistance of IK10.
Upper door with shock absorbers which makes opening easier, with open bottom and hidden hinges.
It comes with a galvanised mounting plate
Officially approved for food, chemical, pharmaceutical, transformer and telecommunication industries for use both inside and outside, due to the advantages of high resistance to chemical agents and durability.
delvalle serves to order any measurements required, including custom built holes and cut outs both for door and case.
All models in stock for immediate delivery.
Special solutions:
Custom built to order.
Plinths (page 19).
Metal legs.
Polycarbonate window door.
Manufactured in Aisi 316 EN-14401 stainless steel.
Bakelite isolated or stainless steel mounting plate.
Superior EMC electromagnetic protection between frame and contact surfaces which guarantees a perfect electrical connection. EEC regulation 89/336.
|
|
The compact terminal enclosure
The CombiNorm-Control was designed to hold double-pole PCB connection terminals, and two of its advantages are its compactness and versatility.
The CombiNorm-Control enclosure is supplied in three widths and, depending on the design, can hold up to 16 double-pole terminals. Terminal sockets which are not required can be closed by the use of covers.
Accessories include light guides and adjustment axes for coding switches.
|
|
Protection degree is IP65 according to EN50298 NEMA for single door, IP55 for double door.
Four or six studs are welded inside the boxes (with the exception of 150mm depth enclosure), allowing the mounting of both an inner door, a modular chassis, a rack frame or the mounting plate adjustement system.
All the accessories are supplied separately so that to increase flexibility and optimizing finished products inventory.
|
|
Stainless steel type Wall Mounted Enclosures, Floor Standing and Suite Enclosures, Desk Consoles, Terminal Boxes, Command Panels and special enclosure models are used in harsh environments or hygienic applications, e.g. in the chemical industry or the food and beverage sector. Their technical properties (high IP class and special EEx design, where applicable) ensure full protection even under extreme conditions (low temperatures, high humidity). Selected accessories complement this range to enable conclusive enclosure solutions.
Stainless Steel Wall Mounted Enclosures, Standard:
- enclosure and door made of 1.5/1.25 mm gauge stainless sheet steel material no. 1.4301
- enclosure fully self-contained
- door fitted with double chamfer along all edges for increased stability
- concealed hinges
- door opens ca. 147°
- door fitted with 4 M6 fastening bolts
- rubber profile along all edges (IP 65 compliant, EN 60529)
- sash fasteners with 3 mm double bit insert
- 2.5 mm sheet steel mounting plate, screwed to fitting profiles
- earthing for enclosure, door, and mounting plate
- 4 drillings in the enclosure's back plane (fitted with plastic blanking plugs) suitable for wall mounting lugs or to be used for direct wall mounting
- outside surface smoothed
|
|
Terminal boxes of all sizes and design types provide high dust and water ingress protection at and around cable clamps and other connections. Access protection is designed to ensure electrical and mechanical safety as mandated by the VDE. Terminal boxes are particularly well suited to house small PLCs, so-called intelligent terminal blocks or bus blocks.
- sheet steel housing, powder coated RAL 7032 structure
- narrow chamfer on the body, robust drip rail design
- good overall accessability
- extensive range of accessories
- optional hinged covers with sash fasteners
- foamed PU cover gasket
- foamed PU door gasket / high protection class (>IP 65, EN 60529)
- captive cover screws in plastic sockets
- precise contact pressure due to fixed tap hole depth
- removable cage nuts allow for good accessibility of drillings for wall mounting (even in fully fitted enclosures)
- pre-punched back plane knockouts with blanking plugs
- mounting plate rests on embossed portion when interior profiles are removed
(i.e. clearance is kept for rivet heads)
- removable yellow chromated interior profiles (no doubling of material), variable mounting depth through profile extensions or use of spacer bolts
- zinced support rail or mounting plate makes conductive contact upon installation (excellent conductivity due to copper-plated threaded weld studs)
- also available in stainless steel
|
|
|
At the time of delivering the goods, the Draw Latch-Hinge and Particular Locking Device are equipped and its opening-closing is made simple, and it is a cabinet shape product. The delivery-time of our products is promptly made from our own factory with low price and the diverse sizes also the accessories which make the consumer's satisfaction. HIBOX has a various kinds of control boxes. The dimension is from 200X300X150 mm to 500X400X200 mm or 400x 600x 230 mm. All of the products are waterproof and dust-free. (IP 66~67, NEMA 4X) Refer to the general catalogue of HIBOX on Direct-Industry or www.dsehibox.com
|
|
Compressed air and electrical outlets within easy reach
The power box provides a simple and safe means of powering:
- pneumatic tools
- blowers
- electric power tools
- and inspection lamps
Suspended from the ceiling at the desired height, power boxes make life easier for operators by avoiding:
- the need to move around the workshop
- hoses trailing on the floor
- tedious operations in the workspace
The built-in handle and hanger makes it easy to grab the box while freeing space at the operator's work position.
|
|
For application under extreme conditions ELEKTRA offer with these products custom-built solutions:
Connection cabinets
Group distribution and main distribution cabinets
Distribution-final distribution cabinets
Connection-distribution-final distribution cabinets
Subcontractor cabinets
Final distribution cabinets
Socket distributors
Small type distributors
|
|
|
Boxes polyester sealing IP65: dimensions of 300x250x160mm with 600x500x250mm, carries full or transparent, accessories (platinum of assembly, handles, locks, mural feet mounting,...)
|
|
The product weighs approximately 1/4 the weight of an iron box and can be easily installed or moved. The product is free from corrosion, carries superior insulation.
The product has passed waterproof and dustproof tests carried out under rigid quality standards. ( IP 66 -67)
The use is also convenient for the installation of Terminal Substitution Rail, Button Box, Small Terminal, Signal, Relay and Sensor, Communication and Joint Box etc.
Refer to our E-Catalog on Direct-Industry. There are more story.
|
|
|
Vibra-metrics offers a full line of six through 48 channel NEMA 4 vibration sensor switchboxes which allow safe and speedy data collection in dangerous or inconvenient areas. Since probes are mounted permanently, more repeatable and useful data is gathered, improving your PdM process.
|
|
|
